YDUU10.5-102L0601

Dip Common Line Filter ■ Features ● Metallization on ferrite core results in excellent shock resistance and damage-free durability. ● Closed magnetic circuit design reduces leakage flux and Electro Magnetic Interference(EMI). ● Fe base metal material core provides large saturation current. ● Automatic production ensures high quality and consistency. ■ Applications ● Protects AC side from the affecls of switching regulators. ● Provides noise elimination and immunlty for TVs,TVRs/VCRs,audio equipmens. ■ Product Identification ⑴ ：Type ⑵ ：Dimensions ⑶ ：Inductance ⑷ ：L=Vertical, W=Horizontal ⑸ ：Internal code ■ Shapes and Dimensions (Unit：mm) Part Number A B C Max. D E F G YDUU10.5-102L0601 19.0 Max. 17.0 Max. 22.0 0.7±0.1 3.5±0.5 13.0±0.5 10.0±0.5 深圳市益嘉源电子有限公司 http://www.yjycoin.com -1- Dip Common Line Filter ■ Schematic Diagram ■ Electrical Characteristics ITEM PIN NO. INDUCTANCE L DIFFERENCE SPEC. CONDITION EQUIPMENT L(1-3),L(2-4) N1=N2：1mH(Min) LCZ1061/1062 1KHz/0.25V/25-30℃ | L(1-3),L(2-4)| 0.3mH(Max) LCZ1061/1062 1KHz/0.25V/25-30℃ AC 1500V/50Hz TOS5030 1mA/60S L(1-3)-L(2-4) WITHSTAND VOLTAGE COIL-CORE ■ Winding Structure WINDING S F MAGNET WIRE TURNS WINDING TYPE N1 1 3 2UEW Φ0.60x1C 26Ts Ref CLOSE WINDING N2 2 4 2UEW Φ0.60x1C 26Ts Ref CLOSE WINDING ■ Material List No. Item Material Spec. Manufacturer (or of the same quality) 1 CORE UU10.5(AL:4.5K) Shandong Hengrui magnetoelectric Technology Co.,Ltd 2 WIRE 2UEW/155℃ Dongguan Yida Industrial Co.,Ltd 3 BOBBIN UU10.5 T375J Changchun Plastics Co.,Ltd 4 CLAMP UU10.5 Wan Jie Co.,Ltd 5 VARNISH T1148-1 YueYang Green Technology Co.,Ltd 深圳市益嘉源电子有限公司 http://www.yjycoin.com -2- Dip Common Line Filter ■ Technological Requirements 1，After soaking in oil, the product should be completely penetrated and dried. The finished product has neat appearance and good solderability of pins. 2，The product is vertical, and the two windings do not need to be wrapped with yellow tape. 3，Top printing：UU10.5-1mH ■ Packaging requirements 1，The products shall be packed in layers and intervals. If it is less than one box, padding shall be added to prevent impact, collision, etc. 2，The cartoon box outside the package shall be marked with the model name, quantity, ex factory date and the name of the manufacturer of the product; 3，After the goods arrive at the customer, the seal of the packing box shall be intact, the box shall be free of damage and cracking, and the packing materials in the box shall be free of damage. 深圳市益嘉源电子有限公司 http://www.yjycoin.com -3-