BSP75GQTC

BSP75GQ ADVANCE INFORMATION 60V SELF-PROTECTED LOW-SIDE INTELLIFET MOSFET SWITCH Product Summary Features and Benefits  Continuous Drain Source Voltage: VDS = 60V   On-State Resistance: 550mΩ Nominal Load Current (VIN = 5V) : 1.4A  Clamping Energy: 550mJ          Short Circuit Protection with Auto Restart Over Voltage Protection (Active Clamp) Thermal Shutdown with Auto Restart Over-Current Protection Input Protection (ESD) Load Dump Protection (Actively Protects Load) Logic Level Input High Continuous Current Rating Lead-Free Finish; RoHS Compliant (Note 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3)  Qualified to AEC-Q101 Standards for High Reliability  PPAP Capable (Note 4) Description The BSP75GQ is a Self-protected low-side MOSFET. It features monolithic over temperature, over current, over voltage (active clamp) and ESD protected logic level functionality. It is intended as a general purpose switch. Applications  Especially Suited for Loads with a High In-Rush Current such as Lamps and Motors All Types of Resistive, Inductive and Capacitive Loads in Switching Applications μC Compatible Power Switch for 12V and 24V DC Applications Automotive Rated Replaces Electromechanical Relays and Discrete Circuits Linear Mode Capability - the current-limiting protection circuitry is designed to de-activate at low VDS to in order not to compromise      Mechanical Data      Case: SOT223 (Type DN) Case Material: Molded Plastic, “Green” Molding Compound UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish e3 Weight: 0.112 grams (Approximate) the load current during normal operation. The maximum DC operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. SOT223 (Type DN) Top View Pin Out Top View Note: The tab is connected to the drain pin, and must be electrically isolated from the source pin. Connection of significant copper to the tab is recommended for best thermal performance. Ordering Information (Note 5) Product BSP75GQTA BSP75GQTC Notes: Marking BSP75G BSP75G Reel Size (inches) 7 13 Tape Width (mm) 12 12 Quantity per Reel 1,000 Units 4,000 Units 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain