TL022CPS

TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 1OUT 1IN – 1IN + GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN – 2IN + TL022M . . . U PACKAGE (TOP VIEW) NC 1OUT 1IN – 1IN + VCC – TL022M IS NOT RECOMMENDED FOR NEW DESIGNS description The TL022 is a dual low-power operational amplifier designed to replace higher power devices in many applications without sacrificing system performance. High input impedance, low supply currents, and low equivalent input noise voltage over a wide range of operating supply voltages result in an extremely versatile operational amplifier for use in a variety of analog applications including battery-operated circuits. Internal frequency compensation, absence of latch-up, high slew rate, and output short-circuit protection assure ease of use. 1 10 2 9 3 8 4 7 5 6 NC VCC + 2OUT 2IN – 2IN + symbol (each amplifier) IN + OUT – D D D D D D TL022M . . . JG PACKAGE TL022C . . . D OR P PACKAGE (TOP VIEW) Very Low Power Consumption Power Dissipation With ± 2-V Supplies 170 µW Typ Low Input Bias and Offset Currents Output Short-Circuit Protection Low Input Offset Voltage Internal Frequency Compensation Latch-Up-Free Operation Popular Dual Operational Amplifier Pinout + D D IN – The TL022C is characterized for operation from 0°C to 70°C. The TL022M is characterized for operation over the full military temperature range of – 55°C to 125°C. AVAILABLE OPTIONS TA VIOmax AT 25°C 25 C 0°C to 70°C – 55°C to 125°C PACKAGE SMALL OUTLINE (D) CERAMIC DIP (JG) PLASTIC DIP (P) CERAMIC FLAT PACK (U) 5 mV TL022CD — TL022CP — 5 mV — TL022MJG — TL022MU The D package is available taped and reeled. Add the suffix R to the device type (i.e. TL022CDR). Copyright  1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 schematic OUT Common to Both Amplifiers Each Amplifier VCC + To Other Amplifier IN – IN + VCC – To Other Amplifier absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL022C TL022M UNIT Supply voltage, VCC+ (see Note 1) 18 22 V Supply voltage, VCC– (see Note 1) – 18 – 22 V Differential input voltage (see Note 2) ± 30 ± 30 V Input voltage (any input, see Notes 1 and 3) ± 15 ± 15 V Duration of output short circuit (see Note 4) unlimited unlimited Continuous total dissipation See Dissipation Rating Table 0 to 70 – 55 to 125 °C – 65 to 150 – 65 to 150 °C 300 °C Operating free-air temperature range Storage temperature range Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package NOTES: 1. 2. 3. 4. °C 260 All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC– . Differential voltages are at IN+ with respect to IN –. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output may be shorted to ground or either power supply. For the TL022M only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature. DISSIPATION RATING TABLE 2 PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70°C POWER RATING TA = 125°C POWER RATING D 680 mW 5.8 mW/°C 33°C 464 mW — JG 680 mW 8.4 mW/°C 69°C 672 mW 210 mW P 680 mW 8.0 mW/°C 65°C 640 mW — U 675 mW 5.4 mW/°C 25°C 432 mW 135 mW POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 recommended operating conditions MIN MAX Supply voltage, VCC + 5 15 UNIT V Supply voltage, VCC – –5 – 15 V electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) TL022C TEST CONDITIONS† PARAMETER MIN 25°C TYP 1 VIO Input offset voltage VO = 0,, RS = 50 Ω IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VO(PP) Maximum peak-to-peak output voltage swing RL = 10 kΩ 25°C 20 RL ≥ 10 kΩ Full range 20 AVD Large-signal g g differehtial voltage amplification RL ≥ 10 kΩ,, VO = ± 10 V 25°C 60 