PRODUCT FAMILY DATA SHEET
XLamp® XM-L2 LEDs
PRODUCT DESCRIPTION
FEATURES
The XLamp® XM-L2 LED builds on the unprecedented performance
• Available in white, 70‑CRI white, 80‑CRI white, and 90‑CRI
of the original XM-L, increasing lumen output up to 20% while
white
providing a single die LED point source for precise optical control.
• ANSI‑compatible chromaticity bins
The XM-L2 LED shares the same mechanical and optical footprint
• Binned at 85 °C
as the original XM-L, providing a seamless upgrade path and
• Maximum drive current: 3000 mA
shortened design cycle.
• Low thermal resistance: 0.75 °C/W
• Wide viewing angle: 120°
XLamp XM-L2 LEDs are the ideal choice for lighting applications
• Unlimited floor life at ≤ 30 ºC/85% RH
where high light output and maximum efficacy are required, such
• Reflow solderable - JEDEC J‑STD‑020C
as LED light bulbs, outdoor lighting, portable lighting, indoor
• Electrically neutral thermal path
lighting and solar-powered lighting.
• RoHS and REACH compliant
• UL® recognized component (E349212)
Cree LED / 4001 E. Hwy. 54, Suite 2000 / Durham, NC 27709 USA / +1.919.313.5330 / www.cree-led.com
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
1
XLAMP ® XM-L2 LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Order Codes Suggested for New Designs............................................................................................................................................................. 4
Relative Spectral Power Distribution................................................................................................................................................................... 11
Relative Flux vs. Junction Temperature............................................................................................................................................................... 11
Electrical Characteristics...................................................................................................................................................................................... 12
Relative Flux vs. Current....................................................................................................................................................................................... 12
Relative Chromaticity vs. Current......................................................................................................................................................................... 13
Relative Chromaticity vs. Temperaturee.............................................................................................................................................................. 13
Typical Spatial Distribution................................................................................................................................................................................... 14
Thermal Design..................................................................................................................................................................................................... 14
Performance Groups – Luminous Flux............................................................................................................................................................... 15
Performance Groups – Chromaticity................................................................................................................................................................... 15
Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions..................................................................................................... 19
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 20
Standard Chromaticity Kits.................................................................................................................................................................................. 22
Bin and Order Code Formats................................................................................................................................................................................ 23
Reflow Soldering Characteristics......................................................................................................................................................................... 24
Notes..................................................................................................................................................................................................................... 25
