SLSD-71N200

Solderable Planar Photodiode PRELIMINARY SLSD-71N200 Advanced Photonix, Inc. Precision – Control – Results WWW.ADVANCEDPHOTONIX.COM DESCRIPTION FEATURES The SLSD-71N200 is a solderable planar photodiode featuring low cost, high reliability, and linear short circuit current over a wide range of illumination. These devices are widely used for light sensing and power generation because of their stability and high efficiency. They are particularly suited to power conversion applications due to their low internal impedance, relatively high shunt impedance, and stability. The photodiodes have a protective coating that protects them from humidity effects. These devices also provide a reliable and inexpensive detector for instrumentation and light beam sensing applications. • • • • • • RELIABILITY APPLICATIONS • Light sensing • Power generation This API high-reliability detector is in principle able to meet military test requirements (Mil-STD-750, Mil-STD-883) after proper screening and group test. Contact API for recommendations on specific test conditions and procedures. Visible to IR spectral irradiance range High reliability Oxide passivation Linear short circuit current Low capacitance, high speed Si surface protected with the thin film coating ABSOLUTE MAXIMUM RATINGS Operating Temperature Storage Temperature Soldering Temperature Wavelength Range -40 -40 to to 400 to Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. +105 +105 +240 1100 °C °C °C nm non condensing REV 08-20-15 Page 1/2 © 2015 Advanced Photonix, Inc. All rights reserved. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 Solderable Planar Photodiode PRELIMINARY SLSD-71N200 Advanced Photonix, Inc. Precision – Control – Results WWW.ADVANCEDPHOTONIX.COM Ta = 23°C unless noted otherwise OPTO-ELECTRICAL PARAMETERS PARAMETER TEST CONDITIONS Short Circuit Current Open Circuit Voltage Dark Current Junction Capacitance Spectral Sensitivity Breakdown Voltage Maximum Sensitivity Wavelength Acceptance Half Angle MIN TYP MAX UNITS VR =0V, Ee=25mW/cm² ** Ee=25mW/cm² ** VR =5V, Ee=0, T=25°C VR=0V, Ee=0, f=1MHz λ=940nm; Flood illumination* IR=100µA 0.7 20 1.2 0.40 0.7 0.55 - 3.3 - mA V µA nF A/W V - - 930 - nm (off center-line) - 60 - deg * Minimum 50% of active area illuminated ** Light source @ 2854°K TYPICAL PERFORMANCE DIRECTIONAL SENSITIVITY Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. REV 08-20-15 Page 2/2 © 2015 Advanced Photonix, Inc. All rights reserved. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935