Ultralow Offset Voltage
Dual Op Amp
AD708
Data Sheet
FEATURES
PIN CONFIGURATION
Very high dc precision
30 μV maximum offset voltage
0.3 μV/°C maximum offset voltage drift
0.35 μV p-p maximum voltage noise (0.1 Hz to 10 Hz)
5 million V/V minimum open-loop gain
130 dB minimum CMRR
120 dB minimum PSRR
Matching characteristics
30 μV maximum offset voltage match
0.3 μV/°C maximum offset voltage drift match
130 dB minimum CMRR match
Available in 8-lead narrow body, PDIP, and
hermetic CERDIP and CERDIP/883B packages
AD708
1
–IN A
2
+IN A
3
–VS
4
–
A
+
–
B
+
TOP VIEW
(Not to Scale)
8
+VS
7
OUTPUT B
6
–IN B
5
+IN B
05789-001
OUTPUT A
Figure 1. PDIP (N) and CERDIP (Q) Packages
GENERAL DESCRIPTION
The AD708 is a high precision, dual monolithic operational
amplifier. Each amplifier individually offers excellent dc
precision with maximum offset voltage and offset voltage drift
of any dual bipolar op amp.
The matching specifications are among the best available in any
dual op amp. In addition, the AD708 provides 5 V/μV minimum open-loop gain and guaranteed maximum input voltage
noise of 350 nV p-p (0.1 Hz to 10 Hz). All dc specifications
show excellent stability over temperature, with offset voltage
drift typically 0.1 μV/°C and input bias current drift of
25 pA/°C maximum.
The AD708 is available in four performance grades. The
AD708J is rated over the commercial temperature range of
0°C to 70°C and is available in a narrow body, PDIP. The
AD708A and AD708B are rated over the industrial temperature
range of −40°C to +85°C and are available in a CERDIP.
Rev. D
The AD708S is rated over the military temperature range of
−55°C to +125°C and is available in a CERDIP military version
processed to MIL-STD-883B.
PRODUCT HIGHLIGHTS
1.
The combination of outstanding matching and individual
specifications make the AD708 ideal for constructing high
gain, precision instrumentation amplifiers.
2.
The low offset voltage drift and low noise of the AD708
allow the designer to amplify very small signals without
sacrificing overall system performance.
3.
The AD708 10 V/µV typical open-loop gain and 140 dB
common-mode rejection make it ideal for precision
applications.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2018 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
AD708
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Theory of Operation ...................................................................... 10
Pin Configuration ............................................................................. 1
Crosstalk Performance .............................................................. 10
General Description ......................................................................... 1
Operation with a Gain of −100................................................. 11
Product Highlights ........................................................................... 1
High Precision Programmable Gain Amplifier ..................... 11
Revision History ............................................................................... 2
Bridge Signal Conditioner......................................................... 12
Specifications..................................................................................... 3
Precision Absolute Value Circuit ............................................. 12
Absolute Maximum Ratings............................................................ 5
Selection of Passive Components ............................................. 12
ESD Caution .................................................................................. 5
Outline Dimensions ....................................................................... 13
Typical Performance Characteristics ............................................. 6
Ordering Guide .......................................................................... 13
Matching Characteristics ............................................................. 9
REVISION HISTORY
7/2018—Rev. C to Rev. D
Changes to Figure 28, Figure 29, and High Precision
Programmable Gain Amplifier Section ....................................... 11
Changes to Ordering Guide .......................................................... 13
1/2006—Rev. B to Rev. C
Updated Format .................................................................. Universal
Removed TO-99 Package .................................................. Universal
Deleted AD707 References ................................................ Universal
Deleted LT1002 Reference................................................................1
Deleted Figure 1 .................................................................................1
Deleted Metalization Photograph ...................................................5
Moved Figure 25, Figure 26, and Figure 27
to Theory of Operation section .................................................... 10
Updated Outline Dimensions ....................................................... 13
Changes to Ordering Guide .......................................................... 13
2/1991—Rev. A to Rev. B
Rev. D | Page 2 of 16
Data Sheet
AD708
SPECIFICATIONS
At 25°C and ±15 V dc, unless otherwise noted.