Mechanical Dimensions....................................................................................................................................................................................... 27
Tape and Reel........................................................................................................................................................................................................ 28
Packaging.............................................................................................................................................................................................................. 30
Appendix - Order Codes Not For New Designs................................................................................................................................................... 31
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
2
XLAMP ® XM-L2 LED
CHARACTERISTICS
Characteristics
Unit
Thermal resistance, junction to solder point*
°C/W
0.75
degrees
120
mV/°C
-1.3
Viewing angle (FWHM)
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
3000
Reverse voltage
V
1
Forward voltage (@ 700 mA, 85 °C)
V
2.72
Forward voltage (@ 1500 mA, 85 °C)
V
2.84
Forward voltage (@ 3000 mA, 85 °C)
V
3.02
LED junction temperature
°C
DC forward current
3.15
150
Note
*
Thermal resistance measurement was performed per JEDEC JESD51-14 standard. See the Thermal Resistance Measurement
application note for more details.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
3
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C)
The following tables provide order codes for XLamp XM-L2 LEDs. For a complete description of the order-code nomenclature, please
consult the Bin and Order Code Formats section (page 23).
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
65 CRI Typical
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
6200 K
6000 K
6200 K
6500 K
5700 K
U4
340
370
469
667
848
XMLBWT-00-0000-0000U4051
U3
320
348
441
628
798
XMLBWT-00-0000-0000U3051
U2
300
327
414
589
749
XMLBWT-00-0000-0000U2051
T6
280
305
386
549
699
XMLBWT-00-0000-0000T6051
U4
340
370
469
667
848
XMLBWT-00-0000-0000U4053
U3
320
348
441
628
798
XMLBWT-00-0000-0000U3053
U2
300
327
414
589
749
XMLBWT-00-0000-0000U2053
T6
280
305
386
549
699
XMLBWT-00-0000-0000T6053
U4
340
370
469
667
848
XMLBWT-00-0000-0000U4050
U3
320
348
441
628
798
XMLBWT-00-0000-0000U3050
U2
300
327
414
589
749
XMLBWT-00-0000-0000U2050
T6
280
305
386
549
699
XMLBWT-00-0000-0000T6050
U4
340
370
469
667
848
XMLBWT-00-0000-0000U40E1
U3
320
348
441
628
798
XMLBWT-00-0000-0000U30E1
U2
300
327
414
589
749
XMLBWT-00-0000-0000U20E1
T6
280
305
386
549
699
XMLBWT-00-0000-0000T60E1
U4
340
370
469
667
848
XMLBWT-00-0000-0000U40E2
U3
320
348
441
628
798
XMLBWT-00-0000-0000U30E2
U2
300
327
414
589
749
XMLBWT-00-0000-0000U20E2
T6
280
305
386
549
699
XMLBWT-00-0000-0000T60E2
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
4
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
70 CRI Minimum
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
E4
F5
E5
5000 K
U4
340
370
469
667
848
XMLBWT-00-0000000BU40E3
XMLBWT-00-0000000LU40E3
U3
320
348
441
628
798
XMLBWT-00-0000000BU30E3
XMLBWT-00-0000000LU30E3
U2
300
327
414
589
749
XMLBWT-00-0000000BU20E3
XMLBWT-00-0000000LU20E3
U4
340
370
469
667
848
XMLBWT-00-0000000BU40F4
U3
320
348
441
628
798
XMLBWT-00-0000000BU30F4
XMLBWT-00-0000000LU30F4
U2
300
327
414
589
749
XMLBWT-00-0000000BU20F4
XMLBWT-00-0000000LU20F4
T6
280
305
386
549
699
U4
340
370
469
667
848
XMLBWT-00-0000000BU40E4
U3
320
348
441
628
798
XMLBWT-00-0000000BU30E4
XMLBWT-00-0000000LU30E4
U2
300
327
414
589
749
XMLBWT-00-0000000BU20E4
XMLBWT-00-0000000LU20E4
T6
280
305
386
549
699
U4
340
370
469
667
848
XMLBWT-00-0000000BU40F5
U3
320
348
441
628
798
XMLBWT-00-0000000BU30F5
XMLBWT-00-0000000LU30F5
U2
300
327
414
589
749
XMLBWT-00-0000000BU20F5
XMLBWT-00-0000000LU20F5
T6
280
305
386
549
699
U4
340
370
469
667
848
XMLBWT-00-0000000BU40E5
U3
320
348
441
628
798
XMLBWT-00-0000000BU30E5
XMLBWT-00-0000000LU30E5
XMLBWT-00-0000000HU30E5
U2
300
327
414
589
749
XMLBWT-00-0000000BU20E5
XMLBWT-00-0000000LU20E5
XMLBWT-00-0000000HU20E5
T6
280
305
386
549
699
XMLBWT-00-0000000LT60E5
XMLBWT-00-0000000HT60E5
4750 K
4500 K
4250 K
4000 K
XMLBWT-00-0000000LT60F4
XMLBWT-00-0000000LT60E4
XMLBWT-00-0000000LT60F5
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
5
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
