SN74AC32N


     
 
SCAS528D − AUGUST 1995 − REVISED OCTOBER 2003 D 2-V to 6-V VCC Operation D Inputs Accept Voltages to 6 V D Max tpd of 7.5 ns at 5 V 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y 1Y NC 2A NC 2B 4B 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4A NC 4Y NC 3B 2Y GND NC 3Y 3A 1A 1B 1Y 2A 2B 2Y GND SN54AC32 . . . FK PACKAGE (TOP VIEW) 1B 1A NC VCC SN54AC32 . . . J OR W PACKAGE SN74AC32 . . . D, DB, N, NS, OR PW PACKAGE (TOP VIEW) NC − No internal connection description/ordering information The ’AC32 devices are quadruple 2-input positive-OR gates. The devices perform the Boolean function Y = A + B or Y = A • B in positive logic. ORDERING INFORMATION PDIP − N SN74AC32N Tube SN74AC32D Tape and reel SN74AC32DR SOP − NS Tape and reel SN74AC32NSR AC32 SSOP − DB Tape and reel SN74AC32DBR AC32 Tube SN74AC32PW Tape and reel SN74AC32PWR CDIP − J Tube SNJ54AC32J SNJ54AC32J CFP − W Tube SNJ54AC32W SNJ54AC32W LCCC − FK Tube SNJ54AC32FK SNJ54AC32FK TSSOP − PW −55°C 125°C −55 C to 125 C TOP-SIDE MARKING Tube SOIC − D −40°C 85°C −40 C to 85 C ORDERABLE PART NUMBER PACKAGE† TA SN74AC32N AC32 AC32 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each gate) INPUTS B OUTPUT Y H X H X H H L L L A Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2003, Texas Instruments Incorporated     ! "#$ !  %#&'" ($) (#"! "  !%$""! %$ *$ $!  $+! !#$! !(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!)  %(#"! "%'  /01 '' %$$! $ $!$( #'$!! *$,!$ $()  '' *$ %(#"! %(#" %"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!) POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 

     
 
SCAS528D − AUGUST 1995 − REVISED OCTOBER 2003 logic diagram, each gate (positive logic) A Y B absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) VCC VIH Supply voltage VCC = 3 V VCC = 4.5 V High-level input voltage VCC = 5.5 V VCC = 3 V VIL VI VO IOH IOL ∆t /∆v SN54AC32 SN74AC32 MIN MAX MIN MAX 2 6 2 6 2.1 2.1 3.15 3.15 3.85 3.85 VCC = 4.5 V VCC = 5.5 V Low-level input voltage Input voltage 0 Output voltage 0 High-level output current Low-level output current 0.9 0.9 1.35 1.65 1.65 0 0 VCC VCC VCC = 3 V VCC = 4.5 V −12 −12 −24 −24 VCC = 5.5 V VCC = 3 V −24 −24 12 12 VCC = 4.5 V VCC = 5.5 V 24 24 24 24 8 8 Input transition rise or fall rate V V 1.35 VCC VCC UNIT V V V mA mA ns / V TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 

     
 
SCAS528D − AUGUST 1995 − REVISED OCTOBER 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = −50 µA IOH = −12 mA VOH IOH = −24 mA A or B ports SN54AC32 SN74AC32 MIN MIN MAX 3V 2.9 2.9 2.9 4.5 V 4.4 4.4 4.4 5.5 V 5.4 5.4 5.4 3V 2.56 2.4 2.46 4.5 V 3.86 3.7 3.76 5.5 V 4.86 4.7 4.76 MAX 3V 0.002 0.1 0.1 0.1 IOL = 50 µA 4.5 V 0.001 0.1 0.1 0.1 5.5 V 0.001 0.1 0.1 0.1 3.85 5.5 V 3.85 3V 0.36 0.5 0.44 4.5 V 0.36 0.5 0.44 5.5 V 0.36 0.5 0.44 IOL = 50 mA† IOL = 75 mA† 5.5 V VI = VCC or GND VI = VCC or GND, 5.5 V UNIT V 5.5 V IOL = 24 mA II ICC TA = 25°C TYP MAX IOH = −50 mA† IOH = −75 mA† IOL = 12 mA VOL MIN V 1.65 5.5 V 1.65 ±0.1 IO = 0 5.5 V 2 Ci VI = VCC or GND 5V 2.6 † Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms. ±1 ±1 µA 40 20 µA pF switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V " 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A or B Y MIN TA = 25°C TYP MAX SN54AC32 SN74AC32 MIN MAX MIN MAX 1.5 7 9 1 12 1.5 10 1.5 7 8.5 1 11.5 1 9 UNIT ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V " 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A or B Y TA = 25°C MIN TYP MAX SN54AC32 SN74AC32 MIN MAX MIN MAX 1.5 5.5 7.5 1 9 1 8.5 1.5 5 7 1 8.5 1 7.5 UNIT ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance CL = 50 pF, POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 f = 1 MHz TYP UNIT 40 pF 3 

     
 
SCAS528D − AUGUST 1995 − REVISED OCTOBER 2003 PARAMETER MEASUREMENT INFORMATION TEST S1 tPLH/tPHL Open From Output Under Test CL = 50 pF (see Note A) S1 Open 50% VCC 50% VCC 0V tPHL tPLH 2 × VCC 500 Ω VCC Input (see Note B) In-Phase Output 50% VCC tPLH tPHL 500 Ω Out-of-Phase Output LOAD CIRCUIT VOH 50% VCC VOL 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-87614012A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596287614012A SNJ54AC 32FK 5962-8761401CA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8761401CA SNJ54AC32J Samples 5962-8761401DA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8761401DA SNJ54AC32W Samples SN74AC32D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SN74AC32DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SN74AC32DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SN74AC32N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 SN74AC32N Samples SN74AC32NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SN74AC32PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SN74AC32PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC32 Samples SNJ54AC32FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596287614012A SNJ54AC 32FK SNJ54AC32J ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8761401CA SNJ54AC32J Samples SNJ54AC32W ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8761401DA SNJ54AC32W Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1 Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2022 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of