A6118ELW

6118 A6118SLW VACUUM FLUORESCENT DISPLAY DRIVER Consisting of eight npn Darlington output stages and the associated common-emitter input stages, these drivers are designed to interface between low-level digital logic and vacuum fluorescent displays. Both devices are capable of driving the digits and/or segments of these displays and are designed to permit all outputs to be activated simultaneously. Pull-down resistors are incorporated into each output and no external components are required for most fluorescent display applications. With any device, the output load is activated when the input is pulled towards the positive supply (active ‘high’). The UDN6118A is furnished in a standard 18-pin plastic DIP; the A6118SLW is in a 20lead wide-body SOIC. Both units operate over the temperature range of -20°C to +85°C. These devices are also available for operation over the temperature range of -40°C to +85°C by changing the part number to UDQ6118A or A6118ELW. Data Sheet 29313D* 1 2 3 4 5 6 7 8 9 10 NC 20 19 18 17 16 15 14 13 V BB 12 NC 11 FEATURES I Digit or Segment Drivers I Low Input Current I Integral Output Pull-Down Resistors I High Output Breakdown Voltage I Single or Split Supply Operation I Automotive Capable Dwg. PP-064-3 ABSOLUTE MAXIMUM RATINGS at TA= +25°C Supply Voltage, VBB . . . . . . . . . . . . . . . 85 V Input Voltage, VIN . . . . . . . . . . . . . . . . . 20 V Output Current, IOUT . . . . . . . . . . . . -40 mA Allowable Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . See Graph Operating Temperature Range, TA . . . . . . . . . . . . . . . . . -20°C to +85°C Storage Temperature Range, TS . . . . . . . . . . . . . . . -55°C to +150°C Caution: The high input impedance of these devices makes them susceptible to static discharge damage associated with handling and testing. Techniques similar to those used for handling MOS devices should be employed. Always order by complete part number, e.g., UDN6118A . 6118 VACUUM FLUORESCENT DISPLAY DRIVER UDN6118A 1 2 3 4 5 6 7 8 9 18 30K PARTIAL SCHEMATIC ONE DRIVER (ALL TYPES) V BB 17 16 15 R IN 27K 14 13 12 11 V BB 10 INPUT R B 15K OUTPUT 125K GND Dwg. No. A-10,592C RIN 10 kΩ RB 30 kΩ Dwg. PP-065 ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS 2.5 2.0 SUFFIX 'A', R θJA = 60°C/W 1.5 1.0 SUFFIX 'LW', R θJA = 70°C/W 0.5 0 25 50 75 100 125 AMBIENT TEMPERATURE IN °C 150 Dwg. GS-009-1 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright © 1977, 2000 Allegro MicroSystems, Inc. 6118 VACUUM FLUORESCENT DISPLAY DRIVER ELECTRICAL CHARACTERISTICS (over operating temperature range) at VBB = 80 V. Characteristic Output Leakage Current Output OFF Voltage Output Pull-Down Current Output ON Voltage Input ON Current Symbol IOUT VOUT IOUT VOUT IIN Test Conditions VIN = 0.4 V VIN = 0.4 V Input Open, VOUT = VBB VIN = 2.4 V, IOUT = -25 mA VIN = 2.4 V VIN = 5.0 V Supply Current IBB All Inputs Open All Inputs = 2.4 V Min. — — 450 77 — — — — Limits Typ. Max. — — 650 78 120 375 10 6.0 15 1.0 1100 — 225 650 100 9.0 Units µA V µA V µA µA µA mA RECOMMENDED OPERATING CONDITIONS Characteristic Supply Voltage Input ON Voltage Output ON Current Symbol VBB VIN IOUT Test Conditions Min. 5.0 2.4 — Typ. — — — Limits Max. 70 15 -25 Units V V mA