MP2-H048-41P5-S-KR

3M™ MetPak™ 2-FB Header 2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin MP2 Series Solder Tail • End-to-end stackable • Select load capability • Monoblockable • Shoulder Pin Press Fit • End-to-end stackable • Early mate late break for hot swapping (press-fit EMLB adjusted by application tooling) • Select load capability • Monoblockable • Push-on shoulder pin • Optional feed-through tail for rear plug-up midplane applications • Accepts Universal Tooling • RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013  Physical TS-1120-E Sheet 1 of 4 Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Phosphor Bronze Plating: Underplating: 50 µ" [1.27 µm] Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Current Rating: Signal: 1.5 A – All contacts simultaneously Insulation Resistance: 103 MΩ Withstanding Voltage: 1,000 VAC Environmental Temperature Rating: -55°C to +125°C Process Temperature Rating: 260°C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Header 2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin MP2 Series POSITION X 2.00 .079 "A" 6.00 .236 POSITION 2 POSITION 1 15.80 .622 FOR SPECIAL MONOBLOCKS AND PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVE 11.50 .453 1.40 .055 2.00 .079 17.00 .669 mm [inch] Tolerance Unless Noted 3.50 .138 12.00 .472 mm 4 ROW PRODUCT 0 0.0 0.00 ±3 ±0.3 ±0.13 [ ] Dimensions for Reference Only 17.80 .701 13.52 .532 MATING LENGTH "B" TAIL LENGTH 14.00 .551 E D C B A "C" ROW 5 ROW PRODUCT SOLDER TAIL PRODUCT PRESS FIT PRODUCT PRESS FIT PRODUCT REAR PLUG-UP Notes: 1. Refer to IEC 61076-4-104 Futurebus+® global standard. 2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.” Contact 3M For Rear Plug-Up Option Ordering Information MP2 - HXXX - XXXX - S - XXXXX Plating Options (See Table 4) H = Header Pin Count (See Table 1) Rows 4 = 4 Rows 5 = 5 Rows Shouldered Pins Tail Length (See Table 3) Loading Pattern (See Table 2) Termination Style P = Press-Fit S = Solder Tail TS-1120-E Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Header 2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin Table 4 - Plating Options Table 1 - Connector & Row Lengths Pin Count Dim. “A” mm [inch] Dim “C” mm [inch] MP2 Series Rows Plating Suffix Press-Fit Tails* Solder Tails KR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.76 μm [30 μ”] Min. Au Contact Area 2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over LR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.08 μm [3 μ”] Min. Au Contact Area 0.67 μm [27 μ”] Min. PdNi Contact Area 2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over KV for rear plugup only (RIA E1 & C1 apply) 024 11.95 [0.471] 10.00 [0.394] 4 048 23.95 [0.943] 22.00 [0.866] 4 072 35.95 [1.415] 34.00 [1.339] 4 096 47.95 [1.889] 46.00 [1.811] 4 120 59.95 [2.36] 58.00 [2.283] 4 144 71.95 [2.833] 70.00 [2.756] 4 168 83.95 [3.305] 82.00 [3.228] 4 192 95.95 [3.778] 94.00 [3.701] 4 030 11.95 [0.471] 10.00 [0.394] 5 060 23.95 [0.943] 22.00 [0.866] 5 090 35.95 [1.415] 34.00 [1.339] 5 120 47.95 [1.888] 46.00 [1.811] 5 150 59.95 [2.361] 58.00 [2.283] 5 180 71.95 [2.833] 70.00 [2.756] 5 210 83.95 [3.305] 82.00 [3.228] 5 240 95.95 [3.778] 94.00 [3.701] 5 Plating Composition 0.76 µm [30 µ”] Min. Au Primary Contact Area 0.10 µm [4 µ”] Min. Au Needle Eye Area 0.10 µm [4 