70 CRI Minimum
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
Z5
4000 K
U3
320
348
441
628
798
XMLBWT-00-0000000LU30Z5
XMLBWT-00-0000000HU30Z5
U2
300
327
414
589
749
XMLBWT-00-0000000LU20Z5
XMLBWT-00-0000000HU20Z5
T6
280
305
386
549
699
XMLBWT-00-0000000LT60Z5
XMLBWT-00-0000000HT60Z5
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
6
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
80 CRI Typical
80 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F6
E6
Z6
F7
3750 K
3500 K
3500 K
3250 K
U2
300
327
414
589
749
XMLBWT-00-0000000LU20F6
XMLBWT-00-0000000HU20F6
T6
280
305
386
549
699
XMLBWT-00-0000000LT60F6
XMLBWT-00-0000000HT60F6
T5
260
283
359
510
649
XMLBWT-00-0000000LT50F6
XMLBWT-00-0000000HT50F6
U2
300
327
414
589
749
XMLBWT-00-0000000LU20E6
XMLBWT-00-0000000HU20E6
T6
280
305
386
549
699
XMLBWT-00-0000000LT60E6
XMLBWT-00-0000000HT60E6
T5
260
283
359
510
649
XMLBWT-00-0000000LT50E6
XMLBWT-00-0000000HT50E6
U2
300
327
414
589
749
XMLBWT-00-0000000LU20Z6
XMLBWT-00-0000000HU20Z6
T6
280
305
386
549
699
XMLBWT-00-0000000LT60Z6
XMLBWT-00-0000000HT60Z6
T5
260
283
359
510
649
XMLBWT-00-0000000LT50Z6
XMLBWT-00-0000000HT50Z6
U2
300
327
414
589
749
XMLBWT-00-0000000LU20F7
XMLBWT-00-0000000HU20F7
T6
280
305
386
549
699
XMLBWT-00-0000000LT60F7
XMLBWT-00-0000000HT60F7
T5
260
283
359
510
649
XMLBWT-00-0000000LT50F7
XMLBWT-00-0000000HT50F7
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
7
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
80 CRI Typical
80 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E7
Z7
3000 K
3000 K
U2
300
327
414
589
749
XMLBWT-00-0000000LU20E7
XMLBWT-00-0000000HU20E7
T6
280
305
386
549
699
XMLBWT-00-0000000LT60E7
XMLBWT-00-0000000HT60E7
T5
260
283
359
510
649
XMLBWT-00-0000000LT50E7
XMLBWT-00-0000000HT50E7
T4
240
261
331
471
599
T3
220
239
303
432
549
T2
200
218
276
392
499
XMLBWT-00-0000000UT20E7
S6
182
198
251
357
454
XMLBWT-00-0000000US60E7
S5
172
187
237
337
429
XMLBWT-00-0000000US50E7
S4
164
179
226
322
409
XMLBWT-00-0000000US40E7
U2
300
327
414
589
749
XMLBWT-00-0000000LU20Z7
XMLBWT-00-0000000HU20Z7
T6
280
305
386
549
699
XMLBWT-00-0000000LT60Z7
XMLBWT-00-0000000HT60Z7
T5
260
283
359
510
649
XMLBWT-00-0000000LT50Z7
XMLBWT-00-0000000HT50Z7
T4
240
261
331
471
599
T3
220
239
303
432
549
T2
200
218
276
392
499
S6
182
198
251
357
454
XMLBWT-00-0000000US60Z7
S5
172
187
237
337
429
XMLBWT-00-0000000US50Z7
S4
164
179
226
322
409
XMLBWT-00-0000000US40Z7
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
8
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
80 CRI Typical
80 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F8
E8
2850 K
2700 K
T6
280
305
386
549
699
XMLBWT-00-0000000LT60F8
XMLBWT-00-0000000HT60F8
T5
260
283
359
510
649
XMLBWT-00-0000000LT50F8
XMLBWT-00-0000000HT50F8
T4
240
261
331
471
599
XMLBWT-00-0000000LT40F8
XMLBWT-00-0000000HT40F8
T3
220
239
303
432
549
T2
200
218
276
392
499
S6
182
198
251
357
454
XMLBWT-00-0000000US60F8
S5
172
187
237
337
429
XMLBWT-00-0000000US50F8
S4
164
179
226
322
409
XMLBWT-00-0000000US40F8
S3
156
170
215
306
389
XMLBWT-00-0000000US30F8
T6
280
305
386
549
699
XMLBWT-00-0000000LT60E8
XMLBWT-00-0000000HT60E8
T5
260
283
359
510
649
XMLBWT-00-0000000LT50E8
XMLBWT-00-0000000HT50E8
T4
240
261
331
471
599
XMLBWT-00-0000000LT40E8
XMLBWT-00-0000000HT40E8
T3
220
239
303
432
549
T2
200
218
276
392
499
S6
182
198
251
357
454
XMLBWT-00-0000000US60E8
S5
172
187
237
337
429
XMLBWT-00-0000000US50E8
S4
164
179
226
322
409
XMLBWT-00-0000000US40E8
S3
156
170
215
306
389
XMLBWT-00-0000000US30E8
Notes
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 31.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
• XLamp XM-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values are for reference only.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
9
XLAMP ® XM-L2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS (TJ = 85 °C) - CONTINUED
Chromaticity
Minimum Luminous Flux (lm) @
700 mA*
Kit
Code
CCT
Flux (lm) @ Flux (lm) @
85 °C
25 °C*
Calculated Minimum Luminous Flux
(lm) @ 85 °C**
1000 mA
1500 mA
2000 mA
Order Codes
80 CRI Typical
80 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
Z8
2700 K
T6
280
305
386
549
699
XMLBWT-00-0000000LT60Z8
XMLBWT-00-0000000HT60Z8
T5
260
283
359
510
649
XMLBWT-00-0000000LT50Z8
XMLBWT-00-0000000HT50Z8
T4
240
261
331
471
599
XMLBWT-00-0000000LT40Z8
XMLBWT-00-0000000HT40Z8
T3
220
239
303
432
549
T2
200
218
276
392
499
S6
182
198
251
357
454
S5
172
187
237
337
429
XMLBWT-00-0000000US50Z8
S4
164
179
226
322
