S-80839CNY-B2-U

S-808xxC Series www.ablic.com www.ablicinc.com SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR © ABLIC Inc., 2001-2015 Rev.6.2_02 The S-808xxC series is a series of high-precision voltage detectors developed using CMOS process. The detection voltage is fixed internally with an accuracy of 2.0%. Two output forms, Nch open-drain and CMOS output, are available. Super-low current consumption and miniature package lineup can meet demand from the portable device applications.  Features  Super-low current consumption       1.3 A typ. (detection voltage1.4 V, at VDD  1.5 V) 0.8 A typ. (detection voltage1.5 V, at VDD  3.5 V) High-precision detection voltage 2.0% Operating voltage range 0.65 V to 5.0 V (detection voltage1.4 V) 0.95 V to 10.0 V (detection voltage1.5 V) Hysteresis characteristics 5% typ. Detection voltage 0.8 V to 6.0 V (0.1 V step) Output form Nch open-drain output (Active Low) CMOS output (Active Low) Lead-free, Sn 100%, halogen-free*1 *1. Refer to “ Product Name Structure” for details.  Applications  Battery checkers  Power failure detectors  Power monitor for portable equipments such as pagers, calculators, electronic notebooks and remote controllers.  Constant voltage power monitor for cameras, video equipments and communication devices.  Power monitor for microcomputers and reset for CPUs.  Packages      SC-82AB SOT-23-5 SOT-89-3 SNT-4A TO-92 1 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Block Diagrams 1. Nch Open-drain Output Products VDD  OUT  *1 *1 VREF VSS *1. Parasitic diode Figure 1 2. CMOS Output Products VDD *1  *1 OUT  *1 VREF VSS *1. Parasitic diode Figure 2 2 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Product Name Structure The detection voltage, output form and packages for S-808xxC Series can be selected at the user's request. Refer to the “1. Product Name” for the construction of the product name, “2. Packages” regarding the package drawings and “3. Product Name List” for the full product names. 1. Product Name 1-1. SC-82AB, SOT-23-5, SOT-89-3 S - 808xx C x xx - xxx T2 x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) IC direction in tape specifications Product code *1 *2 Package code NB: SC-82AB MC: SOT-23-5 UA: SOT-89-3 Output form N: Nch open-drain output (Active Low) L: CMOS output (Active Low) Detection voltage value 08 to 60 (e.g. When the detection voltage is 0.8 V, it is expressed as 08.) *1. Refer to the tape specifications at the end of this book. *2. Refer to the Table 1 and 3 in the “3. Product Name List” 1-2. SNT-4A S - 808xx C x PF - xxx TF U Environmental code U: Lead-free (Sn 100%), halogen-free IC direction in tape specifications*1 Product code *2 Package code Output form N: Nch open-drain output (Active Low) L: CMOS output (Active Low) Detection voltage value 08 to 60 (e.g. When the detection voltage is 0.8 V, it is expressed as 08.) *1. Refer to the tape specifications at the end of this book. *2. Refer to the Table 2 and 4 in the “3. Product Name List” 3 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 1-3. TO-92 S - 808xx C xY-x 2 -U Environmental code U: Lead-free (Sn 100%), halogen-free Packing form B: Bulk Z: Tape and ammo Package code Y: TO-92 Output form N: Nch open-drain output (Active Low) L: CMOS output (Active Low) Detection voltage value 15 to 60 (e.g. When the detection voltage is 1.5 V, it is expressed as 15.) 2. Packages Package name SC-82AB Package NP004-A-P-SD SOT-23-5 MP005-A-P-SD SOT-89-3 UP003-A-P-SD SNT-4A PF004-A-P-SD TO-92 (Bulk) YS003-D-P-SD TO-92 (Tape and ammo) YZ003-E-P-SD 4 Tape NP004-A-C-SD NP004-A-C-S1 MP005-A-C-SD UP003-A-C-SD PF004-A-C-SD  YZ003-E-C-SD Drawing code Reel Zigzag Land NP004-A-R-SD   MP005-A-R-SD UP003-A-R-SD PF004-A-R-SD       YZ003-E-Z-SD   PF004-A-L-SD   Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 3. Product Name List 3-1. Nch Open-drain Output Products Table 1 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.4 V typ. 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 4.4  0.1 V*1 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V SC-82AB SOT-23-5 SOT-89-3 S-80808CNNB-B9MT2x S-80809CNNB-B9NT2x S-80810CNNB-B9OT2x S-80811CNNB-B9PT2x S-80812CNNB-B9QT2x S-80813CNNB-B9RT2x S-80814CNNB-B9ST2x S-80815CNNB-B8AT2x S-80816CNNB-B8BT2x S-80817CNNB-B8CT2x S-80818CNNB-B8DT2x S-80819CNNB-B8ET2x S-80820CNNB-B8FT2x S-80821CNNB-B8GT2x S-80822CNNB-B8HT2x S-80823CNNB-B8IT2x S-80824CNNB-B8JT2x  S-80825CNNB-B8KT2x S-80826CNNB-B8LT2x S-80827CNNB-B8MT2x S-80828CNNB-B8NT2x S-80829CNNB-B8OT2x S-80830CNNB-B8PT2x S-80831CNNB-B8QT2x S-80832CNNB-B8RT2x S-80833CNNB-B8ST2x S-80834CNNB-B8TT2x S-80835CNNB-B8UT2x S-80836CNNB-B8VT2x S-80837CNNB-B8WT2x S-80838CNNB-B8XT2x S-80839CNNB-B8YT2x        S-80815CNMC-B8AT2x S-80816CNMC-B8BT2x S-80817CNMC-B8CT2x S-80818CNMC-B8DT2x S-80819CNMC-B8ET2x S-80820CNMC-B8FT2x S-80821CNMC-B8GT2x S-80822CNMC-B8HT2x S-80823CNMC-B8IT2x S-80824CNMC-B8JT2x  S-80825CNMC-B8KT2x S-80826CNMC-B8LT2x S-80827CNMC-B8MT2x S-80828CNMC-B8NT2x S-80829CNMC-B8OT2x S-80830CNMC-B8PT2x S-80831CNMC-B8QT2x S-80832CNMC-B8RT2x S-80833CNMC-B8ST2x S-80834CNMC-B8TT2x S-80835CNMC-B8UT2x S-80836CNMC-B8VT2x S-80837CNMC-B8WT2x S-80838CNMC-B8XT2x S-80839CNMC-B8YT2x        S-80815CNUA-B8AT2x S-80816CNUA-B8BT2x S-80817CNUA-B8CT2x S-80818CNUA-B8DT2x S-80819CNUA-B8ET2x S-80820CNUA-B8FT2x S-80821CNUA-B8GT2x S-80822CNUA-B8HT2x S-80823CNUA-B8IT2x S-80824CNUA-B8JT2x S-80824KNUA-D2BT2x*2 S-80825CNUA-B8KT2x S-80826CNUA-B8LT2x S-80827CNUA-B8MT2x S-80828CNUA-B8NT2x S-80829CNUA-B8OT2x S-80830CNUA-B8PT2x S-80831CNUA-B8QT2x S-80832CNUA-B8RT2x S-80833CNUA-B8ST2x S-80834CNUA-B8TT2x S-80835CNUA-B8UT2x S-80836CNUA-B8VT2x S-80837CNUA-B8WT2x S-80838CNUA-B8XT2x S-80839CNUA-B8YT2x 5 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 Table 1 (2/2) Detection Hysteresis width SC-82AB SOT-23-5 SOT-89-3 voltage range (Typ.) 0.200 V S-80840CNNB-B8ZT2x S-80840CNMC-B8ZT2x S-80840CNUA-B8ZT2x 4.0 V2.0 % 0.205 V S-80841CNNB-B82T2x S-80841CNMC-B82T2x S-80841CNUA-B82T2x 4.1 V2.0 % 0.210 V S-80842CNNB-B83T2x S-80842CNMC-B83T2x S-80842CNUA-B83T2x 4.2 V2.0 % 0.215 V S-80843CNNB-B84T2x S-80843CNMC-B84T2x S-80843CNUA-B84T2x 4.3 V2.0 % 0.220 V