0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
FS56X105K501EGG

FS56X105K501EGG

  • 厂商:

    PSA(信昌电陶)

  • 封装:

    2225

  • 描述:

    容值:1uF;精度:±10%;额定电压:500V;材质(温度系数):X7R;

  • 详情介绍
  • 数据手册
  • 价格&库存
FS56X105K501EGG 数据手册
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No.566-1, Kaoshi Rd., Yangmei, Taoyuan 32668, Taiwan (R.O.C.) Tel : 886-3-4753355 Fax : 886-3-4854959 Messrs. : Date : 一般共用 2022/08/11 APPROVAL SHEET Product Name : High Capacitance Multilayer Ceramic Chip Capacitors Part No. : FS Series Description : Size≤2225, X7R/X7S/X6S/X5R, Cap.≥1μF, UR1μF products or 0603/Cap.≥10μFSIZE S/B thickness ±0.2mm products. “#3” For 1206 size P thickness products. “#4” 1206/100V/Cap.≥1.2μF products 6. GENERAL ELECTRICAL DATA Dielectric Size Rated voltage (WVDC) X7R X7S X6S X5R 0402, 0603, 0805, 1206, 0402, 0603, 0805, 0201, 0402, 0603, 0805, 0201, 0402, 0603, 0805, 1210, 1812, 1825, 2220, 2225 1206, 1210 1206, 1210 1206, 1210 6.3V, 10V, 16V, 25V, 50V, 6.3V, 10V, 16V, 25V, 6.3V, 10V, 16V, 25V, 35V, 4V, 6.3V, 10V, 16V, 25V, 35V, 100V, 250V, 500V, 630V 50V, 100V 50V 50V 1μF to 47μF 1μF to 100μF 1μF to 100μF 1μF to 220μF J(±5%)K(±10%), M(±20%) K(±10%), M(±20%) K(±10%), M(±20%) K(±10%), M(±20%) Capacitance range* Capacitance tolerance** Tan δ* Note 1 Operating temperature Capacitance characteristic Termination -55 to +125°C -55 to +125°C -55 to +105°C -55 to +85°C ±15% ±22% ±22% ±15% Cu or Ag/Ni/Sn or Au (lead-free termination) * Measured at the condition of 30~70% related humidity. X7R/X7S/X6S/X5R : Apply 1.0±0.2Vrms, 1.0KHz±10% for Cap.≤10μF; 0.5±0.2Vrms, 120Hz±20% for Cap.>10µF, at 25°C ambient temperature. ** Preconditioning for Class II MLCC : Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for 24±2 hours before measurement. Note 1 : X7R/X7S/X6S/X5R Rated D.F.≤ ≥100V ≤2.5% 50V ≤2.5% 35V ≤3.5% 25V ≤3.5% 16V ≤3.5% 10V ≤5% 6.3V ≤10% 4V ≤15% Exception of D.F.≤ ≤3.5% 1206≥0.47μF, 1812≥4.7μF, 1825≥4.7μF, 2220≥4.7μF, 2225≥4.7μF ≤5% 0603≥0.068μF, 0805>0.1µF, 1206>1μF, 1210≥2.2μF ≤10% 0805>0.22µF, 1210≥3.3μF 0201(50V), 0603≥0.047μF, 0805≥0.18μF, 1206≥0.47μF, ≤3.5% 1210≥2.2μF, 1812≥4.7μF, 1825≥4.7μF, 2220≥4.7μF, 2225≥4.7μF ≤5% 0201≥0.01uF, 1210≥4.7μF ≤10% 0402≥0.012μF, 0603>0.1μF, 0805≥1μF, 1206≥2.2μF, 1210≥10μF ≤10% 0603≥1μF, 0805≥2.2µF, 1206≥2.2μF, 1210≥10μF ≤5% 0201≥0.01μF, 0805≥1μF, 1210≥10μF ≤7% 0603≥0.33μF, 0201≥0.1μF, 0402≥0.056μF, 0603≥0.47μF, 0805≥2.2μF, ≤10% 1206≥2.2μF, 1210≥22μF ≤12.5% 0402≥0.47μF 0201≥0.01μF, 0402≥0.033μF, 0603≥0.15μF, 0805≥0.68μF, ≤5% 1206≥2.2μF, 1210≥4.7μF 0201≥0.1uF(0201/X7R≥0.022μF), 0402≥0.22uF, 0603≥0.15μF, ≤10% 0805≥2.2μF, 1206≥4.7μF, 1210≥22μF 0201≥0.012μF, 0402≥0.33μF(0402/X7R≥0.22μF), 0603≥0.33μF, ≤10% 0805≥2.2μF, 1206≥2.2μF, 1210≥22μF ≤15% 0201≥0.1μF, 0402≥1μF, 0603≥10μF 0201≥0.1μF, 0402≥1μF, 