AMC79L05DM

AMC79L05 www.addmtek.com DESCRIPTION The AMC79L05 is a 3-terminal fixed negative-voltage designed for a wide range of applications. This regulator can provide local on card regulation, eliminating the distribution problems associated with single point regulation. In addition, it can be used with power-pass elements to make high-current voltage regulators with 100mA output current. Protection features such as thermal shutdown and current limiting have been designed internally which will protect the device from damage in case of overload or overheating. 100mA / 3-TERMINAL NEGATIVE VOLTAGE REGULATOR FEATURES ±5% tolerance of output voltage Wide input range Internal thermal overload protection Output current > 100mA No External Components Short circuit protection Available in 3L plastic TO-92 and plastic 8 pin S.O.I.C. Identical pin assignment to earlier 79L05 series. APPLICATIONS Logic Systems Computer Add-On Cards Modem Cards Power Suppliers PACKAGE PIN OUT OUTPUT INPUT COMMON 3-Pin Plastic TO-92 (Top View) OUTPUT INPUT INPUT NC NC INPUT INPUT COMMON 8-Pin S.O.I.C Surface Mount (Top View) ORDER INFORMATION TA (OC) 0 to 70 0 to 70 Note: LP 3-pin Plastic TO-92 DM 8-pin Plastic SO-8 AMC79L05LP AMC79L05LP(Lead Free) AMC79L05DM AMC79L05DM(Lead Free) 1.All surface-mount and TO-92 packages are available in Tape & Reel. Append the letter “T” to part number (i.e. AMC79L05LPT or AMC79L05DMT). 2.For TO-92 in Tape & Box (without reel), add suffix “TB” (i.e. AMC79L05LPTB). 3.The letter ”F” is marked for Lead Free process. 1 DD062_D -JUNE 2006 Copyright © 2006 ADDtek Corp. AMC79L05 ABSOLUTE MAXIMUM RATINGS Input Voltage Operating free-air temperature range, TA Storage temperature range Lead temperature (soldiering, 10 seconds) Note 1: Exceeding these ratings could cause damage to the device. out of the specified terminal. (Note 1) -30V 0OC to 70 OC -65OC to 150OC 260 OC All voltages are with respect to Ground. Currents are positive into, negative THERMAL DATA LP PACKAGE: Thermal Resistance-Junction to Ambient, θJA DM PACKAGE: Thermal Resistance-Junction to Ambient, θJA Junction Temperature Calculation: TJ = TA + (PD × θJA). The θJA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. 156 OC/W 165 OC/W Copyright © 2006 ADDtek Corp. 2 DD062_D -- JUNE 2006 AMC79L05 RECOMMENDED OPERATING CONDITIONS Parameter Input Voltage Output Current Operating Virtual Junction Temperature Symbol VI IOUT TJ Recommended Operating Conditions Min. Typ. Max. -7 -20 0 100 125 Units V mA O C ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications in bold type apply over the operating temperature range of 0OC ≤ TJ ≤ +150OC, VIN = -10V,IOUT = 40mA,CIN = 0.33µF, COUT= 0.1µF, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Symbol TJ = 25 OC Output Voltage VOUT -7V ≤ VIN ≤ -20V, 1mA ≤ IOUT ≤ 40mA 1mA ≤ IOUT ≤ 70mA Line Regulation VOI VOL IPEAK -7V ≤ VIN ≤ -20V,TJ = 25 C O Test Conditions AMC79L05 Min. -4.8 -4.75 -4.75 15 Typ. -5.0 Max. -5.2 -5.25 -5.25 150 100 20 10 140 1.7 6.6 6.0 1.5 0.1 41 49 40 O Units V -8V ≤ VIN ≤ -20V,TJ = 25 C O mV Load Regulation Peak Output Current Dropout Voltage Quiescent Current 1mA ≤ IOUT ≤ 100mA, TJ = 25 OC 1mA ≤ IOUT ≤ 40mA, TJ = 25 OC TJ = 25 OC TJ = 25 C O 60 30 mV mA V mA IQ IQ RR TJ = 25 OC TJ = 125 C -8V ≤ VIN ≤ -20V 1mA ≤ IOUT ≤ 40mA f =120Hz, -8V ≤ VIN ≤ -18V, TJ = 25 OC O Quiescent Current Change Ripple Rejection ( note 2 ) mA dB µV Output Noise Voltage ( note 2 ) VO RMS 10Hz ≤ f ≤ 100KHz, TJ = 25 C Note 2: These parameters, although guaranteed, are not 100% tested in production prior to shipment Copyright © 2006 ADDtek Corp. 3 DD062_D -- JUNE 2006 AMC79L05 PACKAGE 3-Pin Plastic TO-92 B K M INCHES MIN TYP MAX MILLIMETERS MIN 4.45 4.32 3.18 TYP 4.57 4.57 3.62 0.38 1.27 3.81 MAX 5.21 5.33 4.19 - A G F A B 0.175 0.180 0.205 0.170 0.180 0.210 C 0.125 0.142 0.165 C F G N - 0.015 0.050 0.150 - J K 0.500 0.580 5º 5º 12.70 14.73 5º 5º Note: For TO-92 in tape & reel, refer to TO-92 package and carrier dimension data for M lead dimensions. N 3-Pin Plastic TO-92 Package (Taped and Reeled) and Carrier Dimensions P1 P INCHES MIN C MILLIMETERS MAX MIN 2.00 12.2 12.4 3.8 5.85 4.2 17.0 15.5 5.7 8.5 TYP 12.7 12.7 4.0 6.35 5.0 18.0 16.0 6.0 9.0 MAX 13.2 13.0 4.2 6.85 5.6 19.0 16.5 6.3 9.5 TYP - C 0.079 P 0.480 0.500 0.520 Ho Wo Po 0.488 0.500 0.512 Do 0.150 0.157 0.165 P1 0.230 0.250 0.256 W W1 Fo 0.165 0.197 0.220 W 0.669 0.709 0.748 Ho 0.610 0.630 0.649 F1 Do Po Fo Wo 0.224 0.236 0.248 W1 0.335 0.354 0.374 Note: For 3L TO92, 2,000 units per Reel Copyright © 2006 ADDtek Corp. 4 DD062_D -- JUNE 2006 AMC79L05 8-Pin Plastic S.O.I.C. A MIN A 0.183 0.144 INCHES TYP MAX 0.202 0.163 0.074 0.020 0.035 MILLIMETERS MIN 4.65 3.66 1.73 0.25 0.38 TYP 1.27 BSC 0.19 0.13 4.80 5.79 0.25 0.25 5.21 8º 6.20 MAX 5.13 4.14 1.88 0.51 0.89 B F P B C 0.068 D 0.010 D G F 0.015 L C SEATING PLAN K M J G J K L M 0.050 BSC 0.007 0.005 0.189 0.228 0.010 0.010 0.205 8º 0.244 Note: For 8 pin S.O.I.C., 100 units per tube P Copyright © 2006 ADDtek Corp. 5 DD062_D -- JUNE 2006 AMC79L05 IMPORTANT NOTICE ADDtek reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. ADDtek integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of ADDtek products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer’s applications, the customer should provide adequate design and operating safeguards. ADDtek assumes to no liability to customer product design or application support. ADDtek warrants the performance of its products to the specifications applicable at the time of sale. ADDtek Corp. 9F, No. 20, Sec. 3, Bade Rd., Taipei, Taiwan, 105 TEL: 2-25700299 FAX: 2-25700196 Copyright © 2006 ADDtek Corp. 6 DD062_D -- JUNE 2006