LMV710M5

Product Folder Sample & Buy Support & Community Tools & Software Technical Documents LMV710-N, LMV711-N, LMV715-N SNOS519K – APRIL 2000 – REVISED AUGUST 2016 LMV71x-N Low-Power, RRIO Operational Amplifiers With High Output Current Drive and Shutdown Option 1 Features 3 Description • • • • • • • The LMV710-N, LMV711-N, and LMV715-N are BiCMOS operational amplifiers with a CMOS input stage. These devices have greater than RR input common mode voltage range, rail-to-rail output and high output current drive. They offer a bandwidth of 5 MHz and a slew rate of 5 V/µs. 1 • • • • Low Offset Voltage: 3 mV (Maximum) Gain-Bandwidth Product: 5 MHz (Typical) Slew Rate: 5 V/µs (Typical) Space-Saving Packages: 5-Pin and 6-Pin SOT-23 Turnon Time From Shutdown: 1 MΩ (unless otherwise noted) PARAMETER VOS Input offset voltage IB Input bias current CMRR PSRR Common-mode rejection ratio Power supply rejection ratio Input common-mode voltage range VCM TEST CONDITIONS VCM = 0.85 V and VCM = 1.85 V TYP (2) 0.4 TJ = –40°C to 85°C MAX (1) 3 3.2 4 50 TJ = –40°C to 85°C 45 2.7 V ≤ V+ ≤ 5 V, VCM = 0.85 V TJ = 25°C 70 TJ = –40°C to 85°C 68 2.7 V ≤ V+ ≤ 5 V, VCM = 1.85 V TJ = 25°C 70 0 V ≤ VCM ≤ 2.7 V For CMRR ≥ 50 dB Output short-circuit current Sinking, VO = 2.7 V VO TJ = 25°C TJ = 25°C Sourcing, VO = 0 V ISC MIN (1) TJ = –40°C to 85°C V– 15 TJ = –40°C to 85°C 12 TJ = 25°C 25 RL = 10 kΩ to 1.35 V VID = 100 mV RL = 10 kΩ to 1.35 V VID = –100 mV TJ = 25°C RL = 600 Ω to 1.35 V VID = 100 mV TJ = 25°C RL = 600 Ω to 1.35 V VID = –100 mV TJ = 25°C Output swing TJ = –40°C to 85°C dB 110 dB 95 –0.3 2.9 V 28 mA 40 22 2.62 2.68 2.6 0.01 TJ = –40°C to 85°C TJ = –40°C to 85°C pA 75 3 TJ = 25°C TJ = 25°C mV 68 –0.2 V+ TJ = –40°C to 85°C UNIT 0.12 0.15 2.52 2.55 V 2.5 0.05 TJ = –40°C to 85°C 0.23 0.3 VO(SD) Output voltage level in shutdown mode LMV711 only 50 IO(SD) Output leakage current in shutdown mode LMV715 only 1 pA CO(SD) Output capacitance in shutdown mode LMV715 only 32 pF IS Supply current ON mode TJ = 25°C 1.22 TJ = –40°C to 85°C SR Slew rate (3) GBWP Gain-bandwidth product φm Phase margin TON Turnon time from shutdown (1) (2) (3) 0.002 Sourcing, RL = 10 kΩ, VO = 1.35 V to 2.3 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Sinking, RL = 10 kΩ, VO = 0.4 V to 1.35 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Sourcing, RL = 600 Ω, VO = 1.35 V to 2.2 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Sinking, RL = 600 Ω, VO = 0.5 V to 1.35 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Large signal voltage 1.7 1.9 Shutdown mode, VSD = 0 V AV 200 10 mV mA µA 115 113 110 dB 100 5 V/µs 5 MHz 60 ° 1 MΩ (unless otherwise noted) PARAMETER TEST CONDITIONS VSD Shutdown pin voltage range en Input-referred voltage noise ON mode Shutdown mode MIN (1) TYP (2) MAX (1) 2.4 1.5 2.7 0 1 0.8 f = 1 kHz 20 UNIT V nV/√Hz 6.6 Electrical Characteristics – 3.2 V TJ = 25°C, V+ = 3.2 V, V− = 0 V, and VCM = 1.6 V (unless otherwise noted) PARAMETER IO = 6.5 mA VO MIN (1) TYP (2) TJ = 25°C 2.95 3 TJ = –40°C to 85°C 2.92 TEST CONDITIONS Output Swing TJ = 25°C 0.01 TJ = –40°C to 85°C (1) (2) MAX (1) 0.18 UNIT V 0.25 All limits are specified by testing or statistical analysis. Typical values represent the most likely parametric norm. 6.7 Electrical Characteristics – 5 V TJ = 25°C, V+ = 5 V, V− = 0 V, VCM = 2.5 V, and RL > 1 MΩ (unless otherwise noted) PARAMETER VOS Input offset voltage IB Input bias current CMRR PSRR Common-mode rejection ratio Power supply rejection ratio Input common-mode voltage range VCM TEST CONDITIONS VCM = 0.85 V and VCM = 1.85 V 0.4 3 TJ = 25°C TJ = –40°C to 85°C 3.2 4 50 TJ = –40°C to 85°C 48 2.7 V ≤ V+ ≤ 5 V, VCM = 0.85 V TJ = 25°C 70 TJ = –40°C to 85°C 68 2.7 V ≤ V+ ≤ 5 V, VCM = 1.85 V TJ = 25°C 70 0 V ≤ VCM ≤ 5 V For CMRR ≥ 50 dB Output short-circuit current Sinking, VO = 5 V VO MAX (1) TJ = 25°C Sourcing, VO = 0 V ISC MIN (1) TYP (2) TJ = –40°C to 85°C V– TJ = 25°C 25 TJ = –40°C to 85°C 21 TJ = 25°C 25 TJ = 25°C RL = 10 kΩ to 2.5 V VID = –100 mV TJ = 25°C RL = 600 Ω to 2.5 V VID = 100 mV TJ = 25°C RL = 600 Ω to 2.5 V VID = –100 mV TJ = 25°C Output swing 110 –0.3 V mA 40 4.98 4.9 TJ = –40°C to 85°C 0.12 0.15 4.82 4.85 V 4.8 0.05 TJ = –40°C to 85°C 0.23 0.3 VO(SD) LMV711 only 50 IO(SD) Output leakage current in shutdown mode LMV715 only 1 6 5.2 35 Output voltage level in shutdown mode (1) (2) dB 95 0.01 TJ = –40°C to 85°C dB 21 4.92 TJ = –40°C to 85°C pA 70 5.3 TJ = –40°C to 85°C mV 68 –0.2 V+ RL = 10 kΩ to 2.5 V VID = 100 mV UNIT 200 mV pA All limits are specified by testing or statistical analysis. Typical values represent the most likely parametric norm. Submit Documentation Feedback Copyright © 2000–2016, Texas Instruments Incorporated Product Folder Links: LMV710-N LMV715-N LMV710-N, LMV711-N, LMV715-N www.ti.com SNOS519K – APRIL 2000 – REVISED AUGUST 2016 Electrical Characteristics – 5 V (continued) TJ = 25°C, V+ = 5 V, V− = 0 V, VCM = 2.5 V, and RL > 1 MΩ (unless otherwise noted) PARAMETER CO(SD) Output capacitance in shutdown mode IS Supply current TEST CONDITIONS MIN (1) TYP (2) LMV715 only ON mode TJ = 25°C 1.17 TJ = –40°C to 85°C SR Slew rate (3) GBWP Gain-bandwidth product φm Phase margin TON Turnon time from shutdown VSD Shutdown pin voltage range en Input-referred voltage noise (3) 0.2 Sourcing, RL = 10 kΩ, VO = 2.5 V to 4.6 V 80 TJ = –40°C to 85°C 76 Sinking, RL = 10 kΩ, VO = 0.4 V to 2.5 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Sourcing, RL = 600 Ω, VO = 2.5 V to 4.5 V TJ = 25°C 80 TJ = –40°C to 85°C 76 Sinking, RL = 600 Ω, VO = 0.5 V to 2.5 V TJ = 25°C 80 TJ = –40°C to 85°C 76 ON mode Shutdown mode f = 1 kHz pF 1.7 mA 1.9 TJ = 25°C Large signal voltage gain UNIT 32 Shutdown mode AV MAX (1) 10 µA 123 120 dB 110 118 5 V/µs 5 MHz 60 °