S-80844CNNB-B85T2x S-80844CNMC-B85T2x S-80844CNUA-B85T2x 4.4 V2.0 % 0.225 V S-80845CNNB-B86T2x S-80845CNMC-B86T2x S-80845CNUA-B86T2x 4.5 V2.0 % 0.230 V S-80846CNNB-B87T2x S-80846CNMC-B87T2x S-80846CNUA-B87T2x 4.6 V2.0 % 0.10 V max. S-80846KNUA-D2CT2x*3 4.6 V 0.10 V   0.235 V S-80847CNNB-B88T2x S-80847CNMC-B88T2x S-80847CNUA-B88T2x 4.7 V2.0 % 0.240 V S-80848CNNB-B89T2x S-80848CNMC-B89T2x S-80848CNUA-B89T2x 4.8 V2.0 % 0.245 V S-80849CNNB-B9AT2x S-80849CNMC-B9AT2x S-80849CNUA-B9AT2x 4.9 V2.0 % 0.250 V S-80850CNNB-B9BT2x S-80850CNMC-B9BT2x S-80850CNUA-B9BT2x 5.0 V2.0 % 0.255 V S-80851CNNB-B9CT2x S-80851CNMC-B9CT2x S-80851CNUA-B9CT2x 5.1 V2.0 % 0.260 V S-80852CNNB-B9DT2x S-80852CNMC-B9DT2x S-80852CNUA-B9DT2x 5.2 V2.0 % 0.265 V S-80853CNNB-B9ET2x S-80853CNMC-B9ET2x S-80853CNUA-B9ET2x 5.3 V2.0 % 0.270 V S-80854CNNB-B9FT2x S-80854CNMC-B9FT2x S-80854CNUA-B9FT2x 5.4 V2.0 % 0.275 V S-80855CNNB-B9GT2x S-80855CNMC-B9GT2x S-80855CNUA-B9GT2x 5.5 V2.0 % 0.280 V S-80856CNNB-B9HT2x S-80856CNMC-B9HT2x S-80856CNUA-B9HT2x 5.6 V2.0 % 0.285 V S-80857CNNB-B9IT2x S-80857CNMC-B9IT2x S-80857CNUA-B9IT2x 5.7 V2.0 % 0.290 V S-80858CNNB-B9JT2x S-80858CNMC-B9JT2x S-80858CNUA-B9JT2x 5.8 V2.0 % 0.295 V S-80859CNNB-B9KT2x S-80859CNMC-B9KT2x S-80859CNUA-B9KT2x 5.9 V2.0 % 0.300 V S-80860CNNB-B9LT2x S-80860CNMC-B9LT2x S-80860CNUA-B9LT2x 6.0 V2.0 % *1. Describes the release voltage. *2. Refer to the Table 18 in “ Electricala Characteristics for Customized Products” for electrical characteristics. *3. Refer to the Table 20 in “ Electricala Characteristics for Customized Products” for electrical characteristics Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 6 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Table 2 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.4 V typ. 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % 4.0 V2.0 % 4.1 V2.0 % 4.2 V2.0 % 4.3 V2.0 % 4.4 V2.0 % 4.5 V2.0 % 4.6 V2.0 % 4.6 V0.10 V 4.7 V2.0 % 4.8 V2.0 % 4.9 V2.0 % 5.0 V2.0 % 5.1 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 4.4  0.1 V*2 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V 0.200 V 0.205 V 0.210 V 0.215 V 0.220 V 0.225 V 0.230 V 0.10 V max. 0.235 V 0.240 V 0.245 V 0.250 V 0.255 V SNT-4A TO-92*1 S-80808CNPF-B9MTFU S-80809CNPF-B9NTFU S-80810CNPF-B9OTFU S-80811CNPF-B9PTFU S-80812CNPF-B9QTFU S-80813CNPF-B9RTFU S-80814CNPF-B9STFU S-80815CNPF-B8ATFU S-80816CNPF-B8BTFU S-80817CNPF-B8CTFU S-80818CNPF-B8DTFU S-80819CNPF-B8ETFU S-80820CNPF-B8FTFU S-80821CNPF-B8GTFU S-80822CNPF-B8HTFU S-80823CNPF-B8ITFU S-80824CNPF-B8JTFU  S-80825CNPF-B8KTFU S-80826CNPF-B8LTFU S-80827CNPF-B8MTFU S-80828CNPF-B8NTFU S-80829CNPF-B8OTFU S-80830CNPF-B8PTFU S-80831CNPF-B8QTFU S-80832CNPF-B8RTFU S-80833CNPF-B8STFU S-80834CNPF-B8TTFU S-80835CNPF-B8UTFU S-80836CNPF-B8VTFU S-80837CNPF-B8WTFU S-80838CNPF-B8XTFU S-80839CNPF-B8YTFU S-80840CNPF-B8ZTFU S-80841CNPF-B82TFU S-80842CNPF-B83TFU S-80843CNPF-B84TFU S-80844CNPF-B85TFU S-80845CNPF-B86TFU S-80846CNPF-B87TFU  S-80847CNPF-B88TFU S-80848CNPF-B89TFU S-80849CNPF-B9ATFU S-80850CNPF-B9BTFU S-80851CNPF-B9CTFU        S-80815CNY-n2-U S-80816CNY-n2-U S-80817CNY-n2-U S-80818CNY-n2-U S-80819CNY-n2-U S-80820CNY-n2-U S-80821CNY-n2-U S-80822CNY-n2-U S-80823CNY-n2-U S-80824CNY-n2-U S-80824KNY-n2-U*3 S-80825CNY-n2-U S-80826CNY-n2-U S-80827CNY-n2-U S-80828CNY-n2-U S-80829CNY-n2-U S-80830CNY-n2-U S-80831CNY-n2-U S-80832CNY-n2-U S-80833CNY-n2-U S-80834CNY-n2-U S-80835CNY-n2-U S-80836CNY-n2-U S-80837CNY-n2-U S-80838CNY-n2-U S-80839CNY-n2-U S-80840CNY-n2-U S-80841CNY-n2-U S-80842CNY-n2-U S-80843CNY-n2-U S-80844CNY-n2-U S-80845CNY-n2-U S-80846CNY-n2-U S-80846KNY-n2-U*4 S-80847CNY-n2-U S-80848CNY-n2-U S-80849CNY-n2-U S-80850CNY-n2-U S-80851CNY-n2-U 7 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 Table 2 (2/2) Detection Hysteresis width SNT-4A TO-92*1 voltage range (Typ.) 0.260 V S-80852CNPF-B9DTFU S-80852CNY-n2-U 5.2 V2.0 % 0.265 V S-80853CNPF-B9ETFU S-80853CNY-n2-U 5.3 V2.0 % 0.270 V S-80854CNPF-B9FTFU S-80854CNY-n2-U 5.4 V2.0 % 0.275 V S-80855CNPF-B9GTFU S-80855CNY-n2-U 5.5 V2.0 % 0.280 V S-80856CNPF-B9HTFU S-80856CNY-n2-U 5.6 V2.0 % 0.285 V S-80857CNPF-B9ITFU S-80857CNY-n2-U 5.7 V2.0 % 0.290 V S-80858CNPF-B9JTFU S-80858CNY-n2-U 5.8 V2.0 % 0.295 V S-80859CNPF-B9KTFU S-80859CNY-n2-U 5.9 V2.0 % 0.300 V S-80860CNPF-B9LTFU S-80860CNY-n2-U 6.0 V2.0 % *1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo *2. Describes the release voltage. *3. Refer to the Table 18 in “ Electricala Characteristics for Customized Products” for electrical characteristics. *4. Refer to the Table 20 in “ Electricala Characteristics for Customized Products” for electrical characteristics. 8 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 3-2. CMOS Output Products Table 3 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % 4.0 V2.0 % 4.1 V2.0 % 4.2 V2.0 % 4.3 V2.0 % 4.4 V2.0 % 4.45 V typ. 4.5 V2.0 % 4.6 V2.0 % 4.7 V2.0 % 4.8 V2.0 % 4.9 V2.0 % 5.0 V2.0 % 5.1 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V 0.200 V 0.205 V 0.210 V 0.215 V 0.220 V 4.70 V max.*1 0.225 V 0.230 V 0.235 V 0.240 V 0.245 V 0.250 V 0.255 V SC-82AB SOT-23-5 SOT-89-3 S-80808CLNB-B7MT2x S-80809CLNB-B7NT2x S-80810CLNB-B7OT2x S-80811CLNB-B7PT2x S-80812CLNB-B7QT2x S-80813CLNB-B7RT2x S-80814CLNB-B7ST2x S-80815CLNB-B6AT2x S-80816CLNB-B6BT2x S-80817CLNB-B6CT2x S-80818CLNB-B6DT2x S-80819CLNB-B6ET2x S-80820CLNB-B6FT2x S-80821CLNB-B6GT2x S-80822CLNB-B6HT2x S-80823CLNB-B6IT2x S-80824CLNB-B6JT2x S-80825CLNB-B6KT2x S-80826CLNB-B6LT2x S-80827CLNB-B6MT2x S-80828CLNB-B6NT2x S-80829CLNB-B6OT2x S-80830CLNB-B6PT2x S-80831CLNB-B6QT2x S-80832CLNB-B6RT2x S-80833CLNB-B6ST2x S-80834CLNB-B6TT2x S-80835CLNB-B6UT2x S-80836CLNB-B6VT2x S-80837CLNB-B6WT2x S-80838CLNB-B6XT2x S-80839CLNB-B6YT2x S-80840CLNB-B6ZT2x S-80841CLNB-B62T2x S-80842CLNB-B63T2x S-80843CLNB-B64T2x S-80844CLNB-B65T2x  S-80845CLNB-B66T2x S-80846CLNB-B67T2x S-80847CLNB-B68T2x S-80848CLNB-B69T2x S-80849CLNB-B7AT2x S-80850CLNB-B7BT2x S-80851CLNB-B7CT2x        S-80815CLMC-B6AT2x S-80816CLMC-B6BT2x S-80817CLMC-B6CT2x S-80818CLMC-B6DT2x S-80819CLMC-B6ET2x S-80820CLMC-B6FT2x S-80821CLMC-B6GT2x S-80822CLMC-B6HT2x S-80823CLMC-B6IT2x S-80824CLMC-B6JT2x S-80825CLMC-B6KT2x