Product
Folder
Order
Now
Support &
Community
Tools &
Software
Technical
Documents
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
TS3A5018 10-Ω Quad SPDT Analog Switch
1 Features
•
•
•
•
•
•
1
•
3 Description
Low ON-State Resistance (10 Ω)
Low Charge Injection
Excellent ON-State Resistance Matching
Low Total Harmonic Distortion (THD)
1.8-V to 3.6-V Single-Supply Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Mode (A114-B, Class II)
– 1000-V Charged-Device Model (C101)
The TS3A5018 device is a quad single-pole doublethrow (SPDT) analog switch that is designed to
operate from 1.8 V to 3.6 V. This device can handle
digital and analog signals, and signals up to V+ can
be transmitted in either direction.
Device Information(1)
PART NUMBER
TS3A5018
2 Applications
•
•
•
•
Sample-and-Hold Circuits
Battery-Powered Equipment
Audio and Video Signal Routing
Communication Circuits
PACKAGE
BODY SIZE (NOM)
SOIC (16)
9.90 mm × 6.00 mm
SSOP (16)
6.00 mm × 4.90 mm
TSSOP (16)
5.00 mm × 4.40 mm
TVSOP (16)
4.40 mm × 3.60 mm
UQFN (16)
2.50 mm × 1.80 mm
VQFN (16)
4.00 mm × 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Block Diagram
EN
IN
COM
NC
NO
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Table of Contents
1
2
3
4
5
6
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
7
8
1
1
1
2
3
4
Absolute Maximum Ratings ..................................... 4
ESD Ratings ............................................................ 4
Recommended Operating Conditions....................... 4
Thermal Information .................................................. 4
Electrical Characteristics for 3.3-V Supply................ 5
Electrical Characteristics for 2.5-V Supply ............... 6
Electrical Characteristics for 2.1-V Supply................ 7
Electrical Characteristics for 1.8-V Supply................ 7
Switching Characteristics for 3.3-V Supply ............... 8
Switching Characteristics for 2.5-V Supply ............. 8
Switching Characteristics for 1.8-V Supply ............. 9
Typical Characteristics .......................................... 10
Parameter Measurement Information ................ 13
Detailed Description ............................................ 17
8.1
8.2
8.3
8.4
9
Overview .................................................................
Functional Block Diagram (Each Switch)................
Feature Description.................................................
Device Functional Modes........................................
17
17
17
17
Application and Implementation ........................ 18
9.1 Application Information............................................ 18
9.2 Typical Application ................................................. 18
10 Power Supply Recommendations ..................... 19
11 Layout................................................................... 19
11.1 Layout Guidelines ................................................. 19
11.2 Layout Example .................................................... 19
12 Device and Documentation Support ................. 20
12.1
12.2
12.3
12.4
12.5
12.6
12.7
Device Support ....................................................
Documentation Support .......................................
Receiving Notification of Documentation Updates
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
20
21
21
21
21
21
21
13 Mechanical, Packaging, and Orderable
Information ........................................................... 21
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision G (March 2015) to Revision H
Page
•
Changed the pinout images.................................................................................................................................................... 3
•
Changed the ron MAX value at 25°C From: 8 Ω To: 17 Ω in the Electrical Characteristics for 1.8-V Supply table................ 7
•
Changed the ron MAX value at Full From: 