AD5821A

120 mA, Current Sinking, 10-Bit, I2C DAC AD5821A FEATURES Current sink: 120 mA Available in 3 × 3 array WLCSP package 2-wire, (I2C-compatible) 1.8 V serial interface 10-bit resolution Integrated current sense resistor Power supply range: 2.7 V to 5.5 V Guaranteed monotonic over all codes Power down to 0.5 μA typical Internal reference Ultralow noise preamplifier Power-down function Power-on reset Industrial Heater controls Fan controls Cooler (Peltier) controls Solenoid controls Valve controls Linear actuator controls Light controls Current loop controls GENERAL DESCRIPTION The AD5821A is a single, 10-bit digital-to-analog converter (DAC) with output current sinking capability of 120 mA. It features an internal reference and operates from a single 2.7 V to 5.5 V supply. The DAC is controlled via a 2-wire, I2C®compatible serial interface that operates at clock rates up to 400 kHz. The AD5821A incorporates a power-on reset circuit that ensures the DAC output powers up to 0 V and remains there until a valid write takes place. It has a power-down feature that reduces the current consumption of the device to 1 μA maximum. The AD5821A is designed for autofocus, image stabilization, and optical zoom applications in camera phones, digital still cameras, and camcorders. The AD5821A is also suitable for many industrial applications, such as controlling temperature, light, and movement without derating over temperatures ranging from −30°C to +85°C. The I2C 7-bit address for the AD5821A is 0xC. APPLICATIONS Consumer Lens autofocus Image stabilization Optical zoom Shutters Iris/exposure Neutral density (ND) filters Lens covers Camera phones Digital still cameras Camera modules Digital video cameras/camcorders Camera-enabled devices Security cameras Web/PC cameras FUNCTIONAL BLOCK DIAGRAM XSHUTDOWN REFERENCE POWER-ON RESET SDA SCL I2C SERIAL INTERFACE 10-BIT CURRENT OUTPUT DAC VDD D1 ISINK VDD DGND R AD5821A DGND RSENSE 3.3Ω 07796-001 AGND Figure 1. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2008 Analog Devices, Inc. All rights reserved. AD5821A TABLE OF CONTENTS Features .............................................................................................. 1  Consumer Applications ................................................................... 1  Industrial Applications .................................................................... 1  General Description ......................................................................... 1  Functional Block Diagram .............................................................. 1  Revision History ............................................................................... 2  Specifications..................................................................................... 3  AC Specifications.......................................................................... 4  Timing Specifications .................................................................. 4  Absolute Maximum Ratings............................................................ 5 Pin Configuration and Function Descriptions ............................. 6  Typical Performance Characteristics ..............................................7  Terminology .................................................................................... 10  Theory of Operation ...................................................................... 11  Serial Interface ............................................................................ 11  I2C Bus Operation ...................................................................... 11  Data Format ................................................................................ 