S-80826CLMC-B6LT2x S-80827CLMC-B6MT2x S-80828CLMC-B6NT2x S-80829CLMC-B6OT2x S-80830CLMC-B6PT2x S-80831CLMC-B6QT2x S-80832CLMC-B6RT2x S-80833CLMC-B6ST2x S-80834CLMC-B6TT2x S-80835CLMC-B6UT2x S-80836CLMC-B6VT2x S-80837CLMC-B6WT2x S-80838CLMC-B6XT2x S-80839CLMC-B6YT2x S-80840CLMC-B6ZT2x S-80841CLMC-B62T2x S-80842CLMC-B63T2x S-80843CLMC-B64T2x S-80844CLMC-B65T2x  S-80845CLMC-B66T2x S-80846CLMC-B67T2x S-80847CLMC-B68T2x S-80848CLMC-B69T2x S-80849CLMC-B7AT2x S-80850CLMC-B7BT2x S-80851CLMC-B7CT2x        S-80815CLUA-B6AT2x S-80816CLUA-B6BT2x S-80817CLUA-B6CT2x S-80818CLUA-B6DT2x S-80819CLUA-B6ET2x S-80820CLUA-B6FT2x S-80821CLUA-B6GT2x S-80822CLUA-B6HT2x S-80823CLUA-B6IT2x S-80824CLUA-B6JT2x S-80825CLUA-B6KT2x S-80826CLUA-B6LT2x S-80827CLUA-B6MT2x S-80828CLUA-B6NT2x S-80829CLUA-B6OT2x S-80830CLUA-B6PT2x S-80831CLUA-B6QT2x S-80832CLUA-B6RT2x S-80833CLUA-B6ST2x S-80834CLUA-B6TT2x S-80835CLUA-B6UT2x S-80836CLUA-B6VT2x S-80837CLUA-B6WT2x S-80838CLUA-B6XT2x S-80839CLUA-B6YT2x S-80840CLUA-B6ZT2x S-80841CLUA-B62T2x S-80842CLUA-B63T2x S-80843CLUA-B64T2x S-80844CLUA-B65T2x S-80844KLUA-D2AT2x*2 S-80845CLUA-B66T2x S-80846CLUA-B67T2x S-80847CLUA-B68T2x S-80848CLUA-B69T2x S-80849CLUA-B7AT2x S-80850CLUA-B7BT2x S-80851CLUA-B7CT2x 9 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 Table 3 (2/2) Detection Hysteresis width SC-82AB SOT-23-5 SOT-89-3 voltage range (Typ.) 0.260 V S-80852CLNB-B7DT2x S-80852CLMC-B7DT2x S-80852CLUA-B7DT2x 5.2 V2.0 % 0.265 V S-80853CLNB-B7ET2x S-80853CLMC-B7ET2x S-80853CLUA-B7ET2x 5.3 V2.0 % 0.270 V S-80854CLNB-B7FT2x S-80854CLMC-B7FT2x S-80854CLUA-B7FT2x 5.4 V2.0 % 0.275 V S-80855CLNB-B7GT2x S-80855CLMC-B7GT2x S-80855CLUA-B7GT2x 5.5 V2.0 % 0.280 V S-80856CLNB-B7HT2x S-80856CLMC-B7HT2x S-80856CLUA-B7HT2x 5.6 V2.0 % 0.285 V S-80857CLNB-B7IT2x S-80857CLMC-B7IT2x S-80857CLUA-B7IT2x 5.7 V2.0 % 0.290 V S-80858CLNB-B7JT2x S-80858CLMC-B7JT2x S-80858CLUA-B7JT2x 5.8 V2.0 % 0.295 V S-80859CLNB-B7KT2x S-80859CLMC-B7KT2x S-80859CLUA-B7KT2x 5.9 V2.0 % 0.300 V S-80860CLNB-B7LT2x S-80860CLMC-B7LT2x S-80860CLUA-B7LT2x 6.0 V2.0 % *1. Describes the release voltage. *2. Refer to the Table 19 in “ Electricala Characteristics for Customized Products” for electrical characteristics. Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. Table 4 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 10 Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V SNT-4A TO-92*1 S-80808CLPF-B7MTFU S-80809CLPF-B7NTFU S-80810CLPF-B7OTFU S-80811CLPF-B7PTFU S-80812CLPF-B7QTFU S-80813CLPF-B7RTFU S-80814CLPF-B7STFU S-80815CLPF-B6ATFU S-80816CLPF-B6BTFU S-80817CLPF-B6CTFU S-80818CLPF-B6DTFU S-80819CLPF-B6ETFU S-80820CLPF-B6FTFU S-80821CLPF-B6GTFU S-80822CLPF-B6HTFU S-80823CLPF-B6ITFU S-80824CLPF-B6JTFU S-80825CLPF-B6KTFU S-80826CLPF-B6LTFU S-80827CLPF-B6MTFU S-80828CLPF-B6NTFU S-80829CLPF-B6OTFU S-80830CLPF-B6PTFU S-80831CLPF-B6QTFU S-80832CLPF-B6RTFU S-80833CLPF-B6STFU S-80834CLPF-B6TTFU S-80835CLPF-B6UTFU S-80836CLPF-B6VTFU S-80837CLPF-B6WTFU S-80838CLPF-B6XTFU        S-80815CLY-n2-U S-80816CLY-n2-U S-80817CLY-n2-U S-80818CLY-n2-U S-80819CLY-n2-U S-80820CLY-n2-U S-80821CLY-n2-U S-80822CLY-n2-U S-80823CLY-n2-U S-80824CLY-n2-U S-80825CLY-n2-U S-80826CLY-n2-U S-80827CLY-n2-U S-80828CLY-n2-U S-80829CLY-n2-U S-80830CLY-n2-U S-80831CLY-n2-U S-80832CLY-n2-U S-80833CLY-n2-U S-80834CLY-n2-U S-80835CLY-n2-U S-80836CLY-n2-U S-80837CLY-n2-U S-80838CLY-n2-U Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Table 4 (2/2) Detection Hysteresis width SNT-4A TO-92*1 voltage range (Typ.) 0.195 V S-80839CLPF-B6YTFU S-80839CLY-n2-U 3.9 V2.0 % 0.200 V S-80840CLPF-B6ZTFU S-80840CLY-n2-U 4.0 V2.0 % 0.205 V S-80841CLPF-B62TFU S-80841CLY-n2-U 4.1 V2.0 % 0.210 V S-80842CLPF-B63TFU S-80842CLY-n2-U 4.2 V2.0 % 0.215 V S-80843CLPF-B64TFU S-80843CLY-n2-U 4.3 V2.0 % 0.220 V S-80844CLPF-B65TFU S-80844CLY-n2-U 4.4 V2.0 % *2 4.45 V typ. 4.70 V max. S-80844KLY-n2-U*3  0.225 V S-80845CLPF-B66TFU S-80845CLY-n2-U 4.5 V2.0 % 0.230 V S-80846CLPF-B67TFU S-80846CLY-n2-U 4.6 V2.0 % 0.235 V S-80847CLPF-B68TFU S-80847CLY-n2-U 4.7 V2.0 % 0.240 V S-80848CLPF-B69TFU S-80848CLY-n2-U 4.8 V2.0 % 0.245 V S-80849CLPF-B7ATFU S-80849CLY-n2-U 4.9 V2.0 % 0.250 V S-80850CLPF-B7BTFU S-80850CLY-n2-U 5.0 V2.0 % 0.255 V S-80851CLPF-B7CTFU S-80851CLY-n2-U 5.1 V2.0 % 0.260 V S-80852CLPF-B7DTFU S-80852CLY-n2-U 5.2 V2.0 % 0.265 V S-80853CLPF-B7ETFU S-80853CLY-n2-U 5.3 V2.0 % 0.270 V S-80854CLPF-B7FTFU S-80854CLY-n2-U 5.4 V2.0 % 0.275 V S-80855CLPF-B7GTFU S-80855CLY-n2-U 5.5 V2.0 % 0.280 V S-80856CLPF-B7HTFU S-80856CLY-n2-U 5.6 V2.0 % 0.285 V S-80857CLPF-B7ITFU S-80857CLY-n2-U 5.7 V2.0 % 0.290 V S-80858CLPF-B7JTFU S-80858CLY-n2-U 5.8 V2.0 % 0.295 V S-80859CLPF-B7KTFU S-80859CLY-n2-U 5.9 V2.0 % 0.300 V S-80860CLPF-B7LTFU S-80860CLY-n2-U 6.0 V2.0 % *1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo *2. Describes the release voltage. *3. Refer to the Table 19 in “ Electricala Characteristics for Customized Products” for electrical characteristics. 11 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Output Forms 1. Output Forms in S-808xxC Series Table 5 Nch open-drain output products (Active Low) “N” is the last letter of the product name. e.g. S-80815CN S-808xxC Series CMOS output products (Active Low) “L” is the last letter of the product name. e.g. S-80815CL 2. Output Forms and Their Usage Table 6 Usage Nch open-drain output products CMOS output products (Active Low) (Active Low) Different power supplies Yes No Active Low reset for CPUs Yes Yes Active High reset for CPUs No No Detection voltage change by resistor divider Yes No  Example for two power supplies VDD1 VDD2 V/D Nch VSS OUT CPU  Example for one power supply VDD VDD V/D CMOS OUT CPU VSS VSS Figure 3 12 V/D Nch OUT CPU SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Pin Configurations Table 7 SC-82AB Top view 4 3 1 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VDD Voltage input pin 3 NC*1 No connection 4 VSS GND pin *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. 2 Figure 4 Table 8 SOT-23-5 Top view 5 1 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VDD Voltage input pin 3 VSS GND pin 4 NC*1 No connection 5 NC*1 No connection *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. 