AOCJY2

OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series FEATURES: • 21.0 x 21.0 x 11.0 mm Leaded- RoHS Compliant Reflow-able Package • SC-Cut, High “Q” resonator based design • Either Sinewave or CMOS RF output • Available with ±30 ppb over -40°C to +75°C operating temperature range • Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available • Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life • Excellent close-in phase noise (-140 dBc/Hz Max. @100Hz offset; 10MHz carrier) Pb RoHS Compliant 21.0 x 21.0 x 11.0 mm ||||||||||||| || APPLICATIONS: • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN STANDARD SPECIFICATIONS: Parameters RF Output Frequency Standard Available Frequencies Waveform Level "1" (Logic High) Level "0" (Logic Low) Load Rise & Fall Time Duty Cycle Waveform Peak Power Output Load Short Term Stability Operable Temperature Range Frequency Stability Options 0º C to +50ºC -20º C to +70ºC -40º C to +75ºC Frequency Stability vs. Supply Voltage (Vdd ± 5%) Frequency Stability vs. Load Variation (± 10%) Warm-Up @ 25 ºC Power Consumption @ turn on Power Consumption Steady State Supply Voltage (Vdd) Note #1: Minimum Typical Maximum Units Notes Overall Frequency range 10.00 100.00 MHz 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz CMOS 0.9*Vdd 0.1*Vdd 15 6. 0 45 Sinewave 2.00 50 -10 2x10 -40 75 ±5.00 ±10.00 ±30.00 ±5.00 ±5.00 ±100.00 3.00 1.00 3.46 dBm Ω /second ºC ppb ppb ppb ppb ppb ppb Watts Watts Volts 55 Volts Volts pf ns % Alan Variance See Stability Options Default Spec. Option “E” Option “F” (Note #1) In < 3-minutes 3.13 3.30 See Options ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ABRACON IS ABRACON IS ISO9001:2008 CE R TIFIED CE R TIFIED OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series STANDARD SPECIFICATIONS - continued. Parameters Aging Daily First Year 10-Years Spectral Content Spurious Response Phase Noise (10MHz Carrier) @ 5V @1 @ 10 @ 100 Hz offset Hz offset Hz offset Minimum Typical Maximum ±1.0 ±100 ±500 -35 Units ppb ppb ppb dBc Notes Pb RoHS Compliant 21.0 x 21.0 x 11.0 mm ||||||||||||||| -90 -120 -140 -145 -150 dBc dBc dBc dBc dBc @ 1,000 Hz offset @ 10,000 Hz offset Electrical Frequency Adjustment Control Voltage Range (Vc) Frequency Pull Range Frequency Pull Slope Control Voltage Port Impedance Center Control Voltage Reference Voltage (Vdd=3.3V) Reference Voltage (Vdd=5.0V) Storage Temperature 10 (Vdd/2) -0.5 0. 0 ±0.70 Positive Vdd Volts ppm Control Voltage Port Impedance Center Control Voltage Output @ Pin#5 Output @ Pin#5 kΩ Vdd/2 2.80 4.50 (Vdd/2) +0.5 2.90 4.60 +100 Volts Volts Volts ºC 2.70 4.40 -40 OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY2 - - MHz - - Supply Voltage Option Blank 3.30V A 5.00 V Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz Temperat u re Options E -20°C to +70°C F -40°C to +75°C RF Output Option s Blank CMO S SW Sinewave ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C ABRACON IS ABRACON IS ISO9001:2008 CE R TIFIED CE R TIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY2 Series OUTLINE DIMENSIONS 21.00 mm Max. Pb RoHS Compliant 21.0 x 21.0 x 11.0 mm ||||||||||||||| (20) PACKAGING: units per tray REFLOW PROFILE: TS max to TL (Ramp-up Rate) Preheat Temperature Min. (TS Min.) Temperature Typical (T S Typ.) Temperature Max. (TS Max.) Time (tS) Ramp-up rate (TL to Tp ) Time Maintained Above: --Temperature (TL)/Time (TL) Peak Temperature (Tp) Target Peak Temperature (Tp Target) Time within 5°C of actual peak (tp) Ramp-down Rate Tune 25°C to Peak Temperature (t) 3°C/second max. 150°C 175°C 200°C 60 ~ 180 seconds 3°C/second max. 217°C/60 ~ 150 seconds 250°C max. for 10 seconds 250°C +0/-5°C 20 ~ 40 seconds 6°C/second max. 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ABRACON IS ISO9001:2008 CE R TIFIED CE R TIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com