Table 1.
Parameter
INPUT OFFSET VOLTAGE2
Conditions
TMIN to TMAX
Drift
Long Term Stability
INPUT BIAS CURRENT
TMIN to TMAX
Average Drift
OFFSET CURRENT
VCM = 0 V
TMIN to TMAX
Average Drift
MATCHING CHARACTERISTICS3
Offset Voltage
AD708J/AD708A
Min1 Typ Max1
30
100
50
150
0.3
1.0
0.3
1.0
2.5
2.0
4.0
15
40
0.5
2.0
2.0
4.0
2
60
Offset Voltage Drift
Input Bias Current
TMIN to TMAX
TMIN to TMAX
Power Supply Rejection
TMIN to TMAX
Channel Separation
INPUT VOLTAGE NOISE
INPUT CURRENT NOISE
COMMON-MODE REJECTION RATIO
OPEN-LOOP GAIN
POWER SUPPLY REJECTION RATIO
FREQUENCY RESPONSE
Closed-Loop Bandwidth
Slew Rate
INPUT RESISTANCE
Differential
Common Mode
0.1 Hz to 10 Hz
f = 10 Hz
f = 100 Hz
f = 1 kHz
0.1 Hz to 10 Hz
f = 10 Hz
f = 100 Hz
f = 1 kHz
VCM = ±13 V
TMIN to TMAX
VO = ±10 V
RLOAD ≥ 2 kΩ
TMIN to TMAX
VS = ±3 V to ±18 V
TMIN to TMAX
AD708B
Typ Max1
5
50
15
65
0.1
0.4
0.3
0.5
1.0
1.0
2.0
10
25
0.1
1.0
0.2
1.5
1
25
120
110
110
110
135
140
120
120
0.23
10.3
10.0
9.6
14
0.32
0.14
0.12
140
140
3
3
110
110
0.5
0.15
130
130
120
120
140
0.6
18
13.0
11.0
35
0.9
0.27
0.18
140
130
130
0.23
10.3
10.0
9.6
14
0.32
0.14
0.12
140
140
10
10
130
130
5
5
120
120
0.9
0.3
0.5
0.15
60
200
Rev. D | Page 3 of 16
Min1
AD708S
Typ Max1
5
30
15
50
0.1
0.3
0.3
0.5
1
1.0
4
10
30
0.1
1
0.2
1.5
1
25
50
75
0.4
1.0
2.0
80
150
1.0
4.0
5.0
TMIN to TMAX
Common-Mode Rejection
Min1
30
50
0.3
1.0
2.0
130
130
120
120
140
μV
μV
μV/°C
nA
nA
dB
dB
dB
dB
dB
μV p-p
nV/√Hz
nV/√Hz
nV/√Hz
pA p-p
pA/√Hz
pA/√Hz
pA/√Hz
dB
dB
130
130
0.23
10.3
10.0
9.6
14
0.32
0.14
0.12
140
140
10
10
130
130
4
4
120
120
10
7
130
130
V/μV
V/μV
dB
dB
0.9
0.3
0.5
0.15
0.9
0.3
MHz
V/μs
200
400
MΩ
GΩ
200
400
0.6
12
11.0
11.0
35
0.8
0.23
0.17
140
Unit
μV
μV
μV/°C
μV/month
nA
nA
pA/°C
nA
nA
pA/°C
0.35
12
11
11
35
0.8
0.23
0.17
AD708
Parameter
OUTPUT VOLTAGE
OPEN-LOOP OUTPUT RESISTANCE
POWER SUPPLY
Quiescent Current
Power Consumption
Operating Range
Data Sheet
Conditions
RLOAD ≥ 10 kΩ
RLOAD ≥ 2 kΩ
RLOAD ≥ 1 kΩ
TMIN to TMAX
AD708J/AD708A
Min1 Typ Max1
13.5 14
12.5 13.0
12.0 12.5
12.0
13.0
60
4.5
135
12
VS = ±15 V
VS = ±3 V
±3
5.5
165
18
±18
Min1
13.5
12.5
12.0
12.0
AD708B
Typ Max1
14.0
13.0
12.5
13.0
60
4.5
135
12
±3
5.5
165
18
±18
Min1
13.5
12.5
12.0
12.0
AD708S
Typ Max1
14
13
12.5
13
60
4.5
135
12
±3
5.5
165
18
±18
Unit
±V
±V
±V
±V
Ω
mA
mW
mW
V
All min and max specifications are guaranteed. Specifications in boldface are tested on all production units at final electrical test. Results from those tests are used to
calculate outgoing quality levels.