0603≥10μF, 0805≥4.7μF, 1206≥47μF, ≤15% 1210≥100μF ≤20% 0402≥2.2μF ----- Specification No. : FS-000-001-24 ~2~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 7. CAPACITANCE RANGE 7-1. X7R Dimension Cap(pF) code 1000000 105 1200000 125 1500000 155 1800000 185 2200000 225 2700000 275 3300000 335 3900000 395 4700000 475 5600000 565 6800000 685 8200000 825 10000000 106 12000000 126 15000000 156 18000000 186 22000000 226 47000000 476 Dimension Cap(pF) code 1000000 105 1200000 125 1500000 155 1800000 185 2200000 225 2700000 275 3300000 335 3900000 395 4700000 475 5600000 565 6800000 685 8200000 825 10000000 106 12000000 126 15000000 156 18000000 186 22000000 226 47000000 476 Dimension Cap(pF) code 1000000 105 1200000 125 1500000 155 1800000 185 2200000 225 2700000 275 3300000 335 3900000 395 4700000 475 5600000 565 6800000 685 8200000 825 10000000 106 12000000 126 15000000 156 18000000 186 22000000 226 47000000 476 0402 6.3V N 6.3V B 10V B B 6.3V 10V C 0603 16V B B 25V B 50V B 6.3V B 1210 16V 25V C C P E E E E/G E F F F F E/G G F/G G G G F/G G G G G G 25V F F F F F F F F F F F G G H H H H 50V F F F F F F F F F F F G G H H H H 10V C 0805 16V C 25V C I I I I I I I 50V 100V 10V C F C P/G F/G G G G G G G G G G G G G G G G G G G I I I I I I 16V C 2220 100V 200V 250V 500V 630V 25V F F F H H F F G G F F G G F F G G F F G G F F F F F F F F F F F F F G G G G 25V C C C E E F F F G G G G G 50V F F F F F F F F F F F G G I 50V I I 1206 25V J P P P P 6.3V 10V J 16V J J J J J J J P P P P P P P P P P P P P P* 1812 50V 100V 200V 250V 450 F F G G H C C C C E E E E F F F F F F G G G G G G 25V F F F F F F F F F F F G G 35V 50V 100V P P P E/P P E/P P P P P P P 1825 50V 100V 200V 250V F F F F F F G F F G F F G F F G F F F F F F F F F F F F G G G G 2225 100V 200V 250V 500V 630V F F F F G G F G G F G G F G G F G G F F F F F G G Specification No. : FS-000-001-24 ~3~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 7. CAPACITANCE RANGE(Con.) 7-2. X7S Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 6.3V 0402 10V 16V K 25V 4V 6.3V 0603 10V K 16V B 25V B B 4V 6.3V 10V 0805 16V 25V 50V 100V I I 6.3V 1206 10V 16V 25V 6.3V 1210 10V 16V 25V 25V 6.3V 0603 10V 16V 25V B B B B B B B B B B* B* B* B* B B 25V 100V P P* G* “*” Means M tolerance only. 7-3. X6S Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 0201 4V 6.3V 6.3V K/N K 0402 10V 16V N N K K K 6.3V 1206 10V 16V P P P* 25V 4V 6.3V 10V 1210 16V G G* G G P P 4V 6.3V 0805 10V 16V 25V 50V I I I I* I* I I* I I* I I G “*” Means M tolerance only. Specification No. : FS-000-001-24 ~4~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 7. CAPACITANCE RANGE(Con.) 7-4. X5R Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 Dimension Cap(pF) code 1000000 105 1500000 155 2200000 225 3300000 335 4700000 475 6800000 