409
XMLBWT-00-0000000US40Z8
S3
156
170
215
306
389
XMLBWT-00-0000000US30Z8
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
10
XLAMP ® XM-L2 LED
Relative Spectral Power
RELATIVE SPECTRAL POWER DISTRIBUTION
100%
Relative Radiant Power
80%
60%
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 700 MA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
11
11
XLAMP ® XM-L2 LED
Electrical Characteristics (Tj = 85°C)
ELECTRICAL CHARACTERISTICS (TJ = 85 °C)
after Vf change
3000
2800
2600
Forward Current (mA)
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
2.55
2.65
Relative Intensity vs. Current
(Tj 2.75
= 85°C)
2.85
2.95
3.05
Forward Voltage (V)
RELATIVE FLUX VS. CURRENT (TJ = 85 °C)
350%
Relative Luminous Flux
300%
250%
200%
150%
100%
50%
0%
0
200
400
600
800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA)
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
12
XLAMP ® XM-L2 LED
Relative Chromaticity Vs. Current, WW
RELATIVE CHROMATICITY VS. CURRENT (WARM WHITE)
0.020
0.016
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Relative Chromaticity Vs. Temperature WW
RELATIVE CHROMATICITY VS. TEMPERATURE (WARM WHITE)
0.020
0.016
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25
50
75
100
125
150
Tsp (°C)
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
13
XLAMP ® XM-L2 LED
Typical Spatial Radiation Pattern
TYPICAL SPATIAL DISTRIBUTION
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
THERMAL DESIGN
The maximum
forward current is determined by the thermal
resistance
between the LED junction and ambient. It is crucial for the end
Thermal
Design
after temp
coeff change
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
3500
Maximum Current (mA)
3000
2500
2000
1500
Rj-a = 4°C/W
1000
Rj-a = 7°C/W
Rj-a = 10°C/W
500
Rj-a = 15°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
14
XLAMP ® XM-L2 LED
PERFORMANCE GROUPS – LUMINOUS FLUX
XLamp XM-L2 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:
Group Code
Minimum Luminous
Flux
@ 700 mA (lm)
Maximum Luminous
Flux
@ 700 mA (lm)
S3
156
164
S4
164
172
S5
172
182
S6
182
200
T2
200
220
T3
220
240
T4
240
260
T5
260
280
T6
280
300
U2
300
320
U3
320
340
U4
340
360
U5
360
380
PERFORMANCE GROUPS – CHROMATICITY
Region
0A
0R
1A
1R
x
y
0.2950
0.2920
0.2984
0.3133
0.3009
0.3042
0.2980
0.2880
0.2950
0.2970
0.3009
0.3042
0.3037
0.3048
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3068
0.3144
0.3161
0.3059
0.3093
0.2993
Region
x
y
0.2970
0.2920
0.3060
0.2895
0.2962
0.3220
0.2984
0.3133
0.2895
0.3135
0.2870
0.3210
0.2937
0.3312
0.2937
0.2962
0.3207
0.3028
0.3115
0.3391
0.3130
0.3290
0.3048
0.3207
0.3113
0.3005
0.3186
0.3099
0.3115
0.3391
0.3028
0.3304
0B
0S
1B
1S
Region
x
y
0.3060
0.2984
0.3135
0.2962
0.3028
0.3304
0.3048
0.3207
0.2962
0.3220
0.2937
0.3312
0.3005
0.3415
0.3220
0.3028
0.3304
0.3115
0.3205
0.3481
0.3213
0.3373
0.3130
0.3290
0.3415
0.3099
0.3509
0.3196
0.3205
0.3481
0.3115
0.3391
0C
0T
1C
1T
x
y
0.3133
0.2984
0.3133
0.3220
0.3048
0.3207
0.3068
0.3113
0.3009
0.3042
0.3037
0.2937
0.3009
0.3042
0.3068
0.3113
0.3304
0.3093
0.2993
0.3391
0.3130
0.3290
0.3213
0.3373
0.3221
0.3261
0.3144
0.3186
0.3509
0.3144
0.3186
0.3602
0.3221
0.3261
0.3231
0.3120
0.3161
0.3059
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
Region
0D
0U
1D
1U
CLD-DS61
REV 14
15
XLAMP ® XM-L2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region
2A
2R
3A
3R
4A
4R
5A1
5B1
5C1
5D1
x
y
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3222
0.3290
0.3290
0.3180
0.3231
0.3371
0.3451
0.3554
0.3440
0.3427
0.3366
0.3369
0.3366
0.3440
0.3429
0.3307
0.3361
0.3245
0.3530
0.3597
0.3615
0.3659
0.3590
0.3521
0.3512
0.3512
0.3590
0.3521
0.3567
0.3389
0.3495
0.3339
0.3670
0.3686
0.3744
0.3685
0.3726
0.3612
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3825
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3783
0.3804
0.3863
0.3758
0.3840
0.3681
Region
x
y
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3215
0.3350
0.3243
0.3196
0.3300
0.3290
0.3290
0.3538
0.3120
0.3207
0.3490
0.3376
0.3463
0.3687
0.3451
0.3554
0.3371
0.3490
0.3369
0.3381
0.3428
0.3480
0.3463
0.3687
0.3376
0.3616
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3465
0.3530
0.3465
0.3571
0.3668
0.3957
0.3641
0.3804
0.3548
0.3736
0.3578
0.3686
0.3649
0.3702
0.3763
0.3760
0.3744
0.3685
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3760
0.3782
0.3798
0.3847
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3646
0.3804
0.3721
0.3825
0.3887
0.3836
0.3863
0.3758
2B
2S
3B
3S
4B
4S
5A2
5B2
5C2
5D2
