PS204S

PS204S PS204S 2.5AMPS . SILICON RECTIFIER DO-15 FEATURE .High current capability .Low forward voltage drop .Low power loss, high efficiency .High surge capability .High temperature soldering guaranteed 260°C /10sec/0.375" lead length at 5 lbs tension 1.0(25.4) MIN. .Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C .Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy .Polarity: color band denotes cathode .Mounting position: any DIA. + .300(7.6) .230(5.8) MECHANICAL DATA .140(3.6) .104(2.6) - 1.0(25.4) MIN. .034(0.9) .028(0.7) DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20% SYM BOL Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) lead length PS204S units VRRM VRMS VDC 1000 V 700 V 1000 V IF(AV) 2.5 A IFSM 80.0 A VF 1.0 V Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 2.5A DC Maximum DC Reverse Current @TJ =25°C at rated DC blocking voltage @TJ =100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage Temperature Operation Junction Temperature 5.0 IR 100.0 Cj R(JA) TSTG TJ 30 pF 50 °C /W -55 to +150 °C -55 to +150 °C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375"（9.5mm）lead length, vertical P.C.Board Mounted 1 µA PS204S RATING AND CHARACTERISTIC CURVES (PS204S) INSTANEOUS FORWARD CURRENT,(A) 2.5 1.25 Single Phase Half Wave 60Hz Resistive or inductive Load TJ=25℃ Pulse Width=300μs 1% Duty Cycle 0.8 1.0 1.2 LEAD TEMPERTURE,(℃) INSTANEOUS FORWARD VOLTAGE,(V) FIG.3-MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS 80 60 FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 8.3ms Single Half Sine-Wave (JEDEC Method) 40 20 INSTANEOUS REVERSE CURRENT,(μA) PEAK FORWARD SURGE CURRENT,(A) AVERGE FORWARD RECTIFIED CURRENT,(A) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 1.4 TJ=25℃ PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) NUMBER OF CYCLES AT 60Hz 2