2
Input offset voltage specifications are guaranteed after five minutes of operation at TA = 25°C.
3
Matching is defined as the difference between parameters of the two amplifiers.
1
Rev. D | Page 4 of 16
Data Sheet
AD708
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Internal Power Dissipation1
Input Voltage2
Output Short-Circuit Duration
Differential Input Voltage
Storage Temperature Range (Q)
Storage Temperature Range (N)
Lead Temperature (Soldering 60 sec)
Rating
±22 V
±VS
Indefinite
+VS and −VS
−65°C to +150°C
−65°C to +125°C
300°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
Thermal Characteristics
8-lead PDIP: θJC = 33°C/W, θJA = 100°C/W
8-lead CERDIP: θJC = 30°C/W, θJA = 110°C/W
2
For supply voltages less than ±22 V, the absolute maximum input voltage is
equal to the supply voltage.
1
Rev. D | Page 5 of 16
AD708
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
VS = ±15 V and TA = 25°C, unless otherwise noted.
8
–0.5
7
+V
SUPPLY CURRENT (mA)
–1.0
–1.5
1.5
1.0
6
5
4
3
2
–V
–VS
1
0
5
10
15
20
0
25
05789-005
0.5
05789-002
COMMON-MODE VOLTAGE LIMIT (V)
(REFERRED TO SUPPLY VOLTAGES)
+VS
0
3
6
+VS
100
15
18
21
24
0.3
0.4
256 UNITS TESTED
–55°C TO +125°C
90
+VOUT
80
NUMBER OF UNITS
–1.0
–1.5
RL = 10kΩ
RL = 2kΩ
1.5
1.0
60
50
40
30
0
5
10
15
20
05789-006
–VS
70
20
–VOUT
0.5
05789-003
OUTPUT VOLTAGE SWING (±V)
(REFERRED TO SUPPLY VOLTAGES)
12
Figure 5. Supply Current vs. Supply Voltage
Figure 2. Input Common-Mode Range vs. Supply Voltage
–0.5
9
SUPPLY VOLTAGE (±V)
SUPPLY VOLTAGE (±V)
10
0
–0.4
25
–0.3
–0.2
–0.1
0
0.1
0.2
OFFSET VOLTAGE DRIFT (µV/°C)
SUPPLY VOLTAGE (±V)
Figure 3. Output Voltage Swing vs. Supply Voltage
Figure 6. Typical Distribution of Offset Voltage Drift
35
100
IO = 1mA
OUTPUT IMPEDANCE (Ω)
10
25
20
±15V SUPPLIES
15
10
AV = +1000
1
AV = +1
0.1
0.01
0
10
100
1k
0.0001
0.1
10k
LOAD RESISTANCE (Ω)
05789-007
0.001
5
05789-004
OUTPUT VOLTAGE (V p-p)
30
1
10
100
1k
10k
FREQUENCY (Hz)
Figure 4. Output Voltage Swing vs. Load Resistance
Figure 7. Output Impedance vs. Frequency
Rev. D | Page 6 of 16
100k
AD708
16
35
14
30
12
OPEN-LOOP GAIN (V/µV)
40
20
15
10
5
8
VOUT = ±10V
6
4
0
1
10
RL = 10kΩ
RL = 2kΩ
2
0
–60
100
–40
–20
0
DIFFERENTIAL VOLTAGE (±V)
45
16
40
14
35
30
25
1/F CORNER
0.7Hz
15
10
0.1
1
60
80
100
120
140
12
RLOAD = 2kΩ
10
8
6
4
10
0
100
05789-012
2
05789-009
5
0
40
Figure 11. Open-Loop Gain vs. Temperature
OPEN-LOOP GAIN (V/µV)
INPUT VOLTAGE NOISE (nV/ Hz)
Figure 8. Input Bias Current vs. Differential Input Voltage
20
20
TEMPERATURE (°C)
0
5
10
FREQUENCY (Hz)
15
20
25
SUPPLY VOLTAGE (V)
Figure 12. Open-Loop Gain vs. Supply Voltage
Figure 9. Input Noise Spectral Density