11  Power Supply Bypassing and Grounding ................................ 12  Applications Information .............................................................. 14  Outline Dimensions ....................................................................... 15  Ordering Guide .......................................................................... 15  REVISION HISTORY 10/08—Revision 0: Initial Version Rev. 0 | Page 2 of 16 AD5821A SPECIFICATIONS VDD = 2.7 V to 5.5 V, AGND = DGND = 0 V, load resistance (RL) = 25 Ω connected to VDD. All specifications TMIN to TMAX, unless otherwise noted. Table 1. Parameter DC PERFORMANCE Resolution Relative Accuracy 2 Differential Nonlinearity2, 3 Zero-Code Error2, 4 Offset Error @ Code 162 Gain Error2 Offset Error Drift4, 5 Gain Error Drift2, 5 OUTPUT CHARACTERISTICS Minimum Sink Current4 Maximum Sink Current Output Current During XSHUTDOWN5 Output Compliance5 Output Compliance5 Power-Up Time5 LOGIC INPUTS (XSHUTDOWN)5 Input Current Input Low Voltage, VINL Input High Voltage, VINH Pin Capacitance LOGIC INPUTS (SCL, SDA)5 Input Low Voltage, VINL Input High Voltage, VINH Input Low Voltage, VINL Input High Voltage, VINH Input Leakage Current, IIN Input Hysteresis, VHYST Digital Input Capacitance, CIN Glitch Rejection 6 POWER REQUIREMENTS VDD IDD (Normal Mode) IDD (Power-Down Mode) 7 1 2 3 Min B Version 1 Typ Max Unit 10 ±1.5 0 0.5 0.5 10 ±0.2 3 120 80 0.6 0.48 20 ±4 ±1 1 ±0.6 ±0.5 Bits LSB LSB mA mA % of FSR μA/°C LSB/°C mA mA nA V V μs Test Conditions/Comments VDD = 3.6 V to 4.5 V; device operates over 2.7 V to 5.5 V with reduced performance 117 μA/LSB Guaranteed monotonic over all codes All 0s loaded to DAC at 25°C VDD VDD XSHUTDOWN = 0 Output voltage range over which maximum 120 mA sink current is available Output voltage range over which 90 mA sink current is available To 10% of FS, coming out of power-down mode; VDD = 5 V ±1 0.54 1.26 3 −0.3 1.26 −0.3 1.4 0.05 VDD 6 50 2.7 0.5 0.5 5.5 1 +0.54 VDD + 0.3 +0.54 VDD + 0.3 ±1 μA V V pF V V V V μA V pF ns V mA μA VDD = 2.7 V to 5.5 V VDD = 2.7 V to 5.5 V VDD = 2.7 V to 3.6 V VDD = 2.7 V to 3.6 V VDD = 3.6 V to 5.5 V VDD = 3.6 V to 5.5 V VIN = 0 V to VDD Pulse width of spike suppressed IDD specification is valid for all DAC codes; VINH = 1.8 V, VINL = GND, VDD = 2.7 V to 3.6 V VINH = 1.8 V, VINL = GND, VDD = 3 V Temperature range for the B version is −30°C to +85°C. See the Terminology section. Linearity is tested using a reduced code range: Code 32 to Code 1023. 4 To achieve near zero output current, use the power-down feature. 5 Guaranteed by design and characterization; not production tested. XSHUTDOWN is active low. SDA and SCL pull-up resistors are tied to 1.8 V. 6 Input filtering on both the SCL and the SDA inputs suppress noise spikes that are less than 50 ns. 7 XSHUTDOWN is active low. Rev. 0 | Page 3 of 16 AD5821A AC SPECIFICATIONS VDD = 2.7 V to 5.5 V, AGND = DGND = 0 V, RL = 25 Ω connected to VDD, unless otherwise noted. Table 2. Parameter Output Current Settling Time Slew Rate Major Code Change Glitch Impulse Digital Feedthrough 3 1 2 B Version 1, 2 Min Typ Max 250 0.3 0.15 0.06 Unit μs mA/μs nA-sec nA-sec Test Conditions/Comments VDD = 3.6 V, RL = 25 Ω, LL = 680 μH, ¼ scale to ¾ scale change (0x100 to 0x300) 1 LSB change around major carry Temperature range for the B version is −40°C to +85°C. Guaranteed by design and characterization; not production tested. 