FM103

F M102-FM107 Surface Mount Rectifiers REVERSE VOLTAGE: 100 - 1000 V CURRENT: 1.0 A Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded construction High temperature soldering: 250 /10 seconds at terminals Case:JEDEC SOD-123FL,molded plastic over passivated chip Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single hase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS Device marking code FM 101 F1 FM 102 F2 FM 103 F3 FM 104 F4 FM 105 F5 FM 106 F6 FM 107 F7 UNITS Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forword rectified current @TA=75℃ I(AV) 1.0 A IFSM 20 A VF 1.15 V Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load Maximum instantaneous forward voltage @IFM=1.0A (Note 1) Maximum DC reverse current @TA=25℃ at rated DC blocking voltage @T A=125℃ Maximum reverse recovery time measured at f=1MH Z,VR=4.0V Typical thermal resistance junction to lead µA 50 Trr Typical junction capacitance 250 150 500 ns CJ 4 pF RθJL 20 ℃/W Tj - 55 --- + 150 ℃ TSTG - 55 --- + 150 ℃ Operating temperature range Storage temperature range 10 IR NOTE1.Pulse test: pulse width 300µsec,duty cycle 2%. ht t p : // Revision:20170701-P1 www.lgesemi .c o m mail:lge@lgesemi.com F M102-FM107 Surface Mount Rectifiers FIG.2 -- TYPICAL JUNCTION CAPACITANCE 100 10 T J =25 Pulse Width=300us CAPACITANCE, pF 4 2 AMPERES INSTANTANEOUS FORWARD CURRENT FIG.1 --TYPICAL FORWARD CHARACTERISTIC 1.0 0.4 0.2 0.1 0.06 0.04 0.02 0.01 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,V REVERSE VOLTAGE,VOLTS FIG.4 -- FORWARD DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES AMPERES INSTANTANEOUS REVERSE CURRENT FIG.3 -- TYPICAL INSTANTANEOUS REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE VOLTAGE,V PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG SOD-123FL 3000/REEL 90000 40X20X22 5.00 4.00 ht t p : // Revision:20170701-P1 AMBIENT TEMPERATURE, www.lgesemi .c o m mail:lge@lgesemi.com