BD1416N50100AHF

Model BD1416N50100AHF Rev B Ultra Low Profile 0404 Balun 50Ω to 100Ω Balanced Description The BD1416N50100AHF is a low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets specifically in the GPS, GLONASS, WiMAX 1.5 (legacy TDM) and US DVB-H space and in an easy to use surface mount package. The BD1416N50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. The BD1416N50100AHF has an unbalanced port impedance of 50Ω and a 50Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD1416N50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Features: • • • • • • • • • • • 1400 – 1600 MHz 0.57 mm Height Profile 50 Ohm to 2 x 50 Ohm Low Insertion Loss Class Leading CMRR Targeted At GPS, GLONASS, WiMAX 1.5 (legacy TDM) & US DVB-H Markets Surface Mountable Tape & Reel Non-Conductive Top Surface RoHS Compliant Halogen Free ROOM (25°°C) Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling @85C Power Handling @105C Operating Temperature 1400 Typ. Max Unit 1600 MHz Ω Ω dB dB dB Degrees dB Watts Watts ºC 50 100 18 0.7 0.8 4 26 14 0.9 1.2 9 0.75 0.45 +105 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .24 .57+.06 1.04±.10 3x .27 2 1 -.10 .24 .30 .30 1.04±.10 3x .27 .50 3x .25 3 4 3x .25 Pin Designation GND / DC Feed 1 + RF GND .50 2 Unbalanced Port Dimensions are in Millimeters Mechanical Outline 3 Balanced Port 4 Balanced Port Visit us at www.Anaren.com Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1416N50100AHF Rev B Typical Performance:1300 MHz. to 1700 MHz. Return Loss-Input 0.0 0 -0.4 -4 -7 -1.1 -11 -1.4 -14 Frequency [MHz] 1625 1650 1675 1700 1650 1675 1700 1525 1500 1475 1450 1425 1400 1375 1350 1325 1700 1675 1650 1625 1600 -20 1575 -15 -2 1550 -1.5 1525 -10 1500 -1 1475 1625 0 -5 1300 -0.5 1450 1600 5 0 1425 1575 10 1400 1600 1 0.5 1375 1575 15 1350 1550 20 [degree] 2 1325 1525 Phase Balance 1.5 1300 1500 Frequency [MHz] Amplitude Balance [dB] 1550 Frequency [MHz] 1475 1450 1425 1400 1300 1700 1675 1650 1625 1600 1575 1550 1525 1500 1475 1450 1425 -36 1400 -32 -3.6 1375 -29 -3.2 1350 -25 -2.9 1325 -22 -2.5 1375 -18 -2.2 1350 -1.8 1325 [dB] -0.7 1300 [dB] Insertion Loss Frequency [MHz] CMRR 0 -3.6 -7.2 -10.8 -18 -21.6 -25.2 -28.8 -32.4 1700 1675 1650 1625 1600 1575 1550 1525 1500 1475 1450 1425 1400 1375 1350 1325 -36 1300 [dB] -14.4 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1416N50100AHF Rev B Wide Band Performance: 10 MHz. to 8010 MHz. Return Loss-Input 0.0 0 -0.4 -4 -7 -1.1 -11 -1.4 -14 Frequency [MHz] 6510 7010 7510 8010 7510 8010 5010 4510 4010 3510 3010 2510 2010 1510 1010 510 8010 7510 7010 6510 6010 -20 5510 -15 -2 5010 -1.5 4510 -10 4010 -1 3510 5010 0 -5 10 -0.5 3010 7010 5 0 2510 6510 10 2010 6010 1 0.5 1510 6010 15 1010 5510 20 [degree] 2 10 4510 Phase Balance 1.5 510 4010 Frequency [MHz] Amplitude Balance [dB] 5510 Frequency [MHz] 3510 3010 2510 2010 10 8010 7510 7010 6510 6010 5510 5010 4510 4010 3510 3010 2510 -36 2010 -32 -3.6 1510 -29 -3.2 1010 -25 -2.9 10 -22 -2.5 1510 -18 -2.2 1010 -1.8 510 [dB] -0.7 510 [dB] Insertion Loss Frequency [MHz] CMRR 0 -3.6 -7.2 -10.8 -18 -21.6 -25.2 -28.8 -32.4 8010 7510 7010 6510 6010 5510 5010 4510 4010 3510 3010 2510 2010 1510 510 1010 -36 10 [dB] -14.4 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1416N50100AHF Rev B Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias 3x Transmission Line 3x .29 With DC Bias Plated thru hole to ground Plated thru hole to ground .33 3x Transmission Line 3x .29 .33 3x .29 .33 3x .29 .22 .50 .50 .22 .22 .22 .50 .50 Circuit Pattern Circuit Pattern Footprint Pad (s) Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint Visit us at www.Anaren.com Solder Resist Dimensions are in Millimeters Mounting Footprint USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1416N50100AHF Rev B Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282