67-22SURSYGC_09

A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Top View LEDs With Bi-Color Part Number: 67-22SURSYGC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260℃. If temperature is higher, time should be shorter (+10℃ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM Resin (mold) Lens color Printed circuit board Material & For Reflow Soldering Emitted color SYG SUR MATERIALS Epoxy Water Clear BT AlGaInP AlGaInP Hyper Red Super Yellow Green NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC ELECTRO-OPTICAL CHARACTERISTICS Parameter Forward voltage Luminous intensity (TA=25℃) Unit V Value Test Emitted Symbol MIN. TYP. MAX. Color Condition SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VF IV λp λd △λ IFP PD IR ESD − − − − − − − − − − 2.0 2.0 60 25 630 575 625 570 20 20 160 160 60 60 10 2000 2.4 2.4 − − − − − − − − mcd Wavelength nm Spectral Line Half-Width Peak pulsing current (1/10 duty f=1kHz) Power Dissipation Reverse current Electrostatic Discharge nm mA mW μA mA Absolute maximum ratings Parameter Symbol 2θ1/2 IF VR Top Tstg Value 120 20 5 (TA=25℃) Unit Viewing angle at 50% IV Forward current Reverse voltage Operating temperature range Storage temperature range Deg mA V ℃ ℃ 2009/2/20 -40 ~+85 -40 ~+90 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Test items and results of reliability NO 1 Item Reflow Test Conditions TEMP：240±5℃ Min. 5sec. H：+100℃ 15min ∫ 5min L：-40℃ 15min H：+100℃ 5min ∫ 10set L：-10℃ 5min TEMP：100℃ Test Sample Size Ac/Re Hours/Cycle 6 MIN. 22 PCS 0/1 2 Temperature Cycle 300 CYCLES 22 PCS 0/1 3 Thermal Shock 300 CYCLES 22 PCS 0/1 4 High Temperature Storage Low Temperature Storage 1000 HRS 22 PCS 0/1 5 TEMP：-55℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life High Temperature / High Humidity IF=20mA 1000 HRS 22 PCS 0/1 7 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊Refer to reliability test standard specification for in this line. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2009/2/20