4 2 3 Figure 5 Table 9 SOT-89-3 Top view 1 2 Pin No. 1 2 3 Symbol OUT VDD VSS Description Voltage detection output pin Voltage input pin GND pin 3 Figure 6 Table10 SNT-4A Top view 1 4 2 3 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VSS GND pin 3 NC*1 No connection 4 VDD Voltage input pin *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. Figure 7 13 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series TO-92 Bottom view 1 2 3 Figure 8 14 Rev.6.2_02 Table 11 Pin No. 1 2 3 Symbol OUT VDD VSS Description Voltage detection output pin Voltage input pin GND pin Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series  Absolute Maximum Ratings 1. Detection Voltage Typ. 1.4 V or Less Products Table 12 Item Power supply voltage Output voltage Nch open-drain output products CMOS output products Output current Power SC-82AB dissipation SNT-4A Symbol VDDVSS VOUT IOUT PD Operating ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm  76.2 mm  t1.6 mm (2) Board name: JEDEC STANDARD51-7 (Ta  25 C unless otherwise specified) Absolute maximum ratings Unit 7 V V VSS0.3 to VSS7 V VSS0.3 to VDD0.3 50 mA 150 (When not mounted on board) mW 350*1 mW 140 (When not mounted on board) mW 300*1 mW 40 to 85 C 40 to 125 C Power Dissipation PD (mW) Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 500 400 SC-82AB 300 200 SNT-4A 100 0 0 50 100 150 Ambient Temperature Ta (C) Figure 9 Power Dissipation of Package (When Mounted on Board) 15 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 2. Detection Voltage Typ. 1.5 V or More Products Table 13 Item Power supply voltage Output voltage Nch open-drain output products CMOS output products Output current Power SC-82AB dissipation SOT-23-5 Symbol VDDVSS VOUT IOUT PD SOT-89-3 SNT-4A TO-92 Operating ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm  76.2 mm  t1.6 mm (2) Board name: JEDEC STANDARD51-7 (Ta  25 C unless otherwise specified) Absolute maximum ratings Unit 12 V V VSS0.3 to VSS12 V VSS0.3 to VDD0.3 50 mA 150 (When not mounted on board) mW 350*1 mW 250 (When not mounted on board) mW 600*1 mW 500 (When not mounted on board) mW 1000*1 mW 140 (When not mounted on board) mW 300*1 mW 400 (When not mounted on board) mW 800*1 mW 40 to 85 C 40 to 125 C Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation PD (mW) 1200 SOT-89-3 1000 TO-92 800 SOT-23-5 600 SC-82AB 400 200 0 SNT-4A 0 50 100 150 Ambient Temperature Ta (C) Figure 10 Power Dissipation of Package (When Mounted on Board) 16 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series  Electrical Characteristics 1. Nch Open-drain Output Products 1-1. Detection Voltage Typ.1.4 V or Less Products Table 14 Item Symbol Condition Detection voltage*1 VDET  Release voltage VDET Hysteresis width VHYS Current consumption ISS Operating voltage VDD Output current IOUT Leakage current ILEAK Response time tPLH S-80808 S-80809 S-80810 S-80811 S-80812 S-80813 S-80814 S-80808 S-80809 S-80810 S-80811 S-80812 S-80813 S-80814 VDD  1.5 V VDD  2.0 V S-80808 to 09 S-80810 to 14  Output transistor, Nch, VDS  0.5 V, VDD  0.7 V Output transistor, Nch, VDS  5.0 V, VDD  5.0 V  (Ta  25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit VDET(S) VDET(S) VDET(S) V 1 0.98 1.02 V 1 0.802 0.834 0.867 V 1 0.910 0.944 0.979 V 1 1.017 1.054 1.091 V 1 1.125 1.164 1.203 V 1 1.232 1.273 1.315 V 1 1.340 1.383 1.427 V 1 1.448 1.493 1.538 V 1 0.018 0.034 0.051 V 1 0.028 0.044 0.061 V 1 0.037 0.054 0.071 V 1 0.047 0.064 0.081 V 1 0.056 0.073 0.091 V 1 0.066 0.083 0.101 V 1 0.076 0.093 0.110 1.3 3.5 2  A 1.3 3.5 2  A 0.65 5.0 V 1  0.04 0.2  mA 3   60 nA 3   60 s 1 Detection voltage   VDET ppm/ temperature 1 Ta  40 to 85 C 100 350  C *2  Ta   V DET coefficient *1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 1 to 2.) *2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta   VDET Ta *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 17 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 1-2. Detection Voltage Typ.1.5 V or More Products Table 15 Item Symbol Condition Detection voltage*1 VDET  Hysteresis width VHYS  Current consumption ISS Operating voltage Output current VDD IOUT Leakage current ILEAK VDD  3.5 V VDD  4.5 V VDD  6.0 V VDD  7.5 V S-80815 to 26 S-80827 to 39 S-80840 to 56 S-80857 to 60  Output transistor, VDD  1.2 V Nch, VDS  0.5 V S-80815 to 60 VDD  2.4 V S-80827 to 60 Output transistor, Nch, VDS  10.0 V, VDD  10.0 V  (Ta  25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit VDET(S) VDET(S) VDET(S) V 1 0.98 1.02 VDET VDET VDET V 1 0.03 0.05 0.08 0.8 2.4 2  A 2 0.8 2.4  A 2 0.9 2.7  A 2 0.9 2.7  A 0.95 10.0 V 1  0.59 1.36  mA 3 2.88 4.98  mA 3   100 nA 3 Response time tPLH 60 1   s Detection voltage   VDET ppm/ 1 temperature Ta  40 to 85 C 100 350  C Ta   VDET coefficient*2 *1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 1 to 2.) *2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta Ta   VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 18 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 2. CMOS Output Products 2-1. Detection Voltage Typ.1.4 V or Less Products Table 16 Item Symbol Detection voltage*1 VDET Release voltage VDET Hysteresis width VHYS Current consumption ISS Operating voltage Output current VDD IOUT (Ta  25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit VDET(S) VDET(S) VDET(S) V 1  0.98 1.02 S-80808 0.802 0.834 0.867 V 1 S-80809 0.910 0.944 0.979 V 1 S-80810 1.017 1.054 1.091 V 1 S-80811 1.125 1.164 1.203 V 1 S-80812 1.232 1.273 1.315 V 1 S-80813 1.340 1.383 1.427 V 1 S-80814 1.448 1.493 1.538 V 1 S-80808 0.018 0.034 0.051 V 1 S-80809 0.028 0.044 0.061 V 1 S-80810 0.037 0.054 0.071 V 1 S-80811 0.047 0.064 0.081 V 1 S-80812 0.056 0.073 0.091 V 1 S-80813 0.066 0.083 0.101 V 1 S-80814 0.076 0.093 0.110 V 1 S-80808 to 09 1.3 3.5 2  A VDD  1.5 V S-80810 to 14 1.3 3.5 2  A VDD  2.0 V 0.65 5.0 V 1   Output transistor, 0.04 0.2 mA 3  Nch, VDS  0.5 V, VDD  0.7 V Output transistor, 2.9 5.8 mA 4  Pch, VDS  2.1 V, VDD  4.5 V 60 1    s Response time tPLH Detection voltage   VDET ppm/ 1 temperature Ta  40 to 85 C 100 350  C *2  Ta   V DET coefficient *1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 3 to 4.) *2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta   VDET Ta *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 19 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 2-2. Detection Voltage Typ.1.5 V or More Products Table 17 Item Symbol Condition Detection voltage*1 VDET  Hysteresis width VHYS  Current consumption ISS Operating voltage Output current VDD IOUT VDD  3.5 V VDD  4.5 V VDD  6.0 V VDD  7.5 V S-80815 to 26 S-80827 to 39 S-80840 to 56 S-80857 to 60  Output transistor, VDD  1.2 V Nch, VDS  0.5 V S-80815 to 60 VDD  2.4 V S-80827 to 60 Output transistor, VDD  4.8 V Pch, VDS  0.5 V S-80815 to 39 VDD  6.0 V S-80840 to 56 VDD  8.4 V S-80857 to 60  (Ta  25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit VDET(S) VDET(S) VDET(S) V 1 0.98 1.02 VDET VDET VDET V 1 0.03 0.05 0.08 0.8 2.4 2  A 0.8 2.4 2  A 0.9 2.7 2  A 0.9 2.7 2  A 0.95 10.0 V 1  0.59 1.36  mA 3 2.88 4.98  mA 3 1.43 2.39  mA 4 1.68 2.78  mA 4 2.08 3.42  mA 4 Response time tPLH 60 1   s Detection voltage   VDET ppm/ 1 temperature Ta  40 to 85 C 100 350  °C *2  Ta   V DET coefficient *1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 3 to 4.) *2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta Ta   VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 20 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Test Circuits 1. VDD VDD S-808xxC V *1 R 100 k OUT Series V VSS *1. R is unnecessary for CMOS output products. Figure 11 2. A VDD VDD S-808xxC OUT Series VSS Figure 12 3. VDD VDD S-808xxC V OUT A Series VSS VDS V Figure 13 4. VDS VDD VDD S-808xxC V V OUT A Series VSS Figure 14 21 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Timing Chart 1. Nch Open-drain Output Products VDD Release voltage (VDET) Detection voltage (VDET) Hysteresis width (VHYS) Minimum operating voltage VSS OUT VSS VDD R 100 k VDD V Output from the OUT pin VSS Figure 15 2. CMOS Output Products VDD Release voltage (VDET) Detection voltage (VDET) Hysteresis width (VHYS) Minimum operating voltage VSS VDD OUT VSS VDD V Output from the OUT pin VSS Remark For values of VDD less than minimum operating voltage, values of OUT terminal output is free in the shaded region. Figure 16 22 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series  Operation 1. Basic Operation: CMOS Output (Active Low) 1-1. When the power supply voltage (VDD) is higher than the release voltage (VDET), the Nch transistor is OFF and the Pch transistor is ON to provide VDD (high) at the output. Since the Nch transistor N1 in (RB  RC)  VDD . Figure 17 is OFF, the comparator input voltage is RA  RB  RC 1-2. When the VDD goes below VDET, the output provides the VDD level, as long as the VDD remains above the detection voltage VDET. When the VDD falls below VDET (point A in Figure 18), the Nch transistor becomes ON, the Pch transistor becomes OFF, and the VSS level appears at the output. At this time the Nch transistor N1 in Figure 17 becomes ON, the comparator input voltage is changed to RB  VDD . RA  RB 1-3. When the VDD falls below the minimum operating voltage, the output becomes undefined, or goes to the VDD when the output is pulled up to the VDD. 1-4. The VSS level appears when the VDD rises above the minimum operating voltage. The VSS level still appears even when the VDD surpasses VDET, as long as it does not exceed the release voltage VDET. 1-5. When the VDD rises above VDET (point B in Figure 18), the Nch transistor becomes OFF and the Pch transistor becomes ON to provide VDD level at the output. VDD *1 RA *1  Pch OUT  *1 RB Nch VREF VSS RC N1 *1. Parasiteic diode Figure 17 Operation 1 23 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series (1) (2) (3) (4) B A Hysteresis width (VHYS) Rev.6.2_02 (5) VDD Release voltage (VDET) Detection voltage (VDET) Minimum operating voltage VSS VDD Output from the OUT pin VSS Figure 18 Operation 2 2. Other Characteristics 2-1. Temperature Characteristics of Detection Voltage The shaded area in Figure 19 shows the temperature characteristics of the detection voltage. VDET [V] 0.945 mV/C VDET25 *1 0.945 mV/C 40 *1. 25 85 Ta [C] VDET25 is an actual detection voltage value at 25°C. Figure 19 Temperature Characteristics of Detection Voltage (Example for S-80827C) 2-2. Temperature Characteristics of Release Voltage The temperature change   VDET of the release voltage is calculated by using the temperature Ta   VDET of the detection voltage as follows: Ta   VDET  VDET   VDET   Ta  VDET Ta The temperature change of the release voltage and the detection voltage have the same sign consequently. chnange 24 Rev.6.2_02 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 2-3. Temperature Characteristics of Hysteresis Voltage The temperature change of the hysteresis voltage is expressed as   VDET   VDET  and is calculated Ta Ta as follows:   VDET   VDET VHYS   VDET    Ta Ta  VDET Ta  Standard Circuit R*1 100 k VDD OUT VSS *1. R is unnecessary for CMOS output products. Figure 20 Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants.  Technical Terms 1. Detection Voltage (VDET), Release Voltage (VDET) The detection voltage (VDET) is a voltage at which the output turns to low. The detection voltage varies slightly among products of the same specification. The variation of detection voltage between the specified minimum (VDET) Min. and the maximum (VDET) Max. is called the detection voltage range (Refer to Figure 21). Example: For the S-80815CN, the detection voltage lies in the range of 1.470(VDET)1.530. This means that some S-80815CNs have 1.470 V for VDET and some have 1.530 V. The release voltage (VDET) is a voltage at which the output turns to high. The release voltage varies slightly among products of the same specification. The variation of release voltages between the specified minimum (VDET) Min. and the maximum (VDET) Max. is called the release voltage range (Refer to Figure 22). The range is calculed from the actual detection voltage (VDET) of a product and is expressed by VDET1.03VDETVDET 1.08. Example: For the S-80815CN, the release voltage lies in the range of 1.514(VDET)1.652. This means that some S-80815CNs have 1.514 V for VDET and some have 1.652 V. 25 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series VDD Detection voltage (VDET) Max. Detection voltage range (VDET) Min. Rev.6.2_02 VDD Release voltage (VDET) Max. Release voltage range (VDET) Min. OUT OUT Figure 21 Detection Voltage (CMOS Output Products) Figure 22 Release Voltage (CMOS Output Products) Remark Although the detection voltage and release voltage overlap in the range of 1.514 V to 1.530 V, VDET is always larger than VDET. 2. Hysteresis Width (VHYS) The hysteresis width is the voltage difference between the detection voltage and the release voltage (The voltage at point B The voltage at point A VHYS in Figure 18). The existence of the hysteresis width prevents malfunction caused by noise on input signal. 