140
RL = 2kΩ
CL = 1000pF
1s
OPEN-LOOP GAIN (dB)
100
30
60
80
90
PHASE
MARGIN = 43°
60
120
40
150
GAIN
20
180
05789-010
0
–20
TIME (1s/DIV)
05789-013
VOLTAGE NOISE (100nV/DIV)
120
0
0.01
0.1
1
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 10. 0.1 Hz to 10 Hz Voltage Noise
Figure 13. Open-Loop Gain and Phase vs. Frequency
Rev. D | Page 7 of 16
PHASE (Degrees)
0
10
05789-011
25
05789-008
INVERTING OR NONINVERTING INPUT
BIAS CURRENT (mA)
Data Sheet
10M
AD708
Data Sheet
160
2mV/DIV
120
100
80
60
40
CH1
0
0.1
05789-014
20
05789-017
COMMON-MODE REJECTION (dB)
140
1
10
100
1k
10k
100k
TIME (2µs/DIV)
1M
FREQUENCY (Hz)
Figure 14. Common-Mode Rejection vs. Frequency
35
RL = 2kΩ
25°C
VS = ±15V
FMAX = 2.8kHz
30
2mV/DIV
25
20
15
10
CH1
05789-015
5
0
1k
10k
100k
05789-018
OUTPUT VOLTAGE (V p-p)
Figure 17. Small Signal Transient Response; AV = +1, RL = 2 kΩ, CL = 50 pF
TIME (2µs/DIV)
1M
FREQUENCY (Hz)
Figure 15. Large Signal Frequency Response
Figure 18. Small Signal Transient Response; AV = +1, RL = 2 kΩ, CL = 1000 pF
160
120
100
80
60
40
20
0
0.001
05789-016
POWER SUPPLY REJECTION (dB)
140
0.01
0.1
1
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 16. Power Supply Rejection vs. Frequency
Rev. D | Page 8 of 16
Data Sheet
AD708
MATCHING CHARACTERISTICS
32
16
25°C
14
PERCENTAGE OF UNITS (%)
24
20
16
12
8
0
–50
–40
–30
–20
–10
0
10
20
30
40
10
8
6
4
2
05789-019
4
12
0
–1.0
50
05789-022
PERCENTAGE OF UNITS (%)
28
–0.8
–0.6
OFFSET VOLTAGE MATCH (µV)
–0.4
–0.2
0
0.2
0.4
0.6
0.8
1.0
OFFSET CURRENT MATCH (nA)
Figure 19. Typical Distribution of Offset Voltage Match
Figure 22. Typical Distribution of Input Offset Current Match
32
160
140
24
120
20
16
12
100
80
60
8
40
4
20
0
–0.5
–0.4
–0.3
–0.2
–0.1
0
0.1
0.2
0.3
0.4
0
–60
0.5
05789-023
PSRR MATCH (dB)
28
05789-020
PERCENTAGE OF UNITS (%)
–55°C TO +125°C
–40
–20
0
OFFSET DRIFT MATCH (µV/°C)
14
140
12
120
10
8
6
20
0
0.2
0.4
120
140
120
140
60
2
–0.2
100
80
40
–0.4
80
100
4
–0.6
60
0.6
0.8
0
–60
1.0
INPUT BIAS CURRENT MATCH (nA)
Figure 21. Typical Distribution of Input Bias Current Match
05789-024
CMRR MATCH (dB)
160
05789-021
PERCENTAGE OF UNITS (%)
16
–0.8
40
Figure 23. PSRR Match vs. Temperature
Figure 20. Typical Distribution of Offset Voltage Drift Match
0
–1.0
20
TEMPERATURE (°C)
–40
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 24. Common-Mode Rejection Ratio (CMRR) Match vs. Temperature
Rev. D | Page 9 of 16
AD708
Data Sheet
THEORY OF OPERATION
CROSSTALK PERFORMANCE
Power = (30 V)(5 mA) = 150 mW
A
VOUTA
2kΩ
10kΩ
B
10Ω
VOUTB
10Ω
2V
05789-026
Even this large change in power causes only an 8 μV (linear)
change in the input offset voltage of Side B.