3 See the Terminology section. TIMING SPECIFICATIONS VDD = 2.7 V to 3.6 V. All specifications TMIN to TMAX, unless otherwise noted. Table 3. Parameter 1 fSCL t1 t2 t3 t4 t5 t6 2 t7 t8 t9 t10 t11 B Version Limit at TMIN, TMAX 400 2.5 0.6 1.3 0.6 100 0.9 0 0.6 0.6 1.3 300 0 250 300 20 + 0.1 CB 3 400 Unit kHz max μs min μs min μs min μs min ns min μs max μs min μs min μs min μs min ns max ns min ns max ns max ns min pF max Description SCL clock frequency SCL cycle time tHIGH, SCL high time tLOW, SCL low time tHD, STA, start/repeated start condition hold time tSU, DAT, data setup time tHD, DAT, data hold time tSU, STA, setup time for repeated start tSU, STO, stop condition setup time tBUF, bus free time between a stop condition and a start condition tR, rise time of both SCL and SDA when receiving Can be CMOS driven tF, fall time of SDA when receiving tF, fall time of both SCL and SDA when transmitting Capacitive load for each bus line CB 1 Guaranteed by design and characterization; not production tested. 2 A master device must provide a hold time of at least 300 ns for the SDA signal (referred to the VINH MIN of the SCL signal) to bridge the undefined region of the SCL falling edge. 3 CB is the total capacitance of one bus line in pF. tR and tF are measured between 0.3 VDD and 0.7 VDD. Timing Diagram SDA t9 t3 t10 t11 t4 SCL t4 START CONDITION t6 t2 t5 t7 REPEATED START CONDITION t1 t8 STOP CONDITION 07796-002 Figure 2. 2-Wire Serial Interface Timing Diagram Rev. 0 | Page 4 of 16 AD5821A ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 4. Parameter VDD to AGND VDD to DGND AGND to DGND SCL, SDA to DGND XSHUTDOWN to DGND ISINK to AGND Operating Temperature Range Industrial (B Version) Storage Temperature Range Junction Temperature (TJ MAX) WLCSP Power Dissipation θJA Thermal Impedance 1 Mounted on 4-Layer Board Lead Temperature, Soldering Maximum Peak Reflow Temperature 2 1 Rating −0.3 V to +5.5 V −0.3 V to VDD + 0.3 V −0.3 V to +0.3 V −0.3 V to VDD + 0.3 V −0.3 V to VDD + 0.3 V −0.3 V to VDD + 0.3 V −30°C to +85°C −65°C to +150°C 150°C (TJ MAX − TA)/θJA 95°C/W 260°C (±5°C) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION To achieve the optimum θJA, it is recommended that the AD5821A be soldered on a 4-layer board. 2 As per JEDEC J-STD-020C. Rev. 0 | Page 5 of 16 AD5821A PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 3 2 1 A B C VIEW FROM BALL SIDE 07796-021 Figure 3. Pin Configuration Table 5. Pin Function Descriptions Pin Number A1 A2 A3 B1 B2 B3 C1 C2 C3 Mnemonic ISINK NC XSHUTDOWN AGND DGND SDA DGND VDD SCL Description Output Current Sink. No Connection. Power-Down. Asynchronous power-down signal, active low. Analog Ground Pin. Digital Ground Pin. I2C Interface Signal. Digital Ground Pin. Digital Supply Voltage. I2C Interface Signal. 1515µm NC ISINK XSHUTDOWN DGND AGND 1690µm SDA VDD Figure 4. Metallization Photo Dimensions shown in microns (μm) Rev. 0 | Page 6 of 16 07796-023 SCL DGND AD5821A TYPICAL PERFORMANCE CHARACTERISTICS 2.0 INL VDD = 3.8V TEMP = 25°C 1.5 VERT = 50µs/DIV INL (LSB) 1.0 0.5 3 0 07796-007 HORIZ = 468µA/DIV 0 56 112 168 224 280 336 392 448 504 560 616 672 728 784 840 896 952 1008 1023 –0.5 CODE Figure 5. Typical INL vs. Code Plot 0.6 0.5 0.4 0.3 07796-004 CH3 M50.0µs Figure 8. Settling Time for a 4-LSB Step (VDD = 3.6 V) DNL VDD = 3.8V TEMP = 25°C VERT = 2µA/DIV 4.8µA p-p DNL (LSB) 0.2 0.1 0 –0.1 1 HORIZ = 2s/DIV 0 56 112 168 224 280 336 392 448 504 560 616 672 728 784 840 896 952 1008 1023 –0.3 CODE 07796-005 CH1 M2.0s Figure 6. Typical DNL vs. Code Plot 92.0 91.5 91.0 90.5 90.0 89.5 89.0 88.5 07796-006 Figure 9. 