HMC588LC4B
v03.0810
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 8.0 - 12.5 GHz
Typical Applications
Features
Low Noise wideband MMIC VCO is ideal for:
Wide Tuning Bandwidth
• Industrial/Medical Equipment
Pout: +5 dBm
• Test & Measurement Equipment
Low SSB Phase Noise: -93 dBc/Hz @100 kHz
• Military Radar, EW & ECM
No External Resonator Needed
Single Positive Supply: +5V @ 55 mA
RoHS Compliant 4 x 4 mm SMT Package
Functional Diagram
The HMC588LC4B is a wideband GaAs InGaP HBT
MMIC Voltage Controlled Oscillator which incorporates the resonator, negative resistance device,
and varactor diode. Output power and phase noise
performance are excellent over temperature due to
the oscillator’s monolithic construction. The Vtune
port accepts an analog tuning voltage from 0 to +13V.
The HMC588LC4B VCO operates from a single +5V
supply, consumes only 55 mA of current, and is housed
in a RoHS compliant SMT package. This wideband
VCO uniquely combines the attributes of ultra small
size, low phase noise, low power consumption, and
wide tuning range.
8
WIDEBAND VCOS - SMT
General Description
Electrical Specifi cations, TA = +25° C, Vcc = +5V
Parameter
Min.
Frequency Range
Power Output
Typ.
2
Units
GHz
5
dBm
SSB Phase Noise @ 100 kHz Offset
-93
dBc/Hz
SSB Phase Noise @ 10 kHz Offset
-65
dBc/Hz
Tune Voltage (Vtune)
0
13
V
Supply Current (Icc) (Vcc = +5.0V)
40
75
mA
10
μA
Tune Port Leakage Current (Vtune = +13V)
Output Return Loss
2nd Harmonic
7
dB
-18
dBc
4
MHz pp
Pushing @ Vtune= +5V
100
MHz/V
Frequency Drift Rate
0.3
MHz/°C
Pulling (into a 2.0:1 VSWR)
8-1
Max.
8.0 - 12.5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC588LC4B
v03.0810
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 8.0 - 12.5 GHz
Frequency vs. Tuning Voltage, T = +25 C
14
14
13
13
OUTPUT FREQUENCY (GHz)
12
11
10
+25 C
+85 C
-40 C
9
8
12
11
10
4.75 V
5.00 V
5.25 V
9
8
7
7
0
1
2
3
4
5
6
7
8
0
9 10 11 12 13 14 15
1
2
3
Sensitivity vs. Tuning Voltage, Vcc= +5V
5
6
7
8
9 10 11 12 13 14 15
Output Power vs.
Tuning Voltage, Vcc= +5V
10
+25 C
+85 C
-40 C
800
600
400
200
OUTPUT POWER (dBm)
1000
SENSITIVITY (MHz/VOLT)
4
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
0
8
8
6
4
+25 C
+85 C
-40 C
2
0
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
0
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
TUNING VOLTAGE (VOLTS)
Typical SSB Phase Noise @ Vtune= +5V
0
0
-20
10 kHz
100 kHz
-30
-40
-50
-60
-70
-80
-90
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
-10
-20
-40
-60
WIDEBAND VCOS - SMT
OUTPUT FREQUENCY (GHz)
Frequency vs. Tuning Voltage, Vcc = +5V
-80
-100
-100
-110
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
TUNING VOLTAGE (VOLTS)
-120
2
10
3
10
4
10
5
10
6
10
OFFSET FREQUENCY (Hz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8-2
HMC588LC4B
v03.0810
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 8.0 - 12.5 GHz
Absolute Maximum Ratings
Vcc
+5.5 Vdc
Vtune
0 to +15V
Junction Temperature
135 °C
Continuous Pdiss (T = 85°C)
(derate 10.5 mW/°C above 85°C)
526 mW
Thermal Resistance
(junction to ground paddle)
95 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
WIDEBAND VCOS - SMT
8
8-3
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Pin Descriptions
Pin Number
Function
Description
1 - 3, 5 - 11,
13, 17 - 24
N/C
No Connection. These pins may be connected to RF/DC
ground. Performance will not be affected.
4
Vtune
Control Voltage and Modulation Input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varactor
Tuned VCO” application note.
12
Vcc
Supply Voltage Vcc= +5V
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC588LC4B
v03.0810
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 8.0 - 12.5 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
14, 16
GND
Package bottom has an exposed metal paddle that
must also be RF & DC grounded.
15
RFOUT
RF output (AC coupled)
Evaluation PCB
List of Materials for Evaluation PCB 108648 [1]
Item
Description
J1
PCB Mount SMA RF Connector, Johnson
J2
PCB Mount SMA Connector, SRI
J3
DC Header
C1
1000 pF Capacitor, 0402 Pkg.
C2
4.7 μF Capacitor, Tantalum
U1
HMC588LC4B VCO
PCB [2]
108646 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed ground paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
WIDEBAND VCOS - SMT
8
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use,orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8-4