MA4P7441F-1091T

MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Features  Non-Magnetic Package Suitable for MRI Applications  Rectangular MELF SMQ Ceramic Package  Hermetically Sealed  Lower Rs for Lower Series Loss  Longer L for Lower Intermodulation Distortion  Lower Cj for Higher Series Isolation  Higher Average Incident Power Handling Capability Description and Applications The MA4P7441F-1091T is a surface mountable PIN diode in a Non-Magnetic ( patent pending ) Metal Electrode Leadless Faced (MELF) package. The device incorporates M/A-COM’s proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. The package utilizes M/A-COM’s new non- magnetic plating process to provide an extremely low permeability, hermetically sealed package. Incorporated in the package is a passivated PIN diode that is full face bonded on both the cathode and anode of the chip to maximize surface area for lower electrical and thermal resistance. The MA4P7441F-1091T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. This MA4P7441F-1091T Non-Magnetic device is similar in electrical performance to the MA4P4001F-1091T Magnetic part number. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solder able surfaces are tin plated and compatible with reflow and vapor phase soldering methods. The diodes are well suited for use in low loss, low distortion, and high power switching circuits applicable for high magnetic field environments from HF through UHF frequencies. The lower thermal resistance of this device provides excellent higher average performance at RF power incident levels up to 200 watts CW. This device is designed to meet the most rigorous electrical and mechanical requirements of MRI testing environments. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Environmental Capability HIPAX devices are applicable for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. MIL-STD-750 Test Method Description High Temperature Storage 1031 +150 °C, for 340 Hours Temperature Shock 1051 -65 °C to +125 °C, 20 Cycles HTRB 1038 80% of rated VB, +150 °C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85 % RH, +85° C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000 G’s, 60 Hz, x, y, z axis Solderability 2026 Test Temperature = +245 °C Ordering Information Part Number Package MA4P7441F-1091T Tape and Reel 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Electrical Specifications @ +25 °C Parameter Symbol Condition Unit Value Forward Voltage (Maximum) VF IF = +100 mA 1.0 VDC Voltage Rating (Minimum) VR Ir = -10 uA l –100 l VDC Total Capacitance (Maximum) CT -100 V @ 100 MHz 2.2 pF Series Resistance (Maximum) RS +100 mA @ 100 MHz 0.5 Ohms Parallel Resistance (Minimum) RP -10 V @ 100 MHz 10 K  Carrier Lifetime (Nominal) L +6 mA / -10 mA @ (50% - 90% Voltage) 18 us I-Region Length (Nominal) m - 175 m C.W. Thermal Resistance (Maximum)  IH = 1A, IL = 10 mA, T = 1 mS 5 °C/W Power Dissipation in Free Air (Maximum) W IF = +100 mA 9W Power Dissipation with Diode Case at Tambient (Maximum) PD IF = +100 mA 30 W Absolute Maximum Ratings1 @ 25°C Parameter Absolute Maximum Operating Temperature -65 °C to +125 °C Storage Temperature -65 °C to +150 °C Diode Junction Temperature +175 °C Continuous Diode Mounting Temperature +235 °C for 10 seconds RF C.W. Incident Power + 53 dBm C.W. Forward D.C. Current + 500 mA Reverse D.C. Voltage @ -10 uA l - 150 V l 1. Exceeding these limits may cause permanent damage. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Mechanical Outline Case Style 1091 Dimensions in Inches (mm) A Square Min / Max B Min / Max C Min / Max 0.138 / 0.155 (3.50/ 3.94) 0.180 / 0.200 (4.57/ 5.08) 0.008 / 0.030 (.203 / .762) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Typical Electrical Performance MA4P7441F-1091T Rs vs I 1000 100 MHz Rs (Ohms) 100 1000 MHz 10 1 0.1 0.01 0.10 1.00 10.00 100.00 I ( mA ) MA4P7441F-1091T Rp vs Voltage Rp (Ohms) 10000 Rp_1500 MHz 1000 1.0 10.0 100.0 Voltage ( V ) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Typical Electrical Performance MA4P7441F-1091T Ct vs Voltage Ct (pF) 10 Ct_1500 MHz Ct_100 MHz 1 0.10 1.00 10.00 100.00 Voltage ( V ) MA4P7441F-1091T Ls vs Frequency 1 Ls (nH) Ls_50 mA 0.1 100.00 1000.00 F ( MHz ) 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 Typical Non-Magnetic Performance Comparison of Magnetic Moment for MA4P7400F-1091T Non-Magnetic & MA4P4001F-1091T Magnetic Devices Series 1.5E-01 Device Magnetic Moment (EMU) 1.0E-01 MA4P4001F-1091T Magnetic 5.0E-02 0.0E+00 MA4P7400F-1091T Non-Magnetic Series -5.0E-02 -1.0E-01 -1.5E-01 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Table 1 - Typical Magnetic Properties of Non-Magnetic MA4P7441F-1091T Device Vs. Conventional MA4P4001F-1091T Magnetic Device Magnetic Property MA4P7441F-1091T Value MA4P4001-1091T Value Saturation Moment (EMU) @ H = HMAX Oersteads 1.0 x E-3 1.2 x E-1 Remanance Moment (EMU) @ H = 0 Oersteads 1.5 x E-6 3.4 x E-2 Coercivity (Oersteads) @ EMU = 0 Moment 3.0 51.3 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MA4P7441F-1091T Non Magnetic SMQ HIPAX PIN Diode Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support