JANTX2N3772

TECHNICAL DATA NPN HIGH POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/518 Devices Qualified Level 2N3771 JANTX JANTXV 2N3772 MAXIMUM RATINGS Ratings Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Base Current Collector Current Total Power Dissipation @ TA = +250C (1) @ TC = +250C (2) Operating & Storage Junction Temperature Range Symbol 2N3771 2N3772 Unit VCEO VCBO VEBO IB IC 40 50 7.0 7.5 30 60 100 7.0 5.0 20 Vdc Vdc Vdc Adc Adc W W 0 C PT TJ, Tstg 6.0 150 -65 to +200 TO-3* (TO-204AA) 1) Derate linearly 34.2 mW/0C for TA > +250C 2) Derate linearly 857 mW/0C for TC > +250C *See Appendix A for Package Outline ELECTRICAL CHARACTERISTICS (TA = 250C unless otherwise noted) Characteristics Symbol Min. Max. Unit 2N3771 2N3772 V(BR)CEO 40 60 Vdc 2N3771 2N3772 V(BR)CER 45 70 Vdc 2N3771 2N3772 V(BR)CEX 50 90 Vdc 2N3771 2N3772 ICEO 5.0 5.0 mAdc 2N3771 2N3772 IEBO 2.0 mAdc 2N3771 2N3772 ICEX 500 500 µAdc OFF CHARACTERISTICS Collector-Base Breakdown Voltage IC = 200 mAdc Collector-Emitter Breakdown Voltage IC = 200 mAdc, RBE = 100 Ω Collector-Emitter Breakdown Voltage IC = 200 mAdc, VBE = -1.5 Vdc Collector-Emitter Cutoff Current VCE = 30 Vdc VCE = 50 Vdc Emitter-Base Cutoff Current VBE = 7.0 Vdc Collector-Emitter Cutoff Current VBE = 1.5 Vdc, VCE = 50 Vdc VBE = 1.5 Vdc, VCE = 100 Vdc 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 120101 Page 1 of 2 2N3771, 2N3772 JAN SERIES ELECTRICAL CHARACTERISTICS (con’t) Characteristics Symbol Min. Max. 15 15 40 60 60 - Unit ON CHARACTERISTICS (3) Forward-Current Transfer Ratio IC = 15 Adc, VCE = 4.0 Vdc IC = 10 Adc, VCE = 4.0 Vdc IC = 1.0 Adc, VCE = 4.0 Vdc Collector-Emitter Saturation Voltage IC = 15 Adc, IB = 1.5 Adc IC = 30 Adc, IB = 6.0 Adc IC = 10 Adc, IB = 1.0 Adc IC = 20 Adc, IB = 4.0 Adc Base-Emitter Voltage (non-saturated) IC = 15 Adc, VCE = 4.0 Vdc IC = 10 Adc, VCE = 4.0 Vdc hFE 2N3771 2N3772 Both VCE(sat) 1.5 4.0 1.2 4.0 2N3771 2N3771 2N3772 2N3772 Vdc VBE 2.3 2.0 2N3771 2N3772 Vdc DYNAMIC CHARACTERISTICS Small-Signal Cutoff Frequency IC = 1.0 Adc, VCE = 10 Vdc, f = 1.0 kHz Magnitude of Common Emitter Small-Signal Short-Circuit Forward-Current Transfer IC = 1.0 Adc, VCE = 4.0 Vdc, f = 100 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz hfe hfe 40 6.0 30 1200 pƒ on 10 8.0 µs off 12 10 µs Cobo SWITCHING CHARACTERISTICS Turn-On Time VCC = 30 Vdc; IC = 15 Adc; IB1= 1.5 Adc VCC = 30 Vdc; IC = 10 Adc; IB1= 1.0 Adc Turn-Off Time VCC = 30 Vdc; IC = 15 Adc; IB1 =1.5 Adc; IB2 = -1.5 Adc VCC = 30 Vdc; IC = 10 Adc; IB1 = 1.0 Adc; IB2 = -1.0 Adc 2N3771 2N3772 t 2N3771 2N3772 t SAFE OPERATING AREA DC Tests TC = +250C, 1 Cycle, t = 1.0 s Test 1 (2N3771 only) VCE = 5.0 Vdc, IC = 30 Adc Test 2 (2N3771 only) VCE = 40 Vdc, IC = 3.75 Adc Test 3 (2N3772 only) VCE = 7.5 Vdc, IC = 20 Adc Test 4 (2N3772 only) VCE = 60 Vdc, IC = 2.5 Adc Clamped Inductive TA = +250C; duty cycle ≤ 10%; RS = 0.1 Ω Test 1 (2N3771 only) RBB1 = 2.0 Ω; VBB1 ≤ 14 Vdc; RBB2 = 100 Ω; VCC = 20±5.0 Vdc; VBB2 = 1.5 Vdc; IC = 30 Adc; RL ≤ 0.67 Ω; L= 5.0 mH Test 2 (2N3772 only) RBB1 = 2.0 Ω; VBB1 ≤ 10 Vdc; RBB2 = 100 Ω; VCC = 40±5.0 Vdc; VBB2 = 1.5 Vdc; IC = 20 Adc; RL ≤ 2.0 Ω; L= 5.0 mH (3) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%. 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 120101 Page 2 of 2