0.1 Hz to 10 Hz Noise Plot (VDD = 3.6 V) 0.14 IOUT @ +25°C 0.12 IOUT @ –40°C 0.10 0.08 0.06 0.04 0.02 0 IOUT @ +85°C OUTPUT CURRENT (mA) TIME CODE Figure 7. ¼ to ¾ Scale Settling Time (VDD = 3.6 V) Figure 10. Sink Current vs. Code vs. Temperature (VDD = 3.6 V) Rev. 0 | Page 7 of 16 07796-009 112 168 224 280 336 392 448 504 560 616 672 728 784 840 896 952 1008 1023 88.0 53.5–6 100.0 –6 150.0–6 200.0–6 250.0–6 300.0 –6 333.1–6 IOUT (A) 0 56 07796-008 –0.2 AD5821A 2000 1800 1600 1400 0.45 VDD = 3.6V 0.40 0.35 ZERO-CODE ERROR (mA) ACPSRR (µA/V) 0.30 0.25 0.20 0.15 0.10 0.05 1200 1000 800 600 400 200 07796-010 VDD = 4.5V VDD = 3.8V 100 1k FREQUENCY (Hz) 10k 100k –40 –30 –20 –10 0 15 25 35 45 55 65 75 85 TEMPERATURE (°C) Figure 11. AC Power Supply Rejection Ratio (VDD = 3.6 V) 3.5 3.0 POSITIVE INL (VDD = 3.8V) 2.5 2.0 POSITIVE INL (VDD = 4.5V) Figure 14. Zero-Code Error vs. Temperature vs. Supply Voltage 1.5 VDD = 4.5V 1.0 FULL-SCALE ERROR (mA) 0.5 VDD = 3.8V 0 –0.5 –1.0 –1.5 INL (LSB) 1.5 1.0 0.5 0 –0.5 07796-011 POSITIVE INL (VDD = 3.6V) NEGATIVE INL (VDD = 3.6V) NEGATIVE INL (VDD = 3.8V) VDD = 3.6V –40 –30 –20 –10 0 15 25 35 45 55 65 75 85 07796-014 07796-024 –1.0 NEGATIVE INL (VDD = 4.5V) –40 –30 –20 –10 0 15 25 35 45 55 65 75 85 TEMPERATURE (°C) –2.0 TEMPERATURE (°C) Figure 12. INL vs. Temperature vs. Supply Voltage 1.0 0.8 0.6 0.4 POSITIVE DNL (VDD = 3.6V) POSITIVE DNL (VDD = 4.5V) Figure 15. Full-Scale Error vs. Temperature vs. Supply Voltage 1.4 1.3 VDD = 5.5V 1.2 1.1 VDD = 4.5V VDD = 3.6V VDD = 2.7V 0 –0.2 –0.4 –0.6 –0.8 –1.0 NEGATIVE DNL (VDD = 3.8V) VOLTAGE (V) DNL (LSB) 0.2 POSITIVE DNL (VDD = 3.8V) 1.0 0.9 0.8 0.7 NEGATIVE DNL (VDD = 4.5V) NEGATIVE DNL (VDD = 3.6V) 07796-012 0.6 0.5 55 65 75 85 0.4 –50 –30 –10 10 30 50 70 90 –40 –30 –20 –10 0 15 25 35 45 TEMPERATURE (°C) TEMPERATURE (°C) Figure 13. DNL vs. Temperature vs. Supply Voltage Figure 16. SCL and SDA Logic High Level (VINH) vs. Temperature and Supply Voltage Rev. 0 | Page 8 of 16 07796-013 0 10 0 AD5821A 1.4 1.3 1.2 1.1 VOLTAGE (V) VOLTAGE (V) 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 VDD = 2.7V 0.6 0.5 –30 –10 10 30 50 70 90 07796-026 1.0 0.9 0.8 0.7 0.6 0.5 0.4 –50 VDD = 3.6V VDD = 5.5V VDD = 4.5V VDD = 5.5V VDD = 4.5V VDD = 3.6V VDD = 2.7V –30 –10 10 30 50 70 90 TEMPERATURE (°C) TEMPERATURE (°C) Figure 17. SCL and SDA Logic Low Level (VINL) vs. Temperature and Supply Voltage 1.4 1.3 1.2 1.1 VOLTAGE (V) Figure 19. DNL vs. XSHUTDOWN Logic Low Level (VINL) vs. Temperature and Supply Voltage VDD = 5.5V VDD = 4.5V VDD = 3.6V VDD = 2.7V 1.0 0.9 0.8 0.7 0.6 0.5 –30 –10 10 30 50 70 90 07796-025 0.4 –50 TEMPERATURE (°C) Figure 18. XSHUTDOWN Logic High Level (VINH) vs. Temperature and Supply Voltage Rev. 0 | Page 9 of 16 07796-027 0.4 –50 AD5821A TERMINOLOGY Relative Accuracy For the DAC, relative accuracy or integral nonlinearity (INL) is a measurement of the maximum deviation, in LSB, from a straight line passing through the endpoints of the DAC transfer function. A typical INL vs. code plot is shown in Figure 5. Differential Nonlinearity (DNL) Differential nonlinearity is the difference between the measured change and the ideal 1 LSB change between any two adjacent codes. A specified differential nonlinearity of ±1 LSB maximum ensures monotonicity. This DAC is guaranteed monotonic by design. A typical DNL vs. code plot is shown in Figure 6. Zero-Code Error Zero-code error is a measurement of the output error when zero code (0x0000) is loaded to the DAC register. Ideally, the output is 0 mA. The zero-code error is always positive in the AD5821A because the output of the DAC cannot go below 0 mA. This is due to a combination of the offset errors in the DAC and output amplifier. Zero-code error is expressed in milliamperes (mA). Gain Error Gain error is a measurement of the span error of the DAC. It is the deviation in slope of the DAC transfer characteristic from the ideal, expressed as a percent of the full-scale range. Gain Error Drift Gain error drift is a measurement of the change in gain error with changes in temperature. It is expressed in LSB/°C. Digital-to-Analog Glitch Impulse This is the impulse injected into the analog output when the input code in the