1618

UNISONIC TECHNOLOGIES CO., LTD 1618 6 KEYS SIREN/ALARM SOUND GENERATOR DESCRIPTION The UTC 1618 is a CMOS design for 6 different alarm sounds application. According to the priority of the select keys, the sound of UTC 1618 will be generated in cycling sequence. CMOS IC FEATURES * Auto power off function, reduce power consumption. * Low operating voltage: 2V ~ 5V. * On-chip RC oscillator. * 6 different sounds. * 6 prioritized keys for selecting 6 different sounds. * Low stand by current. * CMOS process. Lead-free: 1618L Halogen-free: 1618G ORDERING INFORMATION Normal 1618-D16-T Ordering Number Lead Free 1618L-D16-T Halogen Free 1618G-D16-T Package DIP-16 Packing Tube www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-007.E 1618 PIN CONFIGURATION 16 15 14 UTC 1618 13 12 11 10 9 VDD S3 S5 S4 S6 S2 S1 GND 1 2 3 4 5 6 7 8 NC NC OSC2 OSC1 BZ2 BZ1 NC INI CMOS IC PIN DESCRIPTIONS PIN # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PIN NAME VDD S3 S5 S4 S6 S2 S1 GND INI NC BZ1 BZ2 OSC1 OSC2 NC NC I/O I I I I I I I O O O I O DESCRIPTION Power supply pin (+). Sound selection keys. These keys connect with internal pull-down resistors. The sound output will be enabled when a key is connected to VDD. On other hands, the sound output will be disabled if a key is N.C. or connected to GND. When two or more keys are selected in the same time, the sound will be generated in cycling sequence. According to the priority of the keys, the proirity of S1~S6 list below : S1>S2>S6>S4>S5>S3. Power supply pin (-). An internal pull-up resistor. Might disable BZ1, BZ2, when connected to GND. No connecting. Audio output pins. Oscillator pin with external resistor. No connecting. No connecting. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-007.E 1618 ABSOLUTE MAXIMUM RATING CMOS IC PARAMETER SYMBOL RATINGS UNIT Supply Voltage VDD -0.3 ~ 6 V Input Voltage VIN -0.3 ~ VDD+0.3 V Output Voltage VOUT -0.3 ~ VDD+0.3 V Operating Temperature TOPR 0 ~ 65 °C Storage Temperature TSTG -40 ~ 125 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (VDD=3V,Ta=25°C, unless otherwise specified) PARAMETER Operating Voltage BZ1, BZ2 Driving Current Stand-By Current Operating Current Operating Frequency SYMBOL VDD IOH IOL Isb Iop Fop MIN 2 1 1 TYP 3 MAX 5 UNIT V mA mA uA uA KHz 70 10 300 80 20 500 128 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-007.E 1618 APPLICATION CIRCUIT (Ⅰ) CMOS IC (Ⅱ) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-007.E 1618 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-007.E