A
VIN = ±10V
ΔVOSB = 1µV/DIV
The AD708 exhibits very low crosstalk as shown in Figure 25,
Figure 26, and Figure 27. Figure 25 shows the offset voltage
induced on Side B of the AD708 when Side A output is moving
slowly (0.2 Hz) from −10 V to +10 V under no load. This is the
least stressful situation to the part because the overall power in
the chip does not change. Only the location of the power in the
output device changes. Figure 26 shows the input offset voltage
change to Side B when Side A is driving a 2 kΩ load. Here the
power changes in the chip with the maximum power change
occurring at 7.5 V. Figure 27 shows crosstalk under the most
severe conditions. Side A is connected as a follower with
0 V input, and is forced to sink and source ±5 mA of output
current.
VOUTA
VIN = ±10V
VOUTA = 2V/DIV
10kΩ
Figure 26. Crosstalk with 2 kΩ Load
IIN = ±5mA
B
10Ω
VOUTB
A
10Ω
2kΩ
VIN = ±10V
10kΩ
2V
B
10Ω
ΔVOSB = 1µV/DIV
10Ω
VOUTB
05789-025
ΔVOSB = 2µV/DIV
2V
VOUTA = 2V/DIV
05789-027
Figure 25. Crosstalk with No Load
INA = 1mA/DIV
Figure 27. Crosstalk Under Forced Source and Sink Conditions
Rev. D | Page 10 of 16
Data Sheet
AD708
1/2
OPERATION WITH A GAIN OF −100
To show the outstanding dc precision of the AD708 in a real
application, Table 3 shows an error budget calculation for a gain
of −100. This configuration is shown in Figure 28.
Table 3.
Error Sources
VOS
Maximum Error Contribution, AV = 100
(S Grade), (Full Scale: VOUT = 10 V, VIN = 100 mV)
30 μV/100 mV
= 300 ppm
IOS
(100 kΩ)(1 nA)/10 V
= 10 ppm
Gain (2 kΩ Load)
10 V/(5 × 106)/100 mV
= 20 ppm
Noise
0.35 mV/100 mV
= 4 ppm
VOS Drift
(0.3 mV/°C)/100 mV
= 3 ppm/°C
10kΩ
DA
A0
S1A
A1
S2A
SENSE
ADG1209
10kΩ
VSS
1kΩ
AD8276
100Ω
VOUT
REF
S4B
VDD
S3B
S2B
S1B
= 334 ppm > 11 bits
= 634 ppm > 10 bits
VINB
10kΩ
10kΩ
10kΩ
05789-029
At 25°C
−55°C to +125°C
With Offset
Calibrated Out
10kΩ
S4A
DB
Error
10kΩ
S3A
Total Unadjusted
1/2
AD708
At 25°C
= 34 ppm > 14 bits
Figure 29. Precision PGA
−55°C to +125°C
= 334 ppm > 11 bits
The gains of the circuit are controlled by the select lines, A0 and
A1, of the ADG1209 multiplexer and are 1, 10, 100, and 1000 in
this design.