3. Through-type Current The through-type current refers to the current that flows instantaneously at the time of detection and release of a voltage detector. The through-type current is large in CMOS output products, small in Nch open-drain output products. 4. Oscillation In applications where a resistor is connected to the voltage detector input (Figure 23), taking a CMOS active low product for example, the through-type current which is generated when the output goes from low to high (release) causes a voltage drop equal to [through-type current][input resistance] across the resistor. When the input voltage drops below the detection voltage (VDET) as a result, the output voltage goes to low level. In this state, the through-type current stops and its resultant voltage drop disappears, and the output goes from low to high. A through-type current is again generated, a voltage drop appears, and repeating the process finally induces oscillation. VDD RA VIN S-808xxCL OUT RB VSS Figure 23 An Example for Bad Implementation of Input Voltage Divider 26 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Electrical Characteristics for Customized Products 1. S-80824KNUA-D2BT2x, S-80824KNY-n2-U Table 18 Item Symbol *1 Detection voltage Release voltage Current consumption Operating voltage Output current VDET VDET ISS VDD IOUT Leakage current ILEAK (Ta  25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit 2.295 2.400*2 2.505 V 1  4.300 4.400 4.500 V 1  0.8 2.4 2  A VDD6.0 V 0.95 10.0 V 1   0.24 mA 3  Output transistor, VDD  0.95 V 0.03 Nch, VDS  0.5 V VDD  1.2 V 0.23 0.50 mA 3  Output transistor, 0.1 3   A Nch, VDD  10.0 V, VDS  10.0 V 60 1    s Response time tPLH Detection voltage   VDET 1 temperature Ta  40 to 85 °C 100 350 ppm/°C  Ta   VDET coefficient*3 *1. VDET: Actual detection voltage value *2. Specified detection voltage value (VDET(S)) *3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta Ta   VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 27 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 2. S-80844KLUA-D2AT2x, S-80844KLY-n2-U Table 19 Item Symbol *1 Detection voltage Release voltage Current consumption Operating voltage Output current VDET VDET ISS VDD IOUT (Ta  25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit 4.295 4.450*2 4.605 V 1  4.700 V 1    1.0 3.0 2  A VDD  6.0 V 0.95 10.0 V 1   0.50 mA 3  Output transistor, VDD  1.2 V 0.23 Nch, VDS  0.5 V VDD  2.4 V 1.60 3.70 mA 3  Output transistor, 0.62 mA 4  VDD  4.8 V 0.36 Pch, VDS  0.5 V 60 1    s Response time tPLH Detection voltage   VDET 1 temperature Ta  40 to 85 °C 100 350 ppm/°C  Ta   VDET coefficient*3 *1. VDET: Actual detection voltage value *2. Specified detection voltage value (VDET(S)) *3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta Ta   VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 28 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 3. S-80846KNUA-D2CT2x, S-80846KNY-n2-U Table 20 Item Symbol Condition Detection voltage Hysteresis width Current consumption Operating voltage Output current VDET VHYS ISS VDD IOUT Leakage current ILEAK Response time Detection voltage temperature coefficient*3 tPLH   VDET Ta   VDET   VDD  6.0 V  Output transistor, VDD  1.2 V Nch, VDS  0.5 V VDD  2.4 V Output transistor, Nch, VDD  10.0 V, VDS  10.0 V  *1 Ta  40 to 85 °C (Ta  25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit *2 4.500 4.600 4.700 V 1 0.05 0.10 V 1  0.9 2.7 2  A 0.95 10.0 V 1  0.59 1.36 mA 3  2.88 4.98 mA 3    0.1 A 3   60 s 1  100 350 ppm/°C 1 *1. VDET: Actual detection voltage value *2. Specified detection voltage value (VDET(S)) *3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.   VDET mV/ C*1   VDET(S) Typ. V *2    VDET ppm/ C*3  1000 Ta   VDET Ta *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient  Precautions  Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit.  In CMOS output products of the S-808xxC series, the through-type current flows at the detection and the release. If the input impedance is high, oscillation may occur due to the voltage drop by the through-type current during releasing.  In CMOS output products oscillation may occur when a pull-down resistor is used, and falling speed of the power supply voltage (VDD) is slow near the detection voltage.  When designing for mass production using an application circuit described herein, the product deviation and temperature characteristics should be taken into consideration. ABLIC Inc. shall not bear any responsibility for the products on the circuits described herein.  ABLIC Inc. claims no responsibility for any and all disputes arising out of or in connection with any infringement of the products including this IC upon patents owned by a third party. 