DAC register changes state. It is normally specified as the area of the glitch in nanoampere seconds (nA-sec) and is measured when the digital input code is changed by 1 LSB at the major carry transition. Digital Feedthrough Digital feedthrough is a measurement of the impulse injected into the analog output of the DAC from the digital inputs of the DAC, but it is measured when the DAC output is not updated. It is specified in nanoampere seconds (nA-sec) and measured with a full-scale code change on the data bus, that is, from all 0s to all 1s and vice versa. Offset Error Offset error is a measurement of the difference between ISINK (actual) and IOUT (ideal) in the linear region of the transfer function, expressed in milliamperes (mA). Offset error is measured on the AD5821A with Code 16 loaded into the DAC register. Offset Error Drift Offset error drift is a measurement of the change in offset error with a change in temperature. It is expressed in microvolts per degree Celsius (μV/°C). Rev. 0 | Page 10 of 16 AD5821A THEORY OF OPERATION The AD5821A is a fully integrated, 10-bit DAC with 120 mA output current sink capability. It is intended for driving voice coil actuators in applications such as lens autofocus, image stabilization, and optical zoom. The circuit diagram is shown in Figure 20. A 10-bit current output DAC coupled with Resistor R generates the voltage that drives the noninverting input of the operational amplifier. This voltage also appears across the RSENSE resistor and generates the sink current required to drive the voice coil. Resistor R and Resistor RSENSE are interleaved and matched. Therefore, the temperature coefficient and any nonlinearities over temperature are matched, and the output drift over temperature is minimized. Diode D1 is an output protection diode. XSHUTDOWN REFERENCE POWER-ON RESET SDA SCL I2C SERIAL INTERFACE 10-BIT CURRENT OUTPUT DAC VDD D1 ISINK VDD DGND When the bus is idle, SCL and SDA are both high. The master device initiates a serial bus operation by generating a start condition, which is defined as a high-to-low transition on the SDA low while SCL is high. The slave device connected to the bus responds to the start condition and shifts in the next eight data bits under control of the serial clock. These eight data bits consist of a 7-bit address, plus a read/write (R/W) bit that is 0 if data is to be written to a device, and 1 if data is to be read from a device. Each slave device on an I2C bus must have a unique address. The address of the AD5821A is 0001100; however, 0001101, 0001110, and 0001111 address the part because the last two bits are unused/don’t cares (see Figure 22 and Figure 23). Because the address plus the R/W bit always equals eight bits of data, the write address of the AD5821A is 00011000 (0x18) and the read address is 00011001 (0x19) (see Figure 22 and Figure 23). At the end of the address data, after the R/W bit, the slave device that recognizes its own address responds by generating an acknowledge (ACK) condition. This is defined as the slave device pulling SDA low while SCL is low before the ninth clock pulse and keeping it low during the ninth clock pulse. Upon receiving the ACK, the master device can clock data into the AD5821A in a write operation, or it can clock it out in a read operation. Data must change either during the low period of the clock (because SDA transitions during the high period define a start condition), or during a stop condition, as described in the Data Format section. I2C data is divided into blocks of eight bits, and the slave generates an ACK at the end of each block. Because the AD5821A requires 10 bits of data, two data-words must be written to it when a write operation occurs, or