Region
x
y
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3417
0.3602
0.3290
0.3690
0.3381
0.3376
0.3616
0.3462
0.3290
0.3616
0.3463
0.3551
0.3760
0.3533
0.3620
0.3451
0.3762
0.3840
0.3551
0.3760
0.3463
0.3687
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3597
0.3615
0.3907
0.3668
0.3771
0.4034
0.3736
0.3874
0.3641
0.3804
0.3649
0.3744
0.3722
0.3763
0.3825
0.3798
0.3804
0.3721
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3837
0.3847
0.3877
0.3912
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3721
0.3863
0.3798
0.3887
0.3950
0.3875
0.3924
0.3794
2C
2T
3C
3T
4C
4T
5A3
5B3
5C3
5D3
x
y
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3290
0.3300
0.3690
0.3290
0.3300
0.3762
0.3366
0.3369
0.3361
0.3245
0.3538
0.3290
0.3180
0.3687
0.3451
0.3554
0.3533
0.3620
0.3515
0.3487
0.3554
0.3440
0.3427
0.3480
0.3840
0.3440
0.3428
0.3571
0.3907
0.3515
0.3487
0.3495
0.3339
0.3429
0.3307
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3659
0.3590
0.3521
0.3957
0.3590
0.3521
0.3670
0.3578
0.3640
0.3440
0.3567
0.3389
0.3685
0.3726
0.3612
0.3760
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3877
0.3825
0.3798
0.3917
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3758
0.3840
0.3681
0.3836
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
Region
2D
2U
3D
3U
4D
4U
5A4
5B4
5C4
5D4
CLD-DS61
REV 14
16
XLAMP ® XM-L2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region
6A1
6B1
6C1
6D1
7A1
7B1
7C1
7D1
8A1
8B1
x
y
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.3953
0.3720
0.3941
0.3968
0.4040
0.3966
0.4010
0.4080
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4017
0.4048
0.4116
0.3865
0.4082
0.3782
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
0.4203
0.4221
0.4259
0.4073
0.4322
0.4096
0.4281
0.4006
0.4342
0.4385
0.4449
0.4141
0.4403
0.4049
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.4373
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4465
0.4513
0.4573
0.4178
0.4523
0.4085
Region
x
y
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3848
0.3968
0.3930
0.3996
0.4071
0.4052
0.3882
0.4040
0.3916
0.4113
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.3751
0.4048
0.3832
0.4080
0.4150
0.3950
0.4116
0.3865
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
0.3833
0.4242
0.3984
0.4259
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4028
0.4385
0.4119
0.4430
0.4496
0.4236
0.4449
0.4141
0.4300
0.3939
0.4342
0.4028
0.4403
0.4049
0.3873
0.4359
0.3893
0.4418
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4071
0.4513
0.4164
0.4562
0.4624
0.4274
0.4573
0.4178
6A2
6B2
6C2
6D2
7A2
7B2
7C2
7D2
8A2
8B2
Region
x
y
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3930
0.4040
0.4015
0.4071
0.4146
0.4089
0.3966
0.4113
0.4001
0.4186
0.4222
0.4127
0.4299
0.4165
0.4259
0.3832
0.3916
0.4221
0.3984
0.4183
0.3898
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
0.3919
0.4300
0.3939
0.4259
0.353
0.4073
0.4322
0.4096
0.4281
0.4006
0.4364
0.4188
0.4322
0.4096
0.4430
0.4212
0.4385
0.4119
0.4385
0.4119
0.4342
0.4028
0.4119
0.4449
0.4141
0.4403
0.4049
0.4212
0.4496
0.4236
0.4449
0.4141
0.4562
0.4260
0.4513
0.4164
0.4513
0.4164
0.4465
0.4071
0.4359
0.3960
0.4316
0.3873
0.4403
0.4049
0.4359
0.3960
0.4465
0.4071
0.4418
0.3981
0.3960
0.4418
0.3981
0.4373
0.3893
0.3981
0.4475
0.3994
0.4428
0.3906
0.4523
0.4085
0.4475
0.3994
0.4582
0.4099
0.4532
0.4008
0.4532
0.4008
0.4483
0.3919
0.4164
0.4573
0.4178
0.4523
0.4085
0.4260
0.4624
0.4274
0.4573
0.4178
0.4687
0.4289
0.4634
0.4193
0.4634
0.4193
0.4582
0.4099
6A3
6B3
6C3
6D3
7A3
7B3
7C3
7D3
8A3
8B3
x
y
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3966
0.4010
0.3882
0.4052
0.4040
0.3966
0.4113
0.4001
0.4001
0.4080
0.3916
0.4037
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4073
0.4221
0.3984
0.4116
0.3865
0.4082
0.3782
0.4150
0.3950
0.4116
0.3865
0.4183
0.3898
0.4147
0.3814
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
Region
6A4
6B4
6C4
6D4
7A4
7B4
7C4
7D4
8A4
8B4
CLD-DS61
REV 14
17
XLAMP ® XM-L2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region
8C1
8D1
x
y
0.4582
0.4099
0.4634
0.4193
0.4695
0.4207
0.4641
0.4112
0.4483
0.4532
0.4589
0.4021
0.4538
0.3931
Region
x
y
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4695
0.4207
0.3919
0.4532
0.4008
0.4582
0.4641
0.4112
0.4589
0.4021
8C2
8D2
Region
x
y
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4756
0.4221
0.4008
0.4589
0.4099
0.4641
0.4700
0.4126
0.4646
0.4034
8C3
8D3
x
y
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4700
0.4126
