O.2US5-N0.1

ULTRAVOLT US SERIES MICRO-SIZED HIGH VOLTAGE POWER SUPPLIES Measuring only 5.75 cc (0.35 in3 ), the highly compact, micro-sized UltraVolt® US series is specially designed to meet the needs of design engineers working with commercial, military, industrial, and medical applications. These modules allow access to voltages up to 500 V for customers with size-critical requirements. PRODUCT HIGHLIGHTS  Micro-sized: 5.75 cc  Programmable HV output ±0.5% F.S.  Lightweight: 13 g  Output arc and short circuit protection  PCB flat mounting: 11 mm height  5, 9 or 12 VDC Input  4 models from 0 to 200 V to 500 V  Precision 2.5 V reference  100 mW output power  TTL enable/disable/inhibit  Low ripple < 0.01% peak to peak  Output voltage monitor  Tight line/load regulation < ±0.01%  Metal case for low radiated noise  Low temperature coefficient  Optional flying lead for HV output < ±50 ppm per °C TYPICAL APPLICATIONS  Small, lightweight, portable devices  Ionization detectors  Fiber-optic telecom detectors  Ultrasonic transducers  Particle physics detectors  Small PZT drivers  Laser range finder detectors  ATE leakage testing  Thin-film bias  Bias supplies  Avalanche photo diodes (APD)  Silicon photomultipliers (SiPM)  Multi-pixel photon counter (MPPC) ©2020 Advanced Energy Industries, Inc. ULTRAVOLT US SERIES ELECTRICAL SPECIFICATIONS Parameters Specifications Units Input Voltage Vin 5 VDC ±0.5 or 12 to 15 ±0.5 VDC Input Current Inhibition mode: < 5 at full output voltage, full load: < 65 (200 Vout) mA < 60 (300 Vout) < 55 (400 Vout) < 50 (500 Vout) mA Polarity Fixed positive or negative Output Voltage 0 to 200 0 to 300 0 to 400 0 to 500 VDC - Output Current 500 330 250 200 µA HV Setting Via external potentiometer, minimum resistance 10 kΩ or via external voltage source 0/2.5V ±0.5% at full scale, and input impedance > 1 MΩ - Load Voltage Regulation ±0.01% of full output voltage for no load to full load - Line Voltage Regulation ±0.01% of full output voltage over specified input voltage range - Residual Ripple < 0.01% pk to pk at full output voltage and current - Temperature Coefficient < 50 PPM/°C Output HV Monitoring 0/2.5 V signal - Accuracy: ±0.2% F.S. Output impedance: 1 kΩ Output Reference Voltage 2.5 V ±0.5%, TC: 50 ppm/°C, max output current: 1 mA - HV Power ON/OFF ON: 0 V, connected to ground - OFF: not connected Open collector compatible Operating Temperature -10 to +65, full load, max Eout, case temp. °C Storage Temperature -40 to +70 °C Safeguards Output current internally limited - Soft start feature: the start is guaranteed with no overshoot 2 advancedenergy.com ULTRAVOLT US SERIES MECHANICAL SPECIFICATIONS Drawing views: third angle projections. Dimensions Volumes and Weights Pin Length > 2 mm (0.078"), spacing 2.54 mm (0.1") Optional Lead Coaxial cable (RG178), diameter 2 mm (0.079"), length 500 mm (19.685") Volume Weight Construction Casing Steel, tin-plated, thickness 0.5 mm (0.02") Insulation Fully potted in RTV Pin Length > 2 mm (0.078"), spacing 2.54 mm (0.1") Optional Lead Coaxial cable (RG178), diameter 2 mm (0.079"), length 500 mm (19.685") cc3 in3 5.750 0351 in3 g oz 13 0.459 oz advancedenergy.com 3 ULTRAVOLT US SERIES INTERFACE Connections Pin Function 1 Positive Power Input 2 Power Ground 3 Remote Adjust Input 4 +2.5 VDC Reference Output 5 Enable/Disable 6 Eout Monitor 7 HV Output Mounting tabs must be connected to ground. 4 advancedenergy.com ULTRAVOLT US SERIES ORDERING INFORMATION Type Input 0 to 200 VDC Output 0.2US 0 to 300 VDC Output 0.3US 0 to 400 VDC Output 0.4US 0 to 500 VDC Output 0.5US 5 VDC Nominal 5 12 VDC Nominal 12 Power W Output 0.1 Case Steel, Tin-plated Case (Standard) Polarity Positive Output -P Negative Output -N Output Voltage Lead Wire -WS Option Popular accessories ordered with this product include the PCB-CONN-US. The US series is not available in all territories. Please contact Advanced Energy for details concerning sales in your area. 0.5US-5-P-0.1-WS Voltage Option Model Power Output Polarity Input Voltage advancedenergy.com 5 DS TITLE ABOUT ADVANCED ENERGY Since 1981, UltraVolt® — now part of the Advanced Energy (AE) family — has perfected how power performs for its customers. For both end users and OEMs, AE’s comprehensive portfolio of standard and custom high voltage components precisely match system specifications to deliver unparalleled energy, quality, and performance. Through close customer collaboration, design expertise, application insight, and world-class support, AE creates successful partnerships and enables customers to push the boundaries of innovation and stay ahead of evolving market needs. PRECISION | POWER | PERFORMANCE Read and understand all documentation before you install, operate, or maintain Advanced Energy high voltage power supplies. Follow all safety instructions and precautions to protect against CAUTION: High Voltage For international contact information, visit advancedenergy.com. uv-ca@aei.com +1.970.221.0108 property damage and serious or possibly fatal bodily injury. Never defeat safety interlocks or grounds. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc. ENG-HV-USSeries-235-01 1.20