read from it when a read operation occurs. At the end of a read or write operation, the AD5821A acknowledges the second data byte. The master generates a stop condition, defined as a low-to-high transition on SDA while SCL is high, to end the transaction. R AD5821A DGND RSENSE 3.3Ω 07796-020 AGND Figure 20. Block Diagram Showing Connection to Voice Coil SERIAL INTERFACE The AD5821A is controlled using the industry-standard I2C 2-wire serial protocol. Data can be written to or read from the DAC at data rates of up to 400 kHz. After a read operation, the contents of the input register are reset to all 0s. I2C BUS OPERATION An I2C bus operates with one or more master devices that generate the serial clock (SCL) and read and write data on the serial data line (SDA) to and from slave devices such as the AD5821A. On all devices on an I2C bus, the SDA pin is connected to the SDA line and the SCL pin connected to the SCL line of the master device. I2C devices can only pull the bus lines low; pulling high is achieved by pull-up resistors, RP. The value of RP depends on the data rate, bus capacitance, and the maximum load current that the I2C device can sink (3 mA for a standard device). 1.8V DATA FORMAT Data is written to the AD5821A high byte first, MSB first, and is shifted into the 16-bit input register. After all data is shifted in, data from the input register is transferred to the DAC register. Because the DAC requires only 10 bits of data, not all bits of the input register data are used. The MSB is reserved for an activehigh, software-controlled, power-down function. The data format is shown in Table 6. When referring to this table, note that Bit 14 is unused; Bit 13 to Bit 4 correspond to the DAC data bits, D9 to D0; and Bit 3 to Bit 0 are unused. During a read operation, data is read in the same bit order. RP RP SDA SCL I2C MASTER DEVICE I2C SLAVE DEVICE AD5821A I2C SLAVE DEVICE Figure 21. Typical I2C Bus Rev. 0 | Page 11 of 16 07796-016 AD5821A 1 SCL 9 1 1 9 SDA START BY MASTER 0 0 0 1 1 X X R/W PD X D9 D8 D7 D6 D5 D4 ACK BY AD5821A D3 D2 D1 D0 X X X X ACK BY STOP BY AD5821A MASTER ACK BY AD5821A FRAME 1 SERIAL BUS ADDRESS BYTE FRAME 2 MOST SIGNIFICANT DATA BYTE FRAME 3 LEAST SIGNIFICANT DATA BYTE Figure 22. Write Operation 1 SCL 9 1 1 9 SDA START BY MASTER 0 0 0 1 1 X X R/W PD X D9 D8 D7 D6 D5 D4 ACK BY AD5821A D3 D2 D1 D0 X X X X ACK BY STOP BY AD5821A MASTER FRAME 1 SERIAL BUS ADDRESS BYTE FRAME 2 MOST SIGNIFICANT DATA BYTE FRAME 3 LEAST SIGNIFICANT DATA BYTE Figure 23. Read Operation Table 6. Data Format Serial DataWords Serial Data Bits Input Register Function 1 Bit 15 SD7 R15 XSHUTDOWN1 Bit 14 SD6 R14 X High Byte Bit Bit Bit 13 12 11 SD5 SD4 SD3 R13 D9 R12 D8 R11 D7 Bit 10 SD2 R10 D6 Bit 9 SD1 R9 D5 Bit 8 SD0 R8 D4 Bit 7 SD7 R7 D3 Bit 6 SD6 R6 D2 Bit 5 SD5 R5 D1 Low Byte Bit Bit 4 3 SD4 SD3 R4 D0 R3 X Bit 2 SD2 R2 X VBATTERY Bit 1 SD1 R1 X Bit 0 SD0 R0 X XSHUTDOWN = soft power-down; X = unused/don’t care; and D9 to D0 = AC data. POWER SUPPLY BYPASSING AND GROUNDING When accuracy is important in an application, it is beneficial to consider power supply and ground return layout on the PCB. The PCB for the AD5821A should have separate analog and digital power supply sections. Where shared AGND and DGND is necessary, the connection of grounds should be made at only one point, as close as possible to the AD5821A. Pay special attention to the layout of the AGND return path and, and trace it between the voice coil motor and ISINK to minimize any series resistance. Figure 24 shows the output current sink of the AD5821A and illustrates the importance of reducing the effective series impedance of AGND and the trace resistance between the motor and ISINK. The voice coil