0.4021
0.4538
0.3931
0.4112
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
Region
8C4
8D4
CLD-DS61
REV 14
18
XLAMP ® XM-L2 LED
STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
8000 K
0T
0C
0B
0D
0A
1U
1R
0U
CCy
0.36
0.35
0.34
0.28
0.36
0.35
0.34
0.33
0.32
0.31
0.28
0.30
0.28
0.33
0R
0.29
CCx
CCx
0.40
0.40
5000 K
0.39
5000 K
0.39
0.38
5700 K
0.38
3S
50
0.37
6500 K
0.36
8000 K
1U
0.31
1R
0.36
CCx
0.35
0.28
0.36
0.35
0.34
0.33
0.32
0.28
0.31
0.28
0.30
1R
0R
0.29
0.29
1U
0U
0.30
0R
ANSI
C78.377A
2R
1A
0D
0A
0U
0.29
0.28
0C
0B
2U
0.34
0A
0.30
0S
0.32
1D
0.33
0.31
ANSI
C78.377A
2R
1A
0D
3R
2A
1B
0.32
0C
0B
3A
2D
1C
0.31
0.32
0T
0.33
2U
0.30
0S
1D
2C
2B
1S
3R
2A
1B
3B
2S
1T
8000 K
0.34
0.29
0T
0.33
2D
1C
2T
E1
0.35
3A
2B
1S
0.36
3B
CCy
0.34
3S
6500 K
2C
1T
5700 K
0.37
2T
2S
0.35
CCy
ANSI
C78.377A
2R
1A
0A
2U
1D
0D
0.30
0R
0.29
0C
0B
0.31
1R
0U
0.29
0.28
0S
0.32
3R
2A
1B
0.32
0.30
1U
2D
1C
0.31
0.31
ANSI
C78.377A
2R
1A
0T
3A
2B
1S
0.33
2U
1D
0.34
0.30
0S
0.32
8000 K
3R
2A
1B
3B
2C
1T
3A
2D
1C
3S
2T
2S
0.35
0.29
0.33
0.36
3B
2B
1S
53
6500 K
2C
1T
0.34
5700 K
0.37
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0A
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
2D
1C
1B
0B
0.31
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
19
XLAMP ® XM-L2 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
0.36
E4
4C
4B
3C
4D
3B
6B2
5C3
5C2
5B3
6A3
5B4
5D3 6A2
5D2
6A4
5A3
5D4 6A1
5A2
5D1
5A4
5A1
5B1
6D2
6D1
6D3
6D4
7D1
7A4
7A1
8C2
8C3
8C4
8D3
8D2
8D4
8A4 8D1
8A1
7D4
8A3
8A2
7D3
7D2
7A3
7A2
7C1
7B4
7B1
6C4
6C1
6B4
5C4 6B1
5C1
5B2
6C3
6C2
6B3
8C1
8B4
8B1
7C4
8B3
8B2
7C3
7C2
7B3
7B2
E8
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
F5
5000 K
0.39
F4
0.38
0.37
4B
4D
3B
5C4
5C1
5B4
3C
0.36
5B3
5D3 6A2
5B1
5D2
5A3
5D4 6A1
5A2
5D1
5A4
5A1
6C2
6B3
6B4
6B1
6A3
6A4
7B2
6C3
6B2
5C3
5C2
5B2
4C
F6
F7
6C1
6D2
6D1
7B1
6C4
6D3
6D4
7A2
7A1
7A4
F8
7A3
7D1
7C2
7B3
7B4
7C1
7D4
8B1
7C4
7D3
7D2
7C3
8A1
8A2
8A3
8B2
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
8A4 8D1
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
20
XLAMP ® XM-L2 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS CONTINUED
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
Z6
4000 K
0.41
Z5
4500 K
0.40
CCy
Z7
3500 K
6C3
6C2
6B3
6B2
5C3
5000 K
0.39
5C2
5B3
5C1
5B2
5B4
0.38
4C
0.37
4B
3C
0.36
4D
3B
6B4
5C4 6B1
5D3 6A2
5B1
5D2
5A3
5D4 6A1
5A2
5D1
5A4
5A1
6A3
6A4
6C1
6D2
6D1
7B1
6C4
6D3
6D4
7A2
7A1
7A4
7B4
7A3
7D1
7C2
7B3
7B2
7C1
7D4
8B1
7C4
7D3
7D2
7C3
8A1
8A2
8A3
8B2
Z8
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
8A4 8D1
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
21
XLAMP ® XM-L2 LED
STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K
Z5
5A3, 5B4, 5C1, 5D2
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K
Z6
6A3, 6B4, 6C1, 6D2
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K
Z7
7A3, 7B4, 7C1, 7D2
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K
Z8
8A3, 8B4, 8C1, 8D2
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
22
XLAMP ® XM-L2 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes for XM-L2 LEDs are configured in the following manner:
Order Code
Bin Code
Series
XMLB = XM-L Gen 2
Series
XMLB = XM-L Gen 2
Internal code
Internal code
Minimum luminous flux group
Minimum luminous flux group
SSSSCC-BD-HHHH-NNNGFFWWW
Color specification
L = White
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Chromaticity group
Color specification
L = White
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
SSSSCC-B-WWW-FFF-GG-AAAA
Internal code
Internal code
Chromaticity group
Color
WT = White
Color
WT = White
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
23
XLAMP ® XM-L2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree LED has found XLamp XM-L2 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
IPC/JEDEC J-STD-020C
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
24
XLAMP ® XM-L2 LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree LED applies to ensure long-term reliability for XLamp
LEDs and details of Cree LED’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)
is also available upon request.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
25
XLAMP ® XM-L2 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
26
5.00
0.7
OPTICAL
MODEL
ORIGIN
5.00
XLAMP ® XM-L2 LED
B
ANODE
SIDE
R2.26
MECHANICAL DIMENSIONS
4
OPTICAL MODEL
ORIGIN
2
1
2
TOP
AllVIEW
measurements are ±.13 mm unless otherwise indicated.
SIDE VIEW
Thermal vias, if present, are not shown on these drawings.