NOTE: Positive (negative) current is defined as going into (coming out of) the specified device terminal. www.allegromicro.com 6118 VACUUM FLUORESCENT DISPLAY DRIVER TYPICAL MULTIPLEXED FLUORESCENT DISPLAY VBB SEGMENT SELECT b a f g e d c dp 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 VBB 10 DIGIT SELECT UDN6118 D1 D2 D3 D4 D5 D6 D7 D8 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 VBB 10 VBIAS VFIL Dwg. No. A-10,261B 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6118 VACUUM FLUORESCENT DISPLAY DRIVER UDN6118A Dimensions in Inches (controlling dimensions) 18 10 0.014 0.008 0.430 0.280 0.240 MAX 0.300 BSC 1 0.070 0.045 0.100 0.920 0.880 BSC 9 0.005 MIN 0.210 MAX 0.015 MIN 0.150 0.115 0.022 0.014 Dwg. MA-001-18A in Dimensions in Millimeters (for reference only) 18 10 0.355 0.204 10.92 7.11 6.10 MAX 7.62 BSC 1 1.77 1.15 2.54 23.37 22.35 BSC 9 0.13 MIN 5.33 MAX 0.39 MIN 3.81 2.93 0.558 0.356 Dwg. MA-001-18A mm NOTES: 1. 2. 3. 4. Exact body and lead configuration at vendor’s option within limits shown. Lead spacing tolerance is non-cumulative. Lead thickness is measured at seating plane or below. Supplied in standard sticks/tubes of 21 devices. www.allegromicro.com 6118 VACUUM FLUORESCENT DISPLAY DRIVER A6118SLW Dimensions in Inches (for reference only) 20 11 0.0125 0.0091 0.2992 0.2914 0.419 0.394 0.050 0.016 0.020 0.013 1 2 3 0.5118 0.4961 0.050 BSC 0° TO 8° 0.0926 0.1043 0.0040 MIN. Dwg. MA-008-20 in Dimensions in Millimeters (controlling dimensions) 20 11 0.32 0.23 7.60 7.40 10.65 10.00 1.27 0.40 0.51 0.33 1 2 3 13.00 12.60 1.27 BSC 0° TO 8° 2.65 2.35 0.10 MIN. Dwg. MA-008-20 mm NOTES:1. Exact body and lead configuration at vendor’s option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Supplied in standard sticks/tubes of 37 devices or add “TR” to part number for tape and reel. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6118 VACUUM FLUORESCENT DISPLAY DRIVER The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. www.allegromicro.com 6118 VACUUM FLUORESCENT DISPLAY DRIVER HIGH-VOLTAGE (≥60 V) PERIPHERAL POWER AND DISPLAY DRIVERS IN ORDER OF 1) OUTPUT VOLTAGE, 2) OUTPUT CURRENT, 3) NUMBER OF DRIVERS Output Ratings* V 60 mA -25 -25 -25 -25 -25 300 600 600 700 700 4000 -350 350 350 -350 1500 4000 -25 300 300 350 350 250 # 8 10 12 20 32 4 4 4 4 4 4 8 8 8 8 4 4 8 7 8 7 8 7 Serial Input – X X X X – – – – – – – X X X – – – – – – – – Latched Drivers X X X X X – – – – – – – X X X – – – – – – – – Features Diode Saturated Internal Clamp Outputs Protection – Active Pull-Down Active Pull-Down Active Pull-Down Active Pull-Down X – X X X X X – X X – X – X X X X X – – – – – X X X X X – – – – – – – – – – – – – – – – – – X X X X X – – – – – – – – – – – – – Part Number † 5815 5810-F and 6809/10 5811 and 6811 5812-F and 6812 5818-F and 6818 2557 2547 2549 2559 2543 2944 2983 and 2984 5822 5842 5890 2065 and 2069 2879 6118 2023 2823 2024 2824 7003 80 85 95 135 * Current is maximum test condition; voltage is absolute maximum allowable. Negative current is defined as coming out of (sourcing) the output. † Complete part number includes additional characters to indicate operating temperature range and package style. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000