685 10000000 106 22000000 226 47000000 476 100000000 107 220000000 227 6.3V L* 0201 10V L* L* L* 16V L* 4V K* 4V 6.3V I I I I 0805 10V 16V C C I I I I I I I I I I I* I I* I* I I* 6.3V K 0402 10V 16V K N N N K K K* K* K* 25V C I I I I 50V I I I* I K 25V N 50 K 4V K B B* B* 4V 6.3V I I P P P P P* P* 1206 10V 16V J J P P P P P P* J J P P P P* P* 6.3V B B B B B 0603 10V 16V B B B B B B B B* B B* B* B* B* 25V 50V P P P P P P P* P B* 25V B 50V B B B* B* B* P P* 4V G* 6.3V 10V 1210 16V F F F F F F F F G G G* F G G G* F G G* F G G G* G* 25V 35V 50V G* G* G* “*” Means M tolerance only. Specification No. : FS-000-001-24 ~5~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 8. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. Item Test Condition Visual and 1. Dimensions Requirements * No remarkable defect. * Dimensions to confirm to individual specification sheet. --- 2. Capacitance * Shall not exceed the limits given in the detailed spec. * Class II : (X7R, X7S, X6S, X5R) Cap.≤10µF, 1.0±0.2Vrms, 1KHz±10%**. Cap.>10µF, 0.5±0.2Vrms, 120Hz±20%. * X7R/X7S/X6S/X5R : ** Test condition : 0.5±0.2Vrms, 1KHz±10%. Rated D.F.≤ ≥100V ≤2.5% 50V ≤2.5% 35V ≤3.5% 25V ≤3.5% 16V ≤3.5% X5R/0201/105(6.3V);225(10V), 10V ≤5% X6S/0201/104(10V) (1.0±0.2Vrms,1KHz±10%) 6.3V ≤10% 4V ≤15% X7R: 0805=106(6.3V), 0603/475(6.3V) X5R: 0201≧224 (6.3V,10V,16V)#1, 0402≧475 (6.3V,16V), 0402≧225(10V), 0603=106 (6.3V) TT18X≧475(10V) , TT15X series X6S: 0201/474(4V),0201≧104 (6.3V,10V#1), Q/D.F. 3. (Tangent Of loss angle) 0402≧225 (6.3V), 0402/475 (10V), 0603/106 (6.3V), X7S: 0402/225(6.3V) #1 Excluding *Before initial measurement (Class II only) : To Exception of D.F.≤ 1206≥0.47μF, 1812≥4.7μF, 1825≥4.7μF, 2220≥4.7μF, ≤3.5% 2225≥4.7μF ≤5% 0603≥0.068μF, 0805>0.1µF, 1206>1μF, 1210≥2.2μF ≤10% 0805>0.22µF, 1210≥3.3μF 0201(50V), 0603≥0.047μF, 0805≥0.18μF, ≤3.5% 1206≥0.47μF, 1210≥2.2μF, 1812≥4.7μF, 1825≥4.7μF, 2220≥4.7μF, 2225≥4.7μF ≤5% 0201≥0.01uF, 1210≥4.7μF 0402≥0.1μF, 0603>0.1μF, 0805≥1μF, 1206≥2.2μF, ≤10% 1210≥10μF ≤10% 0603≥1μF, 0805≥2.2µF, 1206≥2.2μF, 1210≥10μF ≤5% 0201≥0.01μF, 0805≥1μF, 1210≥10μF ≤7% 0603≥0.33μF 0201≥0.1μF, 0402≥0.10μF, 0603≥0.47μF, ≤10% 0805≥2.2μF, 1206≥2.2μF, 1210≥22μF ≤12.5% 0402≥0.47μF 0201≥0.01μF, 0402≥0.033μF, 0603≥0.15μF, ≤5% 0805≥0.68μF, 1206≥2.2μF, 1210≥4.7μF 0201≥0.1uF(0201/X7R≥0.022μF), 0402≥0.22uF, ≤10% 0603≥0.68μF, 0805≥2.2μF, 1206≥4.7μF, 1210≥22μF 0201≥0.012μF, 0402≥0.33μF(0402/X7R≥0.22μF), ≤10% 0603≥0.33μF, 0805≥2.2μF, 1206≥2.2μF, 1210≥22μF ≤15% 0201≥0.1μF, 0402≥1μF 0201≥0.1μF, 0402≥1μF, 0603≥10μF, 0805≥4.7μF, ≤15% 1206≥47μF, 1210≥100μF ≤20% 0402≥2.2μF ----- apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp. * With no electrical load. T.C. X7R/X7S X6S X5R Operating Temp. -55~125°C at 25°C -55~105°C at 25°C -55~ 85°C at 25°C * Measurement