3
3
4.78
5.00
0.50
0.73
0.73
OPTICAL
MODEL
ORIGIN
CATHODE
SIDE2
4.78
3
5.00
4.78
SOLDERMASK MAY
BE PRESENT
SIDE VIEW SIDE VIEW
BOTTOM VIEW
Side View
Bottom View
0.89
4.78
0.50
0.76
0.25
1.26
B
B
0.50
CATHODE CATHODE
SIDE
SIDE
0.50
0.76
0.96
0.89
0.89
1
0.52 0.96
0.29
0.89
0.50
2.10
3
0.50
1
CENTER PAD IS
ELECTRICALLY
ISOLATED
0.25
4.78
4.78
ANODE
SIDE
0.50
2.78
4.68
0.28
ANODE
SIDE
0.50
4.10
0.50
0.50 0.50
4
3.78 2
RECOMMENDED PCB2FOOTPRINT
2.78
4.68
4.78
0.50 0.50
3
4.78
4.78
3.78
2.78
4.78
4.78
4.78
4.68
3
4.78
0.28
TOP VIEW TOP VIEW
Top View
R2.26
4.78
OPTICAL MODEL
OPTICAL MODEL
ORIGIN
ORIGIN B
4.68
0.89
4.68
ANODE
SIDE
R2.26
4.68
A
ANODE
SIDE
0.50 0.50
4.10
5.00
4
4
0.50
ANODE
SIDE
0.25
OPTICAL
MODEL
ORIGIN
3.78
2.78
3.02
A
0.40
2.10
0.40
0.76
CENTER PAD
IS
CENTER
PAD IS 2.10
0.50
4.78
ELECTRICALLY
ELECTRICALLY
OOTPRINT
SOLDERMASK
MAY
SOLDERMASK
MAY
OPTIONAL
SOLDER
STENCIL
4.78
RECOMMENDED SOLDER STENCIL
MMENDED PCB FOOTPRINT
0.50
ISOLATED ISOLATED
RECOMMENDED SOLDER STENCIL
BE PRESENT
BE PRESENT
0.50
0.76
Recommended
Solder
Stencil*
Optional Solder Stencil*
Recommended
PCB
Footprint
0.50
0.76VIEW
BOTTOM
BOTTOM
0.500.25 VIEW
0.25
4
3
0.76
5.00
3.02
2
2610-500005
XML2
2610-50
2
1.26
1.26
0.50
2.78
2.78
0.76
0.50
0.76
0.25
0.25
0.50
0.76
0.52
0.29
0.25
0.76
4.78
0.52
0.29
0.25
4.78
3
2
1
4 Notes:
3
2
• Cree LED recommends using thermal pad kickouts to maximize component thermal performance.
• Cree LED recommends using white solder mask material to minimize system optical loss.
* This stencil has been tested and optimized for the avoidance of voiding when using ALPHA® LUMET® P30 Maxrel solder paste. For
other solder pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding
percentage. Contact your local
A
A
Cree LED Field Applications Engineer for consultation regarding your specific application.
0.76
0.76
OPTIONAL SOLDER STENCIL
OPTIONAL SOLDER STENCIL
4
2610-500005 XML2
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree
LED logo and XLamp
2610-500005
XML2® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
3 owners and do not imply specific product and/or vendor
2 endorsement, sponsorship or association.
1
property of their respective
3
2
CLD-DS61
REV 14
1
27
XLAMP ® XM-L2 LED
TAPE AND REEL
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm.
Po
T
E
Do
Bo
R
P2
W
A
Anode side
F
A
P1
B
D1
"H"
Ko
B-B SECTION
Bo (on a place in the
bottom of the corner
radii)
Ao (on a place in the
bottom of the corner
radii)
R
"I"
Ao
Item
Dim.
.
ITEM
Ao
Dim.
5.40
Bo
Ao
5.40 5.40
Ko
3.35
DETAIL"H"
DETAIL"I"
A-A SECTION
Bo
Po
5.40 4.00
Ko
Po
P2
3.35
8.00
4.00
2.00
P1
T
P1
E
0.36 8.00 1.75
ITEM
F
Do
D1
W
R
Dim.
5.50
1.50
1.50
12.00
3deg
P2
F
2.00 5.50
TDo
0.36
1.50
E
D1
1.75
1.50
W
R
12.00
3°
NOTICE
1) All Cree LED carrier tapes conform to EIA-481D, Automated Component handling Systems Standard
2) Measurement tolerances unless indicated otherwise: .xx = ±.15 mm
2402-M022 XML3
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
28
XLAMP ® XM-L2 LED
TAPE AND REEL - CONTINUED
Feed Direction
END
START
Trailer
Loaded Pockets
Leader
Min. 160 mm empty pockets
sealed with tape
1000 Lamps
Min. 400 mm empty pockets
with min. 100 mm sealed
Feed Direction
Cover Tape
Pocket Tape
13 mm
13”
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
29
XLAMP ® XM-L2 LED
PACKAGING
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
30
XLAMP ® XM-L2 LED
APPENDIX - ORDER CODES NOT FOR NEW DESIGNS
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 4 for
order codes of XLamp XM-L2 LEDs that could serve as alternatives for the order codes set forth below.
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA
Order Codes
Code
Flux (lm)
@ 85 °C
T5
260
T4
240
XMLBWT-00-0000-000PT4051
T3
220
XMLBWT-00-0000-000PT3051
T2
200
T5
260
T4
240
XMLBWT-00-0000-000PT4053
T3
220
XMLBWT-00-0000-000PT3053
T2
200
T5
260
T4
240
XMLBWT-00-0000-000PT4050
T3
220
XMLBWT-00-0000-000PT3050
T2
200
T5
260
T4
240
XMLBWT-00-0000-000PT40E1
T3
220
XMLBWT-00-0000-000PT30E1
T2
200
T5
260
T4
240
XMLBWT-00-0000-000PT40E2
T3
220
XMLBWT-00-0000-000PT30E2
T2
200
XMLBWT-00-0000-000PT20E2
65 CRI Typical
85 CRI Minimum
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
6200 K
6000 K
6200 K
6500 K
5700 K
XMLBWT-00-0000-0000T5051
XMLBWT-00-0000-000PT2051
XMLBWT-00-0000-0000T5053
XMLBWT-00-0000-000PT2053
XMLBWT-00-0000-0000T5050
XMLBWT-00-0000-000PT2050
XMLBWT-00-0000-0000T50E1
XMLBWT-00-0000-000PT20E1
XMLBWT-00-0000-0000T50E2
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
31
XLAMP ® XM-L2 LED
APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 5 page 6 for order codes of XLamp XM-L2 LEDs that could serve as alternatives for the order codes set forth below.