is modeled using Inductor LC and Resistor RC. The current through the voice coil is effectively a dc current that results in a voltage drop, VCOIL, when the AD5821A is sinking current. The effect of any series inductance is minimal. VOICE COIL VDD LC RC VCOIL DGND AD5821A RT ISINK TRACE RESISTANCE SDA SCL XSHUTDOWN DGND RG LG RSENSE Q1 VDROP R AGND GROUND RETURN 07796-019 Figure 24. Effect of PCB Trace Resistance and Inductance Rev. 0 | Page 12 of 16 07796-018 ACK BY AD5821A 07796-017 AD5821A When sinking the maximum current of 120 mA, the maximum voltage drop allowed across RSENSE is 400 mV, and the minimum drain to source voltage of Q1 is 200 mV. This means that the AD5821A output has a compliance voltage of 600 mV. If VDROP falls below 600 mV, the output transistor, Q1, can no longer operate properly and ISINK may not be maintained as a constant. When sinking 90 mA, the maximum voltage drop allowed across RSENSE is 300 mV, and the minimum drain to source voltage of Q1 is 180 mV. This means that the AD5821A output has a compliance voltage of 480 mV. If VDROP falls below 480 mV, the output transistor, Q1, can no longer operate properly and ISINK may not be maintained as a constant. As ISINK decreases, the voltage required across the transistor, Q1, also decreases and, therefore, lower supplies can be used with the voice coil motor. As the current increases to 120 mA through the voice coil, VCOIL increases. VDROP decreases and eventually approaches the minimum specified compliance voltage of 600 mV (or 480 mV, if ISINK = 90 mA). The ground return path is modeled by the components RG and LG. The trace resistance between the voice coil and the AD5821A is modeled as RT. The inductive effects of LG influence RSENSE and RC equally, and because the current is maintained as a constant, it is not as critical as the purely resistive component of the ground return path. When the maximum sink current is flowing through the motor, the resistive elements, RT and RG, may have an impact on the voltage headroom of Q1 and could, in turn, limit the maximum value of RC because of voltage compliance. For example, if VBAT = 3.6 V RG = 0.5 Ω RT = 0.5 Ω ISINK = 120 mA VDROP = 600 mV (compliance voltage) Then the largest value of resistance of the voice coil, RC, is Using another example, if VBAT = 3.6 V RG = 0.5 Ω RT = 0.5 Ω ISINK = 90 mA VDROP = 480 mV (compliance voltage specification at 90 mA) Then the largest value of resistance of the voice coil, RC, is RC = VBAT − [VDROP + (I SINK × RT ) + (I SINK × RG )] = I SINK 3.6 V − [480 mV + 2 × (90 mA × 0.5 Ω)] 90 mA = 33.66 Ω For this reason, it is important to minimize any series impedance on both the ground return path and interconnect between the AD5821A and the motor. It is also important to note that for lower values of ISINK the compliance voltage of the output stage also decreases. This decrease allows the user to either use voice coil motors with high resistance values or decrease the power supply voltage on the voice coil motor. The compliance voltage decreases as the ISINK current decreases. The power supply of the AD5821A, or the regulator used to supply the AD5821A, should be decoupled. Best practice power supply decoupling recommends that the power supply be decoupled with a 10 μF capacitor. Ideally, this 10 μF capacitor should be of a tantalum bead type. However, if the power supply or regulator supply is well regulated and clean, such decoupling may not be required. The AD5821A should be decoupled locally with a 0.1 μF ceramic capacitor, and this 0.1 μF capacitor should be located as close as possible to the VDD pin. The 0.1 μF capacitor should be ceramic with a low effective series resistance and effective series inductance. The 