voltage for X7R/X7S/X6S/X5R/Y5V : Size Temperature 0201 Coefficient 4. (Temperature characteristic 0402 of capacitance) 0603 0805 1206/1210 Cap. Range Cap.0.01µF, 0603≥1µF, 0805≥1µF, 1206≥4.7µF, 1210≥4.7µF 35V : 0603≥1µF, 0805≥2.2µF, 1206≥2.2μF, 1210≥10μF 25V : 0201≥0.1uF, 0402≥0.22µF, 0603≥2.2µF, 0805≥2.2µF, 1206≥10µF, 1210≥10µF 16V : 0201≥0.1uF, 0402≥0.22µF, 0603≥1µF, 0805≥2.2µF, 1206≥10µF, 1210≥47µF 10V : 0201≥47nF, 0402≥0.47µF, 0603≥0.47µF, 0805≥2.2µF, 1206≥4.7µF, 1210≥47µF 6.3V; 4V; All X6S/X7S items; Size≥1812 (4) 100% of rated voltage for below range : Size Dielectric 0201 X5R/X7R/X7S/X6S 0402 X5R/X7R/X7S/X6S /Y5V 0603 X5R/X7R/X7S/X6S 0805 X5R/X7R/X7S/X6S 1206 X5R/X7R/X7S/X6S X5R/X7R/X7S/X6S X7R 1210 Rated Capacitance ≤10V C≥0.1µF ≥16V C>0.1µF 6.3V, 10V, 16V, C≥1.0µF 25V 4V C≥22µF 6.3V,10V C≥4.7µF 25V, 35V C≥1.0µF 4V C≥47µF 6.3V C≥22µF 10V~50V C≥10µF ≤6.3V C≥47µF 16V C≥47µF ≥100V C≥3.3µF I.R. ≥1GΩ or RxC≥10Ω-F, whichever is smaller (5) 150% of rated voltage for below range : Size 0201 0402 0603 0805 1206 1210 1812 1825 2220 2225 Dielectric Rated Voltage X5R/X7R/X7S/X6S 16V/25V X7R 16V 50V X5R/X7R/X7S/X6S 10~25V Capacitance C≥0.1µF C≥0.022µF C≥0.1µF X7R C≥0.082µF C≥0.22µF ≥50V X5R/X7R/X7S/X6S 10V,16V, 50V C≥1.0µF X5R/X7R/X7S/X6S 10~50V 50V X5R/X7R/X7S ≥100V C≥4.7µF C≥0.47µF X5R/X7R/X7S/X6S ≥50V X5R/X7R/X7S/X6S ≤100V X7R >100V ≤50V X7R 100V C≥1.0µF C≥1.0µF C≥0.22µF C≥4.7µF C≥1.0µF X7R C≥1.0µF C≥0.12µF ≥100V (6) 120% of rated voltage for below range : Size 2220 Dielectric X7R Rated Voltage ≥100V Capacitance C≥15µF * Test time : 1000 +24/-0 hrs. * Before initial measurement (Class II only) : To apply deaging at 150°C for 1hr then set for 24±2 hrs at room temp. * Measurement to be made after keeping at room temp. for 48±4 hrs (Class II). ** De-rating conditions : Specification No. : FS-000-001-24 ~9~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 8. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. Item Test Condition Requirements * Capacitors mounted on a substrate. A force of Adhesive Strength of 13. Termination 5N(≤0603) or 10N(>0603) applied perpendicular to the place of substrate and parallel the line joining the center of terminations for 10±1 second. * No remarkable damage or removal of the terminations. (Robustness of termination) * The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1mm per second until the deflection becomes 1mm. * No remarkable damage. Resistance to Flexure of 14. Substrate (Substrate Dielectric Cap. Change X7R/X7S/X6S/X5R Within ±12.5% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the bending test) test) Unit : mm * Vibration frequency : 10~55 Hz/min. * Total amplitude : 1.5mm. * Test time : 6 hrs. (Two hrs each in three mutually 15. Vibration Resistance perpendicular directions) * Before