SN74AHC245QPWRG4

SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 D D D D DW OR PW PACKAGE (TOP VIEW) Q Devices Meet Automotive Performance Requirements Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval Operating Range 2-V to 5.5-V VCC Latch-Up Performance Exceeds 250 mA Per JESD 17 DIR A1 A2 A3 A4 A5 A6 A7 A8 GND description The SN74AHC245Q octal bus transceiver is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC OE B1 B2 B3 B4 B5 B6 B7 B8 This device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION –40°C 40°C to 125°C ORDERABLE PART NUMBER PACKAGE† TA TOP-SIDE MARKING SOIC – DW Tape and reel SN74AHC245QDWR AHC245Q TSSOP – PW Tape and reel SN74AHC245QPWR HA245Q † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each transceiver) INPUTS OE DIR OPERATION L L B data to A bus L H A data to B bus H X Isolation Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 logic symbol† 19 OE 1 DIR 2 A1 G3 3 EN1 [BA] 3 EN2 [AB] 18 1 B1 2 A2 A3 A4 A5 A6 A7 A8 3 17 4 16 5 15 6 14 7 13 8 12 9 11 B2 B3 B4 B5 B6 B7 B8 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. logic diagram (positive logic) DIR 1 19 A1 2 18 To Seven Other Channels 2 OE POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 B1 SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1): Control inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V I/O, output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0): Control inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA I/O, output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±75 mA Package thermal impedance, θJA (see Note 2): DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) VCC VIH Supply voltage VCC = 2 V VCC = 3 V High-level input voltage VCC = 5.5 V VCC = 2 V MIN MAX 2 5.5 UNIT V 1.5 V 2.1 3.85 0.5 VIL Low-level input voltage VCC = 3 V VCC = 5.5 V VI VO Input voltage OE or DIR 0 5.5 V Output voltage A or B 0 V IOH High-level output current VCC = 2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V VCC –50 IOL ∆t/∆v Low-level output current Input transition rise or fall rate 0.9 V 1.65 –4 –8 VCC = 2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V 50 VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V 100 4 8 20 mA mA mA mA ns/V TA Operating free-air temperature –40 125 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –50 mA VOH IOH = –4 mA IOH = –8 mA IOL = 50 mA VOL IOL = 4 mA IOL = 8 mA A or B inputs II OE or DIR VI = 5.5 5 5 V or GND IOZ† VO = VCC or GND, VI (OE) = VIL or VIH ICC VI = VCC or GND, Ci OE or DIR Cio A or B inputs IO = 0 VI = VCC or GND VI = VCC or GND † The parameter IOZ includes the input leakage current. MIN TA = 25°C TYP MAX MIN 2V 1.9 2 1.9 3V 2.9 3 2.9 4.5 V 4.4 4.5 4.4 3V 2.58 4.5 V 3.94 VCC UNIT V 2.48 3.8 2V 0.1 0.1 3V 0.1 0.1 4.5 V 0.1 0.1 3V 0.36 0.5 4.5 V 0.36 0.5 5.5 V ±0.1 ±1 0 V to 5.5 V ±0.1 ±1 5.5 V ±0.25 ±2.5 mA 5.5 V 4 40 mA 5V 2.5 5V 4 switching characteristics over recommended operating VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) 4 MAX PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tPLH tPHL A or B B or A CL = 15 pF tPZH tPZL OE A or B CL = 15 pF tPHZ tPLZ OE A or B CL = 15 pF tPLH tPHL A or B B or A CL = 50 pF tPZH tPZL OE A or B CL = 50 pF tPHZ tPLZ OE A or B CL = 50 pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 free-air MIN 10 V mA pF pF temperature TA = 25°C TYP MAX MIN MAX 5.8 8.4 1 10 5.8 8.4 1 10 8.5 13.2 1 15.5 8.5 13.2 1 15.5 8.9 12.5 1 15.5 8.9 12.5 1 15.5 8.3 11.9 1 13.5 8.3 11.9 1 13.5 11 16.7 1 19 11 16.7 1 19 11.5 15.8 1 18 11.5 15.8 1 18 range, UNIT ns ns ns ns ns ns SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 switching characteristics over recommended operating VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tPLH tPHL A or B B or A CL = 15 pF tPZH tPZL OE A or B CL = 15 pF tPHZ tPLZ OE A or B CL = 15 pF tPLH tPHL A or B B or A CL = 50 pF tPZH tPZL OE A or B CL = 50 pF tPHZ tPLZ OE A or B CL = 50 pF free-air MIN temperature TA = 25°C TYP MAX MIN MAX 4 5.5 1 6.5 4 5.5 1 6.5 5.8 8.5 1 10 5.8 8.5 1 10 5.6 7.8 1 9.2 5.6 7.8 1 9.2 5.5 7.5 1 8.5 5.5 7.5 1 8.5 7.3 10.6 1 12 7.3 10.6 1 12 7 9.7 1 11 7 9.7 1 11 MIN TYP MAX range, UNIT ns ns ns ns ns ns noise characteristics, VCC = 5 V, CL = 50 pF, TA = 25°C (see Note 4) PARAMETER UNIT VOL(P) VOL(V) Quiet output, maximum dynamic VOL 0.9 V Quiet output, minimum dynamic VOL –0.9 V VOH(V) VIH(D) Quiet output, minimum dynamic VOH 4.3 V High-level dynamic input voltage 3.5 VIL(D) Low-level dynamic input voltage NOTE 4: Characteristics are for surface-mount packages only. V 1.5 V TYP UNIT operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance No load, POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 f = 1 MHz 14 pF 5 SN74AHC245Q OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SGDS018 – FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION From Output Under Test RL = 1 kΩ From Output Under Test Test Point S1 VCC Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS VCC 50% VCC Timing Input tw tsu VCC Input 50% VCC 50% VCC 0V th VCC 50% VCC Data Input 50% VCC 0V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATION VCC 50% VCC Input 50% VCC 0V tPLH In-Phase Output tPHL 50% VCC tPHL Out-of-Phase Output VOH 50% VCC VOL VCC Output Control Output Waveform 1 S1 at VCC (see Note B) 50% VCC 0V tPZL VOH 50% VCC VOL tPLZ ≈VCC 50% VCC tPZH tPLH 50% VCC 50% VCC Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + 0.3 V VOL tPHZ 50% VCC VOH – 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74AHC245QDWRG4Q1 ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM SN74AHC245QPWR ACTIVE TSSOP PW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM SN74AHC245QPWRG4 ACTIVE TSSOP PW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM AHC245Q1 -40 to 125 HA245Q HA245Q (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of