Full range 60 B1 Unity-gain bandwidth 25°C CMRR Common-mode rejection j ratio VIC = VICRmin,, RS = 50 Ω 25°C 60 Full range 60 kSVS Supply y voltage g sensitivity y (∆VIO /∆VCC) VCC = ± 9 V to ± 15 V,, RS = 50 Ω Vn Equivalent E i l t input i t noise i voltage AVD = 20 dB, dB B = 1 Hz, Hz IOS Short-circuit output current 25°C ±6 ICC Supply y current ((both amplifiers) VO = 0 0, No load 25°C 130 PD Total dissipation (both amplifiers) VO = 0, 0 No load Full range MIN 5 TYP MAX 1 5 7.5 25°C 15 Full range 6 80 5 200 25°C 100 Full range 25°C ± 12 ± 12 250 ± 13 50 ± 12 26 20 80 72 25°C 26 86 200 30 200 dB 50 130 mA 250 250 7.5 3.9 7.5 µV/V nV/Hz ±6 250 250 3.9 150 150 50 nA MHz 72 60 30 nA dB 0.5 60 mV V 66 72 UNIT V 20 Full range Full range ± 13 ± 12 Full range 25°C 100 250 0.5 25°C 40 100 400 Full range f = 1 kHz TL022M MAX 6 6 µA mW † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for TL022C is 0°C to 70°C and for TL022M is – 55°C to 125°C. operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER tr Rise time Overshoot factor SR Slew rate at unity gain TEST CONDITIONS MIN VI = 20 mV, mV RL = 10 kΩ kΩ, CL= 100 pF, pF See Figure 1 VI = 10 V, RL = 10 kΩ, CL= 100 pF, See Figure 1 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TYP 0.3 MAX UNIT µs 5% 0.5 V/µs 3 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 PARAMETER MEASUREMENT INFORMATION Output – VI Input + 0V INPUT VOLTAGE WAVEFORM CL = 100 pF RL = 2 kΩ TEST CIRCUIT Figure 1. Rise Time, Overshoot Factor, and Slew Rate TYPICAL CHARACTERISTICS TOTAL POWER DISSIPATION vs SUPPLY RATE – Total Power Dissipation – mW PPD D 10 No Load No Signal TA = 25°C 7 4 2 1 0.7 0.4 0.2 0.1 0 2 4 6 8 10 12 14 16 |VCC ± | – Supply Voltage – V Figure 2 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 18 20 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  1998, Texas Instruments Incorporated Product Folder: TL022, Dual Low-Power General-Purpose Operational Amplifier Home | Company Info | Employment | TI Global | Contact Us | Site Map • Advanced Search PRODUCT FOLDER | PRODUCT INFO: FEATURES | DESCRIPTION | DATASHEETS | PRICING/AVAILABILITY/PKG | SAMPLES | APPLICATION NOTES | USER MANUALS | RELATED SOFTWARE | RELATED DOCUMENTS PRODUCT SUPPORT: DEVELOPMENT TOOLS | APPLICATIONS TL022, Dual Low-Power General-Purpose Operational Amplifier DEVICE STATUS: ACTIVE PARAMETER NAME TL022 Number of Channels 2 Available Channels D Shutdown No Vs (max) (V) 30 Vs (min) (V) 10 IQ per channel (max) (mA) 0.125 GBW (typ) (MHz) 0.5 Slew Rate (typ) (V/us) 0.5 VIO (25 deg C) (max) (mV) 5 IIB (max) (pA) 250000 CMRR (min) (dB) 60 Vn at 1kHz (typ) (nV/rtHz) 50 Single Supply No FEATURES ● ● ● ● ● ● ● ● Back to Top Very Low Power Consumption Power Dissipation With ±2-V Supplies 170 uW Typ Low Input Bias and Offset Currents Output Short-Circuit Protection Low Input Offset Voltage Internal Frequency Compensation Latch-Up-Free Operation Popular Dual Operational Amplifier Pinout TL022M IS NOT RECOMMENDED FOR NEW DESIGNS DESCRIPTION Back to Top The TL022 is a dual low-power operational amplifier designed to replace higher power devices in many applications without sacrificing system performance. High input impedance, low supply currents, and low equivalent input noise voltage over a wide range of operating supply voltages result in an extremely versatile operational amplifier for use in a variety of analog applications including battery-operated circuits. Internal frequency compensation, absence of latch-up, high slew rate, and output short-circuit protection assure ease of use. The TL022C is characterized for operation