BT09AG_1

BT09AG 5-4000 MHz Wideband Medium Power Amplifier Device Features      OIP3 = 43.0 dBm @ 900 MHz Gain = 20.0 dB @ 900 MHz Output P1 dB = 24.5 dBm @ 900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Parameter 900 Gain S11 S22 OIP3 P1dB Noise Figure 1 2 Product Description BeRex’s BT09AG is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Frequency 1900 14.5 -22.0 -16.0 43.0 24.2 4.2 2450 12.5 -16.0 -24.0 43.0 26.0 4.3 3500 9.20 -17.0 -23.0 39.0 25.8 5.0 Unit MHz dB dB dB dBm dBm dB 20.0 -17.0 -14.0 2 43.0 24.5 4.2 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 14 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH 5 140 Typical 160 5.0 50 Max. 4000 180 Unit MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +7.0 220 23 Unit °C °C °C V mA dBm Application Circuits Vcc Bypass RF Choke RF In DC Block BT09AG RF Out DC Block *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 13. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=162mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 162mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 dB -4.07 -3.168 -2.660 -2.673 -2.835 -3.238 -3.108 -2.733 -2.13 S11 Ang 176.11 154.36 124.21 95.30 66.61 32.55 -5.552 -42.25 -71.93 S21 dB 23.805 20.639 16.421 13.291 11.151 9.711 8.137 6.121 4.604 S21 Ang 162.696 108.6 66.7556 37.077 9.186 -19.52 -49.49 -78.61 -100.97 S12 dB -31.49 -30.63 -29.14 -27.53 -25.83 -24.37 -23.08 -23.30 -22.79 S12 Ang 0.3816 2.108 -3.335 -12.30 -22.90 -40.16 -63.43 -84.36 -104.55 S22 dB -10.62 -8.770 -7.815 -7.601 -8.033 -9.343 -10.36 -9.213 -7.32 S22 Ang 179.54 164.09 137.25 115.23 94.350 70.088 33.584 -8.5102 -41.052 Typical Performance (Vd = 5V, Ic = 162mA, T = 25°C) Freq S21 S11 S22 P1 OIP3 NF MHz dB dB dB dBm dBm dB 70 24.7 -18 -18 24.5 39 3.7 170 25 -19 -16 25.5 40 3.8 240 24.8 -20 -26 25 40 3.9 500 23 -17 -16 24.5 41.5 3.8 900 20.0 -17 -14 24.5 43 4.2 1900 14.5 -22 -16 24.2 43 4.2 2450 12.5 -16 -24 26 43 4.3 BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier WCDMA 6FA 2140 –55dBc WCDMA 6FA 2140 –60dBc BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier ACLR Application Circuit: 70~500 MHz Schematic Diagram BOM C1 C2 C1 C2 C3 70MHz 100pF 100pF 10uF 8200pF 8200pF 86pF 330nH 47nH 170MHz 100pF 100pF 10uF 8200pF 8200pF 33pF 100nH 18nH 240MHz 100pF 100pF 10uF 8200pF 8200pF 22pF 100nH 12nH 500MHz 100pF 100pF 10uF 8200pF 8200pF 10pF 100nH 4.7nH +5V C3 C4 L1 RFin C4 L2 BT09AG C5 RFout C5 C6 L1 L2 C6 BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 900 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% L1 RFin C4 L2 BT09AG C7 C5 RFout C6 L3 C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 100pF 1000pF 10uF 100pF 100pF 8pF 10pF 39nH 1.8nH 6.8nH Note: 1. PCB: 31mil thick FR4. 10uF 1000 pF 2. Distance between the center of the series inductor (L2) and the input pin of BT09AG _ 2.5mm. 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 3.5mm. 100pF 100 pF 1.8nH 100pF 8pF BT09AG BT013 39nH B B B 10pF 6.8nH 100pF 4. Distance between the center of the series cap(C7) and the output pin of BT09AG _ 3.5mm. 5. Distance between the center of the shunt inductor (L3) and the output pin of BT09AG _ 6.0mm. BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 1900MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% 5% 2% L1 RFin C4 BT09AG L2 C5 C6 C7 RFout C1 C2 C3 C4 C5 C6 C7 L1 L2 100pF 1000pF 10uF 100pF 100pF 2pF 1.2pF 39nH 1.2nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 1.0mm. 3. Distance between the center of the series inductor(L2) and the output pin of BT09AG _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT09AG _ 7.2mm. 1000 pF 100pF 100 pF BT09AG BT013 39nH 100pF 8pF B B B 1.2nH 1.2pF 100pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 2450MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% 5% L1 RFin C4 C7 BT09AG C5 C8 RFout C6 C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 1000pF 10uF 100pF 100pF 1pF 2.5pF 0.5pF 39nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the series cap(C7) and the input pin of BT09AG _ 2.5mm. 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 3.5mm. 4. Distance between the center of the shunt cap(C8) and the output pin of BT09AG _ 9.0mm. 1000 pF 100pF 100 pF 2.5pF 100pF 1pF BT09AG BT013 39nH B B B 100pF 0.5pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 3500MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% L1 RFin C4 C7 BT09AG C5 C8 RFout C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 1000pF 10uF 22pF 22pF 0.5pF 0.5pF 0.5pF 33nH C6 Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the series cap(C7) and the input pin of BT09AG _ 2.5mm. 22pF 1000 pF 100pF 100 pF 0.5pF 22pF 0.5pF BT09AG BT013 33nH B B B 0.5pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 9.2mm. 4. Distance between the center of the shunt cap(C8) and the output pin of BT09AG _ 8.0mm. Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 0.40 PCB Mounting Ø0.40 0.40 0.75 1.20 1.20 0.45 1.20 1.20 1.50 1.00 0.65 0.35 2.80 2.15 0.50 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1B Passes