µ”] Min. Au Secondary Contact Area 1.27 m [50 µ”] Min. Ni all over Table 3 - Tail Length Options Plating Suffix Solder Tail Press-Fit* Tail 1 1 3 Dim. “B” 4.60 [0.181] 2.72 [0.107] *Compliant-Pin Tail Table 2 - Mate Length vs. Loading Pattern Loading Pattern Code Description Mate length Row A Mate length Row B Mate length Row C Mate length Row D Mate length Row E (5-Row Prod. Only) 1 All Positions Filled 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 2 All Positions Filled 6.50 [0.256] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 3 All Positions Filled 6.50 [0.256] 5.75 [0.226] 5.75 [0.226] 6.50 [0.256] 6.50 [0.256] 4 All Positions Filled 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 5 All Positions Filled 5.75 [0.226] 7.25 [0.285] 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] 6 All Positions Filled 7.25 [0.285] 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] 7 All Positions Filled 6.50 [0.256] 5.75 [0.226] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] 8 All Positions Filled 6.50 [0.256] 5.00 [0.197] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 9 All Positions Filled 5.00 [0.197] 6.50 [0.256] 5.00 [0.197] 5.00 [0.197] 5.00 [0.197] A All Positions Filled 5.00 [0.197] 5.75 [0.226] 6.50 [0.256] 5.75 [0.226] 5.00 [0.197] B All Positions Filled 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] 5.75 [0.226] C All Positions Filled 5.00 [0.197] 5.00 [0.197] 6.50 [0.256] 5.00 [0.197] 5.00 [0.197] D All Positions Filled 5.75 [0.226] 5.75 [0.226] 7.25 [0.285] 5.75 [0.226] 5.75 [0.226] E All Positions Filled 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] G All Positions Filled 7.25 [0.285] 5.75 [0.226] 5.75 [0.226] 5.00 [0.197] 5.00 [0.197] H All Positions Filled 5.00 [0.197] 5.75 [0.226] 5.75 [0.226] 7.25 [0.285] 7.25 [0.285] J All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] K All Positions Filled 5.00 [0.197] 6.50 [0.256] 7.25 [0.285] 6.50 [0.256] 5.00 [0.197] TS-1120-E Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Header 2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin 16.00 .630 MIN 12.00 .472 2.00 .079 MP2 Series 1 6 .0 0 . 6 3 0 M IN 2.00 .079 A1 12.00 .472 "C" "D" PLATED THRU HO LE Ø 0.10 12.00 .472 2.00 .079 Ø CENTER HOLES OPTIONAL FOR 3M PRODUCT 6.00 .236 1.50 +.10 -.00 UNPLATED .059 +.004 -.000 "D " P L A T E D T H R U H O L E Ø 0 .1 0 Ø 0.10 RECOMMENDED 4 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN RECOMMENDED 4 ROW PRESS-FIT Table 5 - HOLE PLATING FINISHES HOLE Finished Dia. MM [in] Immersion Matte Sn Thickness microns [µ”] Electrolytic Au Thickness microns [µ"] OSP ENTEK Thickness microns [µ”] Drilled Hole Dia. mm [in] “D” 0.700-0.800 [.0276-.0315] 0.025-0.045 [0.001-0.002] 0.1 - 0.5 [4 - 20] 0.2 - 0.5 [8 - 20] 0.830-0.860 [.0330-.0340] or 0.85 mm [#66] TWIST DRILL 18.00 .709 MIN 14.00 .551 Ø 6.00 .236 2.00 .079 "D " P L A T E D T H R U H O L E 0 .1 0 2.00 .079 A1 12.00 .472 "C" 12.00 .472 "D" PLATED THRU HOLE Ø 0.10 2.00 .079 Ø 1.50 .059 +.10 -.00 +.004 -.000 UNPLATED CENTER HOLES OPTIONAL FOR 3M PRODUCT 1 8 .0 0 .7 0 9 M IN Ø 0.10 RECOMMENDED 5 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN RECOMMENDED 5 ROW PRESS-FIT PCB HOLE MOUNTING PATTERN TS-1120-E Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. © 3M 2013. All rights reserved. RIA-2217B-E