from 0°C to 70°C. The TL022M is characterized for operation over the full military temperature range of -55°C to 125°C. file:///H|/imaging/BITTING/cpl/20020930_1/09272002_10/TXII/09272002_HTML/tl022.html (1 of 3) [Oct-05-2002 3:38:37 PM] Product Folder: TL022, Dual Low-Power General-Purpose Operational Amplifier Back to Top TECHNICAL DOCUMENTS To view the following documents, Acrobat Reader 4.0 is required. To download a document to your hard drive, right-click on the link and choose 'Save'. Back to Top DATASHEET Full datasheet in Acrobat PDF: tl022.pdf (87 KB) (Updated: 09/01/1990) Back to Top APPLICATION NOTES View Application Notes for Operational Amplifiers (Less than equal to 100MHz) ● ● AB-172: Current Feedback Amplifiers: Review, Stability Analysis,and Applications (SBOA081 - Updated: 11/20/2000) Analysis of the Sallen-Key Architecture (Rev. B) (SLOA024B - Updated: 09/13/2002) Back to Top RELATED DOCUMENTS ● ● ● Enhanced Plastic Portfolio Brochure (SGZB004, 385 KB - Updated: 08/19/2002) Military Analog Selection Guide (SGLB002, 318 KB - Updated: 11/09/2000) Military Semiconductors Selection Guide 2002 (Rev. B) (SGYC003B, 1648 KB - Updated: 04/22/2002) Back to Top USER MANUALS ● ● ● ● ● Universal Universal Universal Universal Universal Op Amp Single, Dual, Quad (SOIC) Evaluation Module With Shutdown (Rev. A) (SLOU061A, 457 KB - Updated: 03/20/2001) Operational Amplifier EVM (Rev. A) (SLVU006A, 387 KB - Updated: 03/22/1999) Operational Amplifier Evaluation Module Selection Guide (Rev. B) (SLOU060B, 20 KB - Updated: 03/20/2001) Operational Amplifier Single, Dual, Quad (MSOP/TSSOP) (SLOU055, 1196 KB - Updated: 10/22/1999) Operational Amplifier Single, Dual, Quad (PDIP) (Rev. A) (SLOU062A, 513 KB - Updated: 03/20/2001) Back to Top SAMPLES ORDERABLE DEVICE PACKAGE INDUSTRY (TI) PINS TL022CP PDIP (P) 8 TEMP (ºC) DEVICE INFORMATION STATUS TL022CD ACTIVE PACKAGE TYPE|PINS SOP | (D) PRODUCT CONTENT SAMPLES ACTIVE View Product Content Request Samples Back to Top TI INVENTORY STATUS AS OF 3:00 PM GMT, 26 Sep 2002 PRICING/AVAILABILITY/PKG ORDERABLE DEVICE STATUS 8 TEMP (ºC) PRODUCT CONTENT View Contents BUDGETARY PRICING QTY | $US 1KU | 0.95 STD PACK QTY IN STOCK 75 N/A* IN PROGRESS QTY|DATE >10k | 03 Oct LEAD TIME 5 WKS >10k | 10 Oct TL022CDR ACTIVE SOP | (D) 8 View Contents 1KU | 0.98 2500 N/A* >10k | 03 Oct 5 WKS >10k | 10 Oct TL022CP ACTIVE PDIP | (P) 8 View Contents 1KU | 0.95 50 N/A* >10k | 01 Oct 5 WKS 6300 | 03 Oct file:///H|/imaging/BITTING/cpl/20020930_1/09272002_10/TXII/09272002_HTML/tl022.html (2 of 3) [Oct-05-2002 3:38:37 PM] REPORTED DISTRIBUTOR INVENTORY AS OF 3:00 PM GMT, 26 Sep 2002 DISTRIBUTOR COMPANY|REGION IN STOCK PURCHASE Product Folder: TL022, Dual Low-Power General-Purpose Operational Amplifier >10k | 08 Oct TL022CPSR ACTIVE SOP | (PS) 8 0 TO 70 View Contents 1KU | 0.95 2000 N/A* 763 | 23 Sep 5 WKS 8590 | 07 Oct >10k | 14 Oct >10k | 21 Oct Back to Top DEVELOPMENT TOOLS Tool Part Number Tool Title Tool Type UNIV-OPAMP-GUIDE Universal EVM Selection Guide Development Boards/EVMs RELATED SOFTWARE ● ● Back to Top FilterPro Filter Design Programs for the UAF42 and Other Op Amps (SBFC001, 105 KB, ZIP - Updated: 10/25/2000) FilterPro MFB and Sallen-Key Design Program (Rev. A) (SLVC003A, 4314 KB, ZIP - Updated: 02/27/2002) Table Data Updated on: 9/26/2002 Products | Applications | Support | TI&ME © Copyright 1995-2002 Texas Instruments Incorporated. All rights reserved. Trademarks | Privacy Policy | Terms of Use file:///H|/imaging/BITTING/cpl/20020930_1/09272002_10/TXII/09272002_HTML/tl022.html (3 of 3) [Oct-05-2002 3:38:37 PM]