100kΩ
The input stage attains very high dc precision due to the 30 μV
maximum offset voltage match of the AD708 and the 1 nA
maximum input bias current match. The accuracy is maintained over temperature because of the ultralow drift
performance of the AD708.
+VS
0.1µF
1kΩ
2
–
8
1/2
1
AD708
3
+
4
1kΩ
VOUT
The AD8276 unity-gain difference amplifier eliminates the need
for trimming in the second stage of the instrumentation
amplifier. The AD8276 has on-chip resistors that are laser
trimmed for excellent gain accuracy and high CMRR.
0.1µF
–VS
05789-028
VIN
AD708
VINA
To determine the CMRR, follow these steps:
Figure 28. Gain of −100 Configuration
This error budget assumes no error in the resistor ratio and no
error from power supply variation (the 120 dB minimum PSRR
of the AD708S makes this a good assumption). The external
resistors can cause gain error from mismatch and drift over
temperature.
1.
2.
Connect VINB to VINA and apply an input voltage equal to
the maximum and minimum full-scale common mode
expected.
Use the following equation to determine the CMRR:
CMRR = 20 log
HIGH PRECISION PROGRAMMABLE GAIN
AMPLIFIER
VCM
VOUT
where VCM is the common-mode voltage.
The 3-op-amp programmable gain amplifier shown in Figure 29
utilizes the matching characteristics of the AD708 to achieve
high dc precision.
To minimize gain errors, follow these steps:
1.
2.
3.
Select gain = 10 with the control lines and apply a
differential input voltage.
Adjust the 10 kΩ potentiometer to VOUT = 10 VIN
(adjust VIN magnitude as necessary).
Repeat Step 1 and Step 2 for gain = 100 and gain = 1000,
adjusting the 1 kΩ and 100 Ω potentiometers, respectively.
The design shown in Figure 29 allows 0.1% gain accuracy and
100 dB common-mode rejection when ±1% resistors and ±10%
potentiometers are used.
Rev. D | Page 11 of 16
AD708
Data Sheet
BRIDGE SIGNAL CONDITIONER
The AD708 can be used in the circuit shown in Figure 30 to
produce an accurate and inexpensive dynamic bridge conditioner. The low offset voltage match and low offset voltage drift
match of the AD708 combine to achieve circuit performance
better than all but the best instrumentation amplifiers. The
outstanding specifications of the AD708, such as open-loop
gain, input offset currents, and low input bias currents, do not
limit circuit accuracy.
As configured, the circuit only requires a gain resistor, RG, of
suitable accuracy and a stable, accurate voltage reference. The
transfer function is
In addition, the tight offset voltage drift match maintains the
resolution of the circuit over the full military temperature
range. The high dc open-loop gain and exceptional gain
linearity allows the circuit to perform well at both large and
small signal levels.
In this circuit, the only significant dc errors are due to the offset
voltage of the two amplifiers, the input offset current match of
the amplifiers, and the mismatch of the resistors. Errors
associated with the AD708S contribute less than 0.001% error
over −55°C to +125°C.
Maximum error at 25°C
30 μV + (10 kΩ )(1 nA )
VO = VREF [∆R/(R + ∆R)][RG/R]
10 V
The only significant errors due to the AD708S are
Maximum error at +125°C or −55°C
50 μV + (2 nA )(10 kΩ )
VOS_OUT = (VOS_MATCH)(2RG/R) = 30 mV
VOS_OUT (T) = (VOS_DRIFT)(2RG/R) = 0.3 mV/°C
10 V
To achieve high accuracy, Resistor RG should be 0.1% or better
with a low drift coefficient.
+15V
AD580
RG
175kΩ
2.5V
VREF
R = 350Ω
R
= 40 μV/10 μV = 4 ppm
= 7 ppm @ + 125°C
Figure 32 shows VOUT vs. VIN for this circuit with a ±3 mV input
signal at 0.05 Hz. Note that the circuit exhibits very low offset at
the zero crossing. This circuit can also produce VOUT = −|VIN| by
reversing the polarity of the two diodes.