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA
Code
Flux (lm)
@ 85 °C
Order Codes
70 CRI Minimum
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
E4
F5
E5
Z5
5000 K
4750 K
4500 K
4250 K
T6
280
XMLBWT-00-0000000BT60E3
XMLBWT-00-0000000LT60E3
T5
260
XMLBWT-00-0000000BT50E3
XMLBWT-00-0000000LT50E3
T4
240
T6
280
XMLBWT-00-0000000BT60F4
T5
260
XMLBWT-00-0000000BT50F4
T4
240
T6
280
XMLBWT-00-0000000BT60E4
T5
260
XMLBWT-00-0000000BT50E4
T4
240
T6
280
XMLBWT-00-0000000BT60F5
T5
260
XMLBWT-00-0000000BT50F5
T4
240
T6
280
XMLBWT-00-0000000BT60E5
T5
260
XMLBWT-00-0000000BT50E5
XMLBWT-00-0000000LT50E5
XMLBWT-00-0000000HT50E5
T4
240
XMLBWT-00-0000000BT40E5
XMLBWT-00-0000000LT40E5
XMLBWT-00-0000000HT40E5
T3
220
XMLBWT-00-0000000LT30E5
XMLBWT-00-0000000HT30E5
T5
260
XMLBWT-00-0000000LT50Z5
XMLBWT-00-0000000HT50Z5
T4
240
XMLBWT-00-0000000LT40Z5
XMLBWT-00-0000000HT40Z5
T3
220
XMLBWT-00-0000000LT30Z5
XMLBWT-00-0000000HT30Z5
4000 K
4000 K
XMLBWT-00-0000000LT40E3
XMLBWT-00-0000000LT50F4
XMLBWT-00-0000000LT40F4
XMLBWT-00-0000000LT50E4
XMLBWT-00-0000000LT40E4
XMLBWT-00-0000000LT50F5
XMLBWT-00-0000000LT40F5
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
32
XLAMP ® XM-L2 LED
APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 7 page 9 for order codes of XLamp XM-L2 LEDs that could serve as alternatives for the order codes set forth below.
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA
Code
Flux (lm) @
85 °C
Order Codes
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F6
E6
Z6
F7
E7
3750 K
3500 K
3500 K
3250 K
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40F6
000HT40F6
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30F6
000HT30F6
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20F6
000HT20F6
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40E6
000HT40E6
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30E6
000HT30E6
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20E6
000HT20E6
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40Z6
000HT40Z6
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30Z6
000HT30Z6
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20Z6
000HT20Z6
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40F7
000HT40F7
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30F7
000HT30F7
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20F7
000HT20F7
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40E7
000HT40E7
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30E7
000HT30E7
T2
200
XMLBWT-00-0000- XMLBWT-00-0000- XMLBWT-00-0000000LT20E7
000HT20E7
000PT20E7
S6
182
XMLBWT-00-0000000PS60E7
S5
172
XMLBWT-00-0000000PS50E7
S4
164
XMLBWT-00-0000000PS40E7
3000 K
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
33
XLAMP ® XM-L2 LED
APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA
Code
Flux (lm) @
85 °C
Order Codes
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
Z7
F8
E8
T4
240
XMLBWT-00-0000- XMLBWT-00-0000000LT40Z7
000HT40Z7
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30Z7
000HT30Z7
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20Z7
000HT20Z7
S6
182
XMLBWT-00-0000000PS60Z7
S5
172
XMLBWT-00-0000000PS50Z7
S4
164
XMLBWT-00-0000000PS40Z7
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30F8
000LT30F8
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20F8
000HT20F8
S6
182
XMLBWT-00-0000- XMLBWT-00-0000- XMLBWT-00-0000000LS60F8
000HS60F8
000PS60F8
S5
172
XMLBWT-00-0000000PS50F8
S4
164
XMLBWT-00-0000000PS40F8
S3
156
XMLBWT-00-0000000PS30F8
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30E8
000HT30E8
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20E8
000HT20E8
S6
182
XMLBWT-00-0000- XMLBWT-00-0000- XMLBWT-00-0000000LS60E8
000HS60E8
000PS60E8
S5
172
XMLBWT-00-0000000PS50E8
S4
164
XMLBWT-00-0000000PS40E8
S3
156
XMLBWT-00-0000000PS30E8
3000 K
2850 K
2700 K
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
34
XLAMP ® XM-L2 LED
APPENDIX - ORDER CODES NOT FOR NEW DESIGNS - CONTINUED
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA
Code
Flux (lm) @
85 °C
Order Codes
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
Z8
T3
220
XMLBWT-00-0000- XMLBWT-00-0000000LT30Z8
000HT30Z8
T2
200
XMLBWT-00-0000- XMLBWT-00-0000000LT20Z8
000HT20Z8
S6
182
XMLBWT-00-0000- XMLBWT-00-0000000LS60Z8
000HS60Z8
S5
172
XMLBWT-00-0000000PS50Z8
S4
164
XMLBWT-00-0000000PS40Z8
S3
156
XMLBWT-00-0000000PS30Z8
2700 K
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, the Cree LED logo and XLamp® are
registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the
property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
CLD-DS61
REV 14
35
工商网监
湘ICP备2023018690号
