VSC8115XYA-06-T

VSC8115-05, VSC8115-06 155 Mbps and 622 Mbps Clock and Data Recovery Units Microsemi’s newly improved multirate clock and data recovery (CDR) devices provide exceptional input sensitivity, jitter tolerance, and jitter transfer performance. Applications The VSC8115-05 and VSC8115-06 devices derive high-speed timing signals for SONET/SDH-based equipment. The devices are designed to operate with SONET framer or ASIC devices to provide a low-power, high-speed clock and data recovery interface for optical networks. • Multiservice access platforms and add/ drop multiplexers The devices achieve impressive jitter tolerance of 0.45 UI, jitter input sensitivity of 150 mV, and jitter transfer compliance in JMODE. Meets all Telcordia, ANSI, ITU-T, and SONET jitter requirements. • Optical test equipment The VSC8115-05 and VSC8115-06 feature signal and lock-detect status outputs, automatic lock-to-reference, and PLL bypass for onboard debugging. High-speed outputs are configurable for either LVPECL or LVDS. • Superior jitter tolerance and transfer jitter performance • SONET/SDH and DWDM transport systems • ATM switches and routers • Digital cross-connect systems Highlights • Low power dissipation Available in a 20-pin TSSOP package for flexible implementation and simplified layout, the VSC8115-05 device supports commercial temperature ranges, and the VSC8115-06 supports industrial temperature ranges. Both devices come in tape and reel form and are available in lead(Pb)-free versions. • Single CDR unit for both 155 Mbps and 622 Mbps applications VSC8115-05 VSC8115-06 Divider STS12 CAP VCO BYPASS DATAIN ± SD 2 Phase/ Loop Filter Frequency Detector 2 LOCKDET DATAOUT ± LOCKREFN 0 REFCLK 1 2 CLKOUT ± Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. VSC8115-05, VSC8115-06 155 Mbps and 622 Mbps Clock and Data Recovery Units Features Key Specifications • • • • • • • • • Automatic lock-to-reference Signal and lock-detect status outputs PLL bypass for on-board debugging High-speed LVPECL or LVDS outputs Requirements 3.3 V power supply 155 mW typical power dissipation Commercial temperature range: 0°C to 85°C Industrial temperature range: –40°C to 95°C 20-pin, 4.4 mm × 6.5 mm TSSOP package Related Products • Telcordia, ANSI, ITU-T G.783, and G.825 SDH • GR-253 CORE and GR-253 ILR SONET • T1.105.03-2002 SONET Visit www.microsemi.com for information about other related products. OC-3 Jitter Tolerance Minimum Specifications OC-12 Jitter Tolerance Minimum Specifications 100 10 10 1 VSC8115-05 and VSC8115-06 Typical Performance Jitter (UIp-p) Input Jitter Amplitude (UIpp) 100 1 VSC8115-05 and VSC8115-06 Typical Performance Telec ordia Requirements 0.1 Telec ordia Requirements 0.1 0.01 0.01 1 10 100 1K 10K 100K Jitter Frequency (Hz) Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com 1M 10M 1 10 100 1K 10K 100K 1M 10M Jitter Frequency (Hz) Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense and security, aerospace, and industrial markets. Products include high-performance and radiationhardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and synchronization devices and precise time solutions; voice processing devices; RF solutions; discrete components; enterprise storage and communications solutions, security technologies, and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. ©2008–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. VPPD-02210. 1.0. 4/16 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip: VSC8115XYA-06-T VSC8115XYA-05-T