VSC8491YJU-13

VSC8491 WAN/LAN/Backplane RXAUI/XAUI to SFP+/KR 10 GbE SerDes PHY with VeriTime™ and MACsec Microsemi’s 10G/1G SerDes PHY provides MACsec, IEEE 1588v2, and hardware-based KR support for timing-critical applications, including all industry-standard protocol encapsulations. Highlights • IEEE 1588v2 compliant • 128/256-bit MACsec support The VSC8491 device offers a seamless integration between IEEE 1588v2 • RXAUI/XAUI support and the MACsec engine with no loss of precision. It also includes one serial port routed to one or both of the RXAUI/XAUI interfaces using the integrated • SFP+ I/O with KR support • 1 GbE support crosspoint. VeriTime™ is Microsemi's patent-pending timing technology that delivers the industry’s most accurate IEEE 1588v2 timing implementation. IEEE 1588v2 timing integrated in the PHY is the quickest, lowest cost method of implementing the timing accuracy that is critical to maintaining existing timing-critical capabilities during the migration from TDM to packet-based architectures. Applications The VSC8491 device supports 1-step and 2-step PTP frames for ordinary clock, boundary clock, and transparent clock applications, along with complete Y.1731 OAM performance monitoring capabilities. • Carrier Ethernet networks requiring IEEE 1588v2 timing MACsec (IEEE 802.1AE) defines a set of protocols to meet the security requirements for protecting data traversing Ethernet LANs, such as input classification, frame encryption/decryption, and performance and latency monitoring. • Multiple-port RXAUI/XAUI to • SFI/ SFP+ line cards or NICs • 10GBASE-KR compliant backplane transceivers • Secure data center-to-data center interconnects • 10 GbE switch cards, router cards, and NICs The VSC8491 device meets the SFP+ SR/LR/ER/ZR/220MMF host requirements in accordance with the SFF-8431 specifications. It also compensates for optical impairments in SFP+ applications, along with degradations of the PCB. The VSC8491 device provides full KR support, including KR state machine, for autonegotiation and link optimization. The transmit path incorporates a multitap output driver to provide flexibility to meet the demanding 10GBASE-KR (IEEE 802.3ap) Tx output launch requirements. 10 GbE A complete suite of BIST functionality includes line and client loopbacks along with pattern generation and error detection. Highly flexible clocking options support LAN and WAN operation using single 156.25 MHz reference clock rate inputs for seamless Synchronous Ethernet support. The VSC8491 device includes a failover switching capability for protection routing, along with selectable lane ordering. 10 GbE Line Card or NIC RXAUI/XAUI Dual 10 GbE MAC/NIC 2/4 VSC8491 Switch Module 1 × 10G 1 × 1G VSC8491 Module 1 × 10G/ 1 × 1G 2/4 2/4 2/4 RXAUI/ XAUI Switch RXAUI/ XAUI 10GBASE-KR Backplane Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. VSC8491 WAN/LAN/Backplane RXAUI/XAUI to SFP+/KR 10 GbE SerDes PHY with VeriTime™ and MACsec Range of Support Flexibility • IEEE 1588v2/Y.1731 OAM precision timing support to within 4 ns accuracy at 1.25 Gbps and 10.3 Gbps • Compliant to IEEE 802.1AE specifications for 128/256-bit MACsec support • Compliant to IEEE 802.3ae and SFF-8431 electrical (SFI) specifications • 9.95 Gbps WAN and 10.3 Gbps LAN operation, as well as 1.25 Gbps Ethernet support • Supports all standard SFP+ applications • Support for 10GBASE-KR (IEEE 802.3ap) for 10G backplanes, including 1.25 Gbps and 10.3 Gbps auto-negotiation • Adaptive equalization receiver and programmable, multitap transmitter pre-emphasis • Synchronous Ethernet support • MDIO/SPI and two-wire serial slave management interfaces • • • • Key Specifications • 1.15 W typical for each bidirectional channel • 1.2 V and 1.0 V core power supplies (2.5 V TTL supply) PLL Failover switching and lane ordering VScope input signal monitoring integrated circuit Host-side and line-side loopbacks with BIST functions I/O programmability for lane swap, invert, amplitude, slew, preemphasis, and equalization • Optional forward error correction (FEC) • Flexible clocking options enable Layer 1 support for Synchronous Ethernet • Passive copper cable support for minimum transmission cost Related Products Visit www.microsemi.com for information about these related products: • VSC8487-15 • VSC8488-15 • VSC8489 • VSC8490 • VSC8572/VSC8574 • VSC8584 Clocking Network for Timing and Retiming (including SyncE support) PLL PCS RXAUI XAUI 1 GbE SERDES MUX 2× 2× 6.25 G 2× 4× 3.125 G 2× 1× 1.25 G XGXS SERDES PCS WIS 1× 10 G 1× 1 G Line Host/Client FIFO SFP+ KR 1GbE FIFO MUX RXAUI XAUI 1 GbE SPI/MDIO/ Two-Wire Serial PCS SPI Slave Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com MDIO Slave Two-Wire Serial Slave Configuration and Status Registers Two-Wire Serial Master Two-Wire Serial Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense and security, aerospace, and industrial markets. Products include high-performance and radiationhardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and synchronization devices and precise time solutions; voice processing devices; RF solutions; discrete components; enterprise storage and communications solutions, security technologies, and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. ©2012–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. VPPD-02991. 1.0. 4/16