1mV
1/2
1mV
AD708
VOUT = 1mV/DIV
VO
R + ΔR
R
1/2
AD708
05789-030
887Ω
–15V
Figure 30. Bridge Signal Conditioning Circuit
10kΩ
IN4591
10kΩ
10kΩ
5kΩ
VIN = 1mV/DIV
VO = |VIN|
IN4591
3.75kΩ
VIN
05789-032
10kΩ
SELECTION OF PASSIVE COMPONENTS
AD708
NOTE
1LOW LEAKAGE DIODES
05789-031
1/2
5kΩ
Figure 32. Absolute Value Circuit Performance
(Input Signal = 0.05 Hz)
1/2
AD708
Figure 31. Precision Absolute Value Circuit
PRECISION ABSOLUTE VALUE CIRCUIT
Use high quality passive components to take full advantage of
the high precision and low drift characteristics of the AD708.
Discrete resistors and resistor networks with temperature
coefficients of less than 10 ppm/°C are available from Vishay,
Caddock, Precision Replacement Parts (PRP), and others.
The AD708 is ideally suited to the precision absolute value
circuit shown in Figure 31. The low offset voltage match of the
AD708 enables this circuit to accurately resolve the input signal.
Rev. D | Page 12 of 16
Data Sheet
AD708
OUTLINE DIMENSIONS
0.400 (10.16)
0.365 (9.27)
0.355 (9.02)
0.005 (0.13)
MIN
0.055 (1.40)
MAX
8
8
1
5
4
0.280 (7.11)
0.250 (6.35)
0.240 (6.10)
0.310 (7.87)
0.220 (5.59)
0.100 (2.54)
BSC
0.060 (1.52)
MAX
0.015 (0.38)
GAUGE
PLANE
SEATING
PLANE
0.005 (0.13)
MIN
4
0.100 (2.54) BSC
0.195 (4.95)
0.130 (3.30)
0.115 (2.92)
0.015
(0.38)
MIN
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
1
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
PIN 1
0.210
(5.33)
MAX
0.150 (3.81)
0.130 (3.30)
0.115 (2.92)
5
0.014 (0.36)
0.010 (0.25)
0.008 (0.20)
0.430 (10.92)
MAX
0.060 (1.52)
0.015 (0.38)
0.200 (5.08)
MAX
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36)
0.070 (1.78)
0.060 (1.52)
0.045 (1.14)
0.320 (8.13)
0.290 (7.37)
0.405 (10.29) MAX
0.070 (1.78)
0.030 (0.76)
SEATING
PLANE
15°
0°
0.015 (0.38)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
COMPLIANT TO JEDEC STANDARDS MS-001-BA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS.
Figure 33. 8-Lead Plastic Dual In-Line Package [PDIP]
Narrow Body
(N-8)
Dimensions shown in inches and (millimeters)
Figure 34. 8-Lead Ceramic Dual In-Line Package [CERDIP]
(Q-8)
Dimensions shown in inches and (millimeters)
ORDERING GUIDE
Model1
AD708JNZ
AD708AQ
AD708BQ
AD708SQ/883B
1
Temperature Range
0°C to +70°C
−40°C to +85°C
−40°C to +85°C
−55°C to +125°C
Package Description
8-Lead Plastic Dual In-Line Package [PDIP]
8-Lead Ceramic Dual In-Line Package [CERDIP]
8-Lead Ceramic Dual In-Line Package [CERDIP]
8-Lead Ceramic Dual In-Line Package [CERDIP]
Z = RoHS Compliant Part.
Rev. D | Page 13 of 16
Package Option
N-8
Q-8
Q-8
Q-8
AD708
Data Sheet
NOTES
Rev. D | Page 14 of 16
Data Sheet
AD708
NOTES
Rev. D | Page 15 of 16
AD708
Data Sheet
NOTES
©2018 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05789-0-7/18(D)
Rev. D | Page 16 of 16
工商网监
湘ICP备2023018690号