0.1 μF capacitor provides a low impedance path to ground for high transient currents. The power supply line should have as large a trace as possible to provide a low impedance path and reduce glitch effects on the supply line. Clocks and other fast switching digital signals should be shielded from other parts of the board by digital ground. Avoid crossover of digital and analog signals, if possible. When traces cross on opposite sides of the board, they should run at right angles to each other to reduce feedthrough effects through the board. The best technique is to use a multilayer board with ground and power planes, where the component side of the board is dedicated to the ground plane only and the signal traces are placed on the solder side. However, this is not always possible with a 2-layer board. RC = VBAT − [VDROP + (I SINK × RT ) + (I SINK × RG )] = I SINK = 24 Ω 3.6 V − [600 mV + 2 × (120 mA × 0.5 Ω)] 120 mA Rev. 0 | Page 13 of 16 AD5821A APPLICATIONS INFORMATION The AD5821A is designed to drive both spring-preloaded and nonspring linear motors used in applications such as lens autofocus, image stabilization, or optical zoom. The operation principle of the spring-preloaded motor is that the lens position is controlled by the balancing of a voice coil and spring. Figure 25 shows the transfer curve of a typical spring-preloaded linear motor for autofocus. The key points of this transfer function are displacement or stroke, which is the actual distance the lens moves in millimeters (mm) and the current through the motor, measured in milliamps (mA). A start current is associated with spring-preloaded linear motors, which is a threshold current that must be exceeded for any displacement in the lens to occur. The start current is usually 20 mA or greater; the rated stroke or displacement is usually 0.25 mm to 0.4 mm; and the slope of the transfer curve is approximately 10 μm/mA or less. The AD5821A is designed to sink up to 120 mA, which is more than adequate for available commercial linear motors or voice coils. Another factor that makes the AD5821A the ideal solution for these applications is the monotonicity of the device, ensuring that lens positioning is repeatable for the application of a given digital word. VDD 0.1µF 6 2 Figure 26 shows a typical application circuit for the AD5821A. 0.5 0.4 STROKE (mm) 0.3 0.2 START CURRENT 0.1 10 20 30 40 50 60 70 80 90 100 110 120 SINK CURRENT (mA) Figure 25. Spring-Preloaded Voice Coil Stroke vs. Sink Current VCC VDD XSHUTDOWN RP RP 1 REFERENCE POWER-ON RESET VOICE COIL SDA SCL 3 4 I2C SERIAL INTERFACE 10-BIT CURRENT OUTPUT DAC D1 8 ISINK I2C MASTER DEVICE I2C SLAVE DEVICE 5 R RSENSE AD5821A 7 VDD 10µF + VCC 07796-028 0.1µF 10µF + Figure 26. Typical Application Circuit Rev. 0 | Page 14 of 16 07796-029 AD5821A OUTLINE DIMENSIONS 1.575 1.515 1.455 0.65 0.59 0.53 SEATING PLANE 0.35 0.32 0.29 3 2 1 A BALL 1 IDENTIFIER 1.750 1.690 1.630 B 0.50 BSC BALL PITCH TOP VIEW (BALL SIDE DOWN) C Figure 27. 9-Ball Wafer Level Chip Scale Package [WLCSP] (CB-9-1) Dimensions shown in millimeters ORDERING GUIDE Model AD5821ABCBZ-REEL7 1 AD5821ABCBZ-REEL1 AD5821A-WAFER AD5821AD-WAFER EVAL-AD5821AEBZ1 1 Temperature Range −30°C to +85°C −30°C to +85°C −40°C to +85°C −40°C to +85°C Package Description 9-Ball Wafer Level Chip Scale Package (WLCSP) 9-Ball Wafer Level Chip Scale Package (WLCSP) Bare Die Wafer Bare Die Wafer on Film Evaluation Board Package Option CB-9-1 CB-9-1 091306-B 0.28 0.24 0.20 BOTTOM VIEW (BALL SIDE UP) Branding 1X 1X Z = RoHS Compliant Part. Rev. 0 | Page 15 of 16 AD5821A NOTES Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. ©2008 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D07796-0-10/08(0) Rev. 0 | Page 16 of 16