M3EEK-1618R

3M™ Pak 100 Card-Edge .100″ Without Mounting Flange 3000 Series • Reinforced card-edge resists mouth bowing for consistent contact performance • Metal cover clips provide superior cover retention • Bifurcated contacts provide reliable contact with PC boards • Keying plug 3439-2 provides polarization and/ or keying • Optional strain relief • RoHS* compliant Date Modified: February 15, 2005 TS-0010-13 Sheet 1 of 2 Physical Insulation Material: Glass Filled Polyester (PBT) Flammability: Color: Contact Material: Plating: Underplating and U-Slot: Wiping Area:: Wire Accommodation: UL 94V-0 Gray Copper Alloy 100 µ″ [ 2.54 µm ] Nickel - QQ-N-290, Class 2 30 µ″ [ 0.76 µm ] Gold - MIL-G-45204, Type II, Grade C 26 & 28 AWG Solid & Stranded Marking: 3M Logo and Part Identification Number Electrical Current Rating: 1 A Insulation Resistance: > 1 × 109Ω at 500 VDC Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ -55°C to +105°C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 100 Card-Edge .100″ Without Mounting Flange Contact Quantity 3M Part Number Strain Relief Part Number 10 3358 16 3368 3000 Series Dimensions A A2 B C D 3448-52 0.96 [ 24.4 ] 0.97 [ 24.6 ] 0.85 [ 21.6 ] 0.612 [ 15.54 ] 0.95 [ 24.1 ] 3448-53 1.26 [ 32.0 ] 1.27 [ 32.3 ] 1.15 [ 29.2 ] 0.912 [ 23.16 ] 1.25 [ 31.8 ] 1.47 [ 37.3 ] 1.35 [ 34.3 ] 1.112 [ 28.24 ] 1.45 [ 36.8 ] 20 3461 3448-54 1.46 [ 37.1 ] 26 3462 3448-55 1.76 [ 44.7 ] 1.77 [ 45.0 ] 1.65 [ 41.9 ] 1.412 [ 35.86 ] 1.75 [ 44.4 ] 34 3463 3448-56 2.16 [ 54.9 ] 2.17 [ 55.1 ] 2.05 [ 52.1 ] 1.812 [ 46.02 ] 2.15 [ 54.6 ] 40 3464 3448-57 2.46 [ 62.5 ] 2.47 [ 62.7 ] 2.35 [ 59.7 ] 2.112 [ 53.64 ] 2.45 [ 62.2 ] 2.97 [ 75.4 ] 2.85 [ 72.4 ] 2.612 [ 66.34 ] 2.95 [ 74.9 ] 50 3415 3448-58 2.96 [ 75.2 ] 60 3666 3448-31 3.46 [ 87.9 ] 3.47 [ 88.1 ] 3.35 [ 85.1 ] 3.112 [ 79.04 ] 3.45 [ 87.6 ] 64 3403 3448-59 3.66 [ 93.0 ] 3.67 [ 93.2 ] 3.55 [ 90.2 ] 3.312 [ 84.12 ] 3.65 [ 92.7 ] In c h [m m ] T o le ra n c e U n le s s N o te d in c h .0 .0 0 ± .1 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly Connector Body C 19 1 2 .100 Ref [ 2.54 ] 20 .44 [ 11.2 ] Note; 1 1/2° Draft Typ Ref Assembled Height .44 [ 11.2 ] A Without Strain Relief .71 [ 18.0 ] .71 Ref [ 18.0 ] .050 Ref [ 1.27 ] .50 [ .51 ] A2 With Strain Relief “U” Contact Connector Cover Cable .96 Ref [ 24.4 ] B Breakaway Tab 3XXX .20 [ 5.1 ] OptionalStrain Relief (Order Separately) 3439-2 .39 [ 9.9 ] Stainless Steel .015 [ 0.38 ] Thick .133 [ 3.38 ] .115 [ 2.92 ] Glass-Filled Gray Polyester .21 [ 5.3 ] Cable D .025 [ 0.64 ] .06 [ 1.5 ] Optional Keying Plug Material-Glass Filled Polyester .36 [ 9.1 ] Note: For recommended board layout see drawing number TS-0014. Ordering Information XXXX-0001 3M Part Number: See Table Application tools: 3640 press (or equivalent), 3443-63 locator plate, 3442-30. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0010-13 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd Minimum 10% Post-consumer Fiber Printed in USA. © 3M 2005