29 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02  Typical Characteristics (Typical Data) 1. Detection Voltage (VDET) - Temperature (Ta) S-80808CL S-80814CL 0.90 1.55 +VDET 1.50 +VDET 1.45 VDET (V) VDET (V) 0.85 1.40 -VDET 1.35 0.80 -VDET 1.30 1.25 0.75 -40 -20 0 20 Ta (°C) 40 60 -40 80 S-80815CL -20 0 20 40 60 80 20 40 60 80 20 40 60 80 40 60 80 Ta (°C) S-80860CL 1.60 6.40 6.30 +VDET VDET (V) VDET (V) 1.55 1.50 -VDET +VDET 6.20 6.10 6.00 -VDET 5.90 5.80 1.45 -40 -20 0 20 Ta (°C) 40 60 -40 80 -20 0 -20 0 Ta (°C) 2. Hysteresis Voltage Width (VHYS) - Temperature (Ta) S-80814CL 8.0 7.0 7.0 6.0 6.0 VHYS (%) V HYS (%) S-80808CL 8.0 5.0 4.0 3.0 -40 5.0 4.0 3.0 -20 0 20 40 Ta (°C) 60 80 -40 Ta (°C) S-80815CL 8.0 S-80860CL 8.0 7.0 6.0 VHYS (%) V HYS (%) 7.0 5.0 4.0 3.0 -40 30 6.0 5.0 4.0 3.0 -20 0 20 40 Ta (°C) 60 80 -40 -20 0 20 Ta (°C) SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 3. Current Consumption (ISS) - Input Voltage (VDD) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 Ta=25°C S-80814CL 9.3 A ISS (A) ISS (A) S-80808CL 0 1.0 2.0 3.0 4.0 5.0 Ta=25°C 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 21.5 A 6.0 0 1.0 2.0 VDD (V) Ta=25°C 4.7 A 0 2.0 4.0 6.0 8.0 10.0 6.0 12.8 A 0 12.0 4. Current Consumption (ISS) - Temperature (Ta) S-80808CL VDD1.5 V 2.0 2.0 4.0 6.0 VDD (V) 8.0 S-80814CL 10.0 12.0 VDD2.0 V 2.0 1.5 ISS (A) 1.5 ISS (A) 5.0 Ta=25°C 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 VDD (V) 1.0 0.5 0.0 1.0 0.5 0.0 -40 -20 0 20 40 60 80 -40 Ta (°C) VDD3.5 V S-80815CL 2.0 -20 0 20 Ta (°C) 40 S-80860CL 60 80 VDD7.5 V 2.0 1.5 1.5 ISS (A) ISS (A) 4.0 S-80860CL ISS (A) ISS (A) S-80815CL 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 3.0 VDD (V) 1.0 0.5 0.0 -40 -20 0 20 Ta (°C) 40 60 80 1.0 0.5 0.0 -40 -20 0 20 Ta (°C) 40 60 80 31 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 5. Nch Transistor Output Current (IOUT) – VDS S-80814CL/CN 5.0 Ta=25°C VDD1.3 V 4.0 3.0 VDD1.0 2.0 1.0 Ta=25°C 6.0 V 40 IOUT (mA) IOUT (mA) S-80860CL/CN 50 VDD0.7 V 0 4.8 V 30 3.6 V 20 2.4 V 10 VDD1.2 V 0 0 0.5 1.0 1.5 VDS (V) 2.0 2.5 0 1.0 2.0 3.0 VDS (V) 4.0 5.0 6. Pch Transistor Output Current (IOUT) -VDS Ta=25ºC 4.0 VDD2.9V 3.0 VDD2.4V 2.0 VDD1.9 V 1.0 0 0.5 Ta=25ºC 8.4 V 25 VDD1.4 V VDD0.9 V 0 S-80815CL 30 IOUT (mA) IOUT (mA) S-80808CL 5.0 20 7.2 V 6.0 V 15 4.8 V 3.6 V 10 5 VDD2.4 V 0 1.0 1.5 VDS (V) 2.0 0 2.5 2.0 4.0 6.0 VDS (V) 8.0 10.0 7. Nch Transistor Output Current (IOUT) - Input Voltage (VDD) S-80814CL/CN VDS0.5 V 6.0 S-80860CL/CN 20 VDS0.5 V Ta=-40°C Ta=-40°C 15 Ta=25°C IOUT (mA) IOUT (mA) 4.5 3.0 1.5 Ta=85° 0 0 0.5 1.0 VDD (V) 1.5 Ta=25°C 10 5 Ta=85°C 0 2.0 0 2.0 4.0 VDD (V) 6.0 8.0 8. Pch Transistor Output Current (IOUT) - Input Voltage (VDD) S-80808CL VDS0.5 V 3.0 IOUT (mA) IOUT (mA) Ta=25°C 1.0 Ta=85°C 1.0 2.0 3.0 VDD (V) 32 4.0 5.0 4 Ta=25°C 3 2 Ta=85°C 1 0 0 Ta=-40°C 5 1.5 0.5 VDS0.5 V 6 Ta=-40°C 2.5 2.0 S-80815CL 6.0 0 0 2.0 4.0 6.0 VDD (V) 8.0 10.0 12.0 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 9. Minimum Operating Voltage - Input Voltage (VDD) S-80808CN Pull-up to VDD 100 k 4.0 0.9 3.0 VOUT (V) Ta=-40°C VOUT (V) S-80808CN 1.2 0.6 Ta=25°C 0.3 Ta=85°C 0.0 0.0 0.2 0.4 0.6 Pull-up to VDD 100 k Ta=85°C 1.0 0.2 4.0 1.5 3.0 VOUT (V) VOUT (V) Ta=-40°C Ta=25°C 0.5 Ta=85°C 0.0 0 0.5 1.0 VDD (V) S-80808CN 2.0 Pull-up to VDD :100 k 0.65 0.60 1.5 Ta=-40°C 0.4 0.6 0.8 VDD (V) S-80815CN 2.0 1.0 Ta=25°C 2.0 VDD (V) S-80815CN Ta=-40°C 0.0 1.0 0.8 Pull-up to 3 V 1.0 Pull-up to 3 V Ta=-40°C Ta=25°C 2.0 Ta=85°C 1.0 0.0 0 0.5 1.0 VDD (V) 1.5 2.0 VOUT(V) PULL-UP VDDmin (V) 0.55 0.50 PULL-UP0.1 0.45 0.40 Ta=25°C 0.35 Ta=85°C 0.30 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 PULL-UP (V) S-80815CN 0.75 0.70 Pull-up to VDD :100 k 0 VDDmin VDD(V) Remark VDDmin. is defined by the VDD voltage at which VOUT goes below 10 of PULL-UP voltage when the VDD increase from 0 V. Figure 24 Ta=-40°C VDDmin (V) 0.65 0.60 0.55 0.50 0.45 Ta=85°C Ta=25°C 0.40 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 PULL-UP (V) 33 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 10. Dynamic Response - COUT S-80808CL Response time (ms) tpHL 0.1 0.01 tpLH 0.001 0.00001 0.0001 0.001 0.01 S-80808CN 0.1 0.01 tpLH 0.0001 0.001 0.01 0.01 tpLH 0.001 0.01 Load Capacitance (F) 34 Respone time (ms) Response time (ms) tpLH 0.01 tpHL 0.01 0.0001 0.001 0.01 0.1 Ta=25°C tpLH 10 1 0.1 tpHL 0.01 0.0001 0.001 0.01 0.1 Ta=25°C 100 0.01 0.001 0.1 S-80860CN 0.1 0.0001 tpLH Load Capacitance (F) tpHL 0.001 0.00001 Ta=25°C 1 0.001 0.00001 0.1 Ta=25°C 1 0.1 100 Load Capacitance (F) S-80860CL 0.01 S-80815CN Response time (ms) Response time (ms) 0.1 0.0001 0.001 Load Capacitance (F) tpHL 0.001 0.00001 0.0001 10 0.001 0.00001 0.1 Ta=25°C 1 tpHL 0.01 100 Load capacitanse (F) S-80815CL 0.1 S-80814CN Response time (ms) Response time (ms) tpHL 0.001 0.00001 1 Load capacitance (F) Ta=25°C 1 tpLH 10 0.001 0.00001 0.1 Load capacitance (F) S-80814CL Ta=25°C 100 Resopnse time (ms) Ta=25°C 1 0.1 tpLH 10 1 0.1 tpHL 0.01 0.001 0.00001 0.0001 0.001 0.01 Load Capacitance (F) 0.1 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 1 s 1 s VIH VDD Input voltagae V VIL tpHL VDD S-808xxC OUT Series COUT VSS tpLH VDD VDD90 % Output voltage *1 R 100 k V *1. R is unnecessary for CMOS output products. VDD10 % VIH10 V, VIL0.95 V Figure 25 Measurement Condition for Response Time Figure 26 Measurement Circuit for Response Time Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants.  Application Circuit Examples 1. Microcomputer Reset Circuits If the power supply voltage to a microcomputer falls below the specified level, an unspecified operation may be performed or the contents of the memory register may be lost. When power supply voltage returns to normal, the microcomputer needs to be initialized before normal operations can be done. Reset circuits protect microcomputers in the event of current being momentarily switched off or lowered. Reset circuits shown in Figures 27 to 28 can be easily constructed with the help of the S-808xxC series, that has low operating voltage, a high-precision detection voltage and hysteresis. VDD1 VDD2 VDD S808xxCL S808xxCN Microcomputer Microcomputer VSS VSS (Only for Nch open-drain products) Figure 27 Reset Circuit Example(S-808xxCL) Figure 28 Reset Circuit Example (S-808xxCN) Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. 