VSC3340-01
6.5 Gbps 40 × 40 Crosspoint Switch with Low-Power Green Modes
Microsemi’s multichannel 6.5 Gbps crosspoint switch provides a costeffective solution for high-speed copper interconnects.
Highlights
The VSC3340-01 is an advanced signal conditioning crosspoint switch
solution uniquely capable of addressing a wide array of asynchronous,
physical layer switching and routing applications across storage, server,
video, communications and other industries. Featuring a 40 × 40 nonblocking, multicasting switch core with ports running at any rate up to
6.5 Gbps, the VSC3340-01 architecture provides protocol-transparent
operation, allowing each channel to run independently and optimize low
power operation when running at lower speeds. VSC3340-01 supports
virtually all standard and proprietary data protocols up to the maximum
data rate.
• 40 × 40 fully non-blocking switch capability
• DC to 6.5 Gbps operation
• Protocol-independent operation
• Advanced input equalization and output preemphasis
• Low power green modes
• Small 23 mm × 23 mm form factor
Applications
• HDMI/DVI/DisplayPort switching/routing
The device incorporates Microsemi’s fourth-generation input equalization
and pre-emphasis I/O capability engineered to overcome channel
impairments experienced in today’s high-density systems at multigigabit data rates. It can perform signal fanout, loopback, and protection
switching. It can also regenerate signals compromised by losses in the
transmission medium. Microsemi’s equalization provides highly effective
compensation for deterministic jitter across a wide range of high-speed
interconnect applications.
• Broadcast video switching/routing
• PCIe repeater applications
• Servers
• Storage
• Telecom
VSC3340-01 Line Card and Central Switch Card Application
Line Card
Module
Serial DC to
6.5 Gbps
PHY
ASIC or
FPGA
40
Serial DC to
6.5 Gbps
VSC3340-01
40
Backplane
Switch Card
VSC3340-01
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone
and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability
of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.
Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in
this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
VSC3340-01
6.5 Gbps 40 × 40 Crosspoint Switch with Low-Power Green Modes
Speed and Protocol Support
Key Specifications
• 6.5 Gbps non-return-to-zero (NRZ) data bandwidth
• 6.5 Gbps NRZ per channel data rate
• Protocol-independent low power green modes when used at
lower data rates
• 2.5 V power supply
Architecture
Related Products
• Fully non-blocking and multicasting switch core
• Loss of signal (LOS) detection and forwarding (supports out-ofband signaling)
• Fully asynchronous operation with
很抱歉,暂时无法提供与“VSC3340YJJ-01”相匹配的价格&库存,您可以联系我们找货
免费人工找货