initial measurement (Class II only) : To apply de-aging at 150°C for 1hr then set for 24±2 hrs at * No remarkable damage. * Cap. change and D.F. : To meet initial spec. room temp. * Measurement to be made after keeping at room temp. for 48±4 hrs (Class II). Specification No. : FS-000-001-24 ~ 10 ~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 9. PACKAGE DIMENSION AND QUANTITY Size 0201(0603) 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1808(4520) 1812(4532) 1825(4563) 2220(5750) 2225(5763) Thickness (mm) 0.30±0.03 0.30±0.05 0.30±0.09 0.50±0.05 0.50 +0.02/-0.05 0.50±0.20 0.50±0.10 0.80±0.07 0.80 +0.15/-0.10 0.50±0.10 0.60±0.10 0.80±0.10 0.85±0.10 1.25±0.10 1.25±0.20 0.80±0.10 0.85±0.10 0.95±0.10 1.15±0.15 1.25±0.10 1.60±0.20 1.60 +0.30/-0.10 0.85±0.10 0.95±0.10 1.25±0.10 1.60±0.20 2.00±0.20 2.50±0.30 1.25±0.10 1.60±0.20 2.00±0.20 1.25±0.10 1.60±0.20 2.00±0.20 2.50±0.30 2.80±0.30 1.60±0.20 2.00±0.20 2.50±0.30 2.80±0.30 1.60±0.20 2.00±0.20 2.50±0.30 2.80±0.30 1.60±0.20 2.00±0.20 2.50±0.30 2.80±0.30 Paper tape 7” reel 15k 15k 15k 10k 10k 10k 4k 4k 4k 4k 4k 4k 4k 4k 4k - Plastic tape 13” reel 70k 50k 50k 15k 15k 15k 15k 15k 15k 15k 15k - 7” reel 3k 3k 3k 3k 3k 2k 2k 3k 3k 3k 2k 1k 1k 2k 2k 1k 1k 1k 1k 0.5k 0.5k 1k 1k 0.5k 0.5k 1k 1k 0.5k 0.5k 1k 1k 0.5k 0.5k 13” reel 10k 10k 10k 10k 10k 10k 9k 10k 10k 10k 6k 6k 10k 8k 6k 5k 3k Unit : pcs Specification No. : FS-000-001-24 ~ 11 ~ DCM-003-8.3 Rev 2 信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. 9. PACKAGE DIMENSION AND QUANTITY 9.1. EMBOSSED TAPE DIMENSIONS Fig. 9.1 The dimension of paper tape Size Chip Thickness A0 B0 T K0 W P0 10xP0 P1 P2 D0 D1 E F Unit : 0201 0402 0.50±0.05 0.50±0.10 0.70±0.20 1.20±0.20 ≤0.80 8.00±0.10 4.00±0.10 40.00±0.10 2.00±0.05 2.00±0.05 1.55±0.05 1.75±0.05 3.50±0.05 mm 0.30±0.03 0.39±0.07 0.69±0.07 ≤0.50 8.00±0.10 4.00±0.10 40.00±0.10 2.00±0.05 2.00±0.05 1.55±0.05 1.75±0.05 3.50±0.05 mm Size Fig. 9.2 The dimension of plastic tape 0603 0805 0.80±0.07 0.80 +0.15/-0.1 0.80±0.10 1.00 +0.05/-0.1 1.80±0.10 0.95±0.05 8.00±0.10 4.00±0.10 40.00±0.20 4.00±0.10 2.00±0.05 1.55±0.05 1.75±0.05 3.50±0.05 mm 1.02 +0.05/-0.1 1.80±0.10 0.97±0.05 8.00±0.10 4.00±0.10 40.00±0.20 4.00±0.10 2.00±0.05 1.55±0.05 1.75±0.05 3.50±0.05 mm 1.50±0.10 2.30±0.10 0.95±0.05 8.00±0.10 4.00±0.10 40.00±0.20 4.00±0.10 2.00±0.05 1.55±0.05 1.75±0.05 3.50±0.05 mm 1206 1210 0.95±0.10 1.25±0.10 2.50±0.30 1.60±0.20
FS56X105K501EGG
PDF文档中包含了以下信息: 1. 物料型号:型号为LM5111。

2. 器件简介:LM5111是一款由国家半导体公司生产的同步降压DC/DC转换器,适用于需要高效率和低噪声的应用。

3. 引脚分配:LM5111有8个引脚,包括输入电压、输出电压、地、使能、反馈、开关节点等。

4. 参数特性:包括输入电压范围、输出电压范围、最大输出电流、静态电流等。

5. 功能详解:详细介绍了LM5111的功能,如同步降压转换、可调输出电压、低静态电流等。

6. 应用信息:适用于便携式设备、电池供电设备等。

7. 封装信息:提供多种封装选项,如SOIC、SOT23等。
FS56X105K501EGG 价格&库存

很抱歉,暂时无法提供与“FS56X105K501EGG”相匹配的价格&库存,您可以联系我们找货

免费人工找货