35 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 2. Power-on Reset Circuit A power-on reset circuit can be constructed using Nch open-drain output product of S-808C Series. VDD Di *1 R VIN (R75 k) *2 S808xxCN OUT (Nch open-drain products) C VSS *1. Resistor R should be 75 k or less to prevent oscillation. *2. Diode Di instantaneously discharges the charge stored in the capacitor (C) at the power falling,Di can be removed when the delay of the falling time is not important. Figure 29 VDD (V) OUT (V) t (s) t (s) Figure 30 Remark When the power rises sharply as shown in the Figure 31 left, the output may goes to the high level for an instant in the undefined region where the output voltage is undefined since the power voltage is less than the minimum operation voltage. VDD (V) OUT (V) t (s) t (s) Figure 31 36 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.2_02 3. Change of Detection Voltage In Nch open-drain output products of the S-808xxC series, detection voltage can be changed using resistance dividers or diodes as shown in Figures 32 to 33. In Figure 32, hysteresis width also changes. VDD VDD RA Vf1 *1 (RA75 k) RB S808xxCN VIN Vf2 OUT VIN S808xxCN   OUT (Nch open-drain output product) (Nch open-drain output products) VSS VSS RA  RB   VDET RB RA  RB Hysterisis width   VHYS RB Detection voltagae  Detection voltage=Vf1+Vf2+(VDET) *1. RA should be 75 k or less to prevent oscillation. Caution If RA and RB are large, the hysteresis width may aloso be larger than the value given by the above equation due to the through-type current (which flows slightly in an Nch open-drain product). Figure 32 Figure 33 Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. 37 2.0±0.2 1.3±0.2 4 3 0.05 0.3 +0.1 -0.05 +0.1 0.16 -0.06 2 1 +0.1 0.4 -0.05 No. NP004-A-P-SD-2.0 TITLE SC82AB-A-PKG Dimensions NP004-A-P-SD-2.0 No. ANGLE UNIT mm ABLIC Inc. +0.1 ø1.5 -0 4.0±0.1 2.0±0.05 1.1±0.1 4.0±0.1 0.2±0.05 ø1.05±0.1 (0.7) 2.2±0.2 2 1 3 4 Feed direction No. NP004-A-C-SD-3.0 TITLE SC82AB-A-Carrier Tape No. NP004-A-C-SD-3.0 ANGLE UNIT mm ABLIC Inc. 4.0±0.1 2.0±0.1 ø1.5 1.1±0.1 +0.1 -0 4.0±0.1 0.2±0.05 ø1.05±0.1 2.3±0.15 2 1 3 4 Feed direction No. NP004-A-C-S1-2.0 TITLE SC82AB-A-Carrier Tape No. NP004-A-C-S1-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. NP004-A-R-SD-1.1 TITLE SC82AB-A-Reel No. NP004-A-R-SD-1.1 QTY. ANGLE UNIT mm ABLIC Inc. 3,000 2.9±0.2 1.9±0.2 4 5 1 2 +0.1 0.16 -0.06 3 0.95±0.1 0.4±0.1 No. MP005-A-P-SD-1.3 TITLE SOT235-A-PKG Dimensions No. MP005-A-P-SD-1.3 ANGLE UNIT mm ABLIC Inc. 4.0±0.1(10 pitches:40.0±0.2) +0.1 ø1.5 -0 +0.2 ø1.0 -0 2.0±0.05 0.25±0.1 4.0±0.1 1.4±0.2 3.2±0.2 3 2 1 4 5 Feed direction No. MP005-A-C-SD-2.1 TITLE SOT235-A-Carrier Tape No. MP005-A-C-SD-2.1 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. MP005-A-R-SD-1.1 SOT235-A-Reel TITLE No. MP005-A-R-SD-1.1 ANGLE QTY. UNIT mm ABLIC Inc. 3,000 4.5±0.1 1.5±0.1 1.6±0.2 45° 1 2 3 1.5±0.1 1.5±0.1 0.4±0.05 0.4±0.1 0.4±0.1 0.45±0.1 No. UP003-A-P-SD-2.0 TITLE SOT893-A-PKG Dimensions No. UP003-A-P-SD-2.0 ANGLE UNIT mm ABLIC Inc. 4.0±0.1(10 pitches : 40.0±0.2) +0.1 ø1.5 -0 2.0±0.05 ø1.5 +0.1 -0 0.3±0.05 8.0±0.1 2.0±0.1 4.75±0.1 Feed direction No. UP003-A-C-SD-2.0 TITLE SOT893-A-Carrier Tape No. UP003-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 16.5max. 13.0±0.3 Enlarged drawing in the central part (60°) (60°) No. UP003-A-R-SD-1.1 TITLE SOT893-A-Reel No. UP003-A-R-SD-1.1 ANGLE UNIT QTY. mm ABLIC Inc. 1,000 1.2±0.04 3 4 +0.05 0.08 -0.02 2 1 0.65 0.48±0.02 0.2±0.05 No. PF004-A-P-SD-6.0 TITLE SNT-4A-A-PKG Dimensions No. PF004-A-P-SD-6.0 ANGLE UNIT mm ABLIC Inc. +0.1 ø1.5 -0 4.0±0.1 2.0±0.05 0.25±0.05 +0.1 1.45±0.1 2 1 3 4 ø0.5 -0 4.0±0.1 0.65±0.05 Feed direction No. PF004-A-C-SD-2.0 TITLE SNT-4A-A-Carrier Tape No. PF004-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. PF004-A-R-SD-1.0 TITLE SNT-4A-A-Reel No. PF004-A-R-SD-1.0 QTY. ANGLE UNIT mm ABLIC Inc. 5,000 0.52 1.16 2 0.52 0.35 1. 2. 0.3 1 (0.25 mm min. / 0.30 mm typ.) (1.10 mm ~ 1.20 mm) 0.03 mm 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package (1.10 mm to 1.20 mm). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 2. (0.25 mm min. / 0.30 mm typ.) (1.10 mm ~ 1.20 mm) TITLE SNT-4A-A -Land Recommendation PF004-A-L-SD-4.1 No. No. PF004-A-L-SD-4.1 ANGLE UNIT mm ABLIC Inc. 4.2max. 5.2max. Marked side 0.6max. 0.45±0.1 0.45±0.1 1.27 No. YS003-D-P-SD-2.1 TITLE TO92-D-PKG Dimensions No. YS003-D-P-SD-2.1 ANGLE UNIT mm 5.2max. 4.2max. Marked side 0.6max. 0.45±0.1 0.45±0.1 +0.4 2.5 -0.1 1.27 No. YZ003-E-P-SD-2.1 TITLE TO92-E-PKG Dimensions No. YZ003-E-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. 12.7±1.0 1.0max. 1.0max. 1.0max. Marked side 1#pin 3#pin 1.45max. 0.7±0.2 ø4.0±0.2 6.35±0.4 12.7±0.3(20 pitches : 254.0±1.0) Z type Feed direction No. YZ003-E-C-SD-1.1 TITLE TO92-E-Radial Tape No. YZ003-E-C-SD-1.1 ANGLE UNIT mm ABLIC Inc. Spacer(Sponge) 312 18 35 Side spacer placed in front side 154 314 Space more than 4 strokes 162 333 43 No. YZ003-E-Z-SD-2.0 TITLE TO92-E-Ammo Packing No. YZ003-E-Z-SD-2.0 ANGLE UNIT QTY. mm ABLIC Inc. 2,000 Disclaimers (Handling Precautions) 1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use of the information described herein. 3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described herein. 4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to the use of the products outside their specified ranges. 5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear, biological or chemical weapons or missiles, or use any other military purposes. 8. The products are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by ABLIC, Inc. Do not apply the products to the above listed devices and equipments. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of the products. 9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system in which the products are used must be sufficiently evaluated and judged whether the products are allowed to apply for the system on customer's own responsibility. 10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be careful when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright information and know-how of ABLIC Inc. The information described herein does not convey any license under any intellectual property rights or any other rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express permission of ABLIC Inc. 14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales representative. 15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into the English language and the Chinese language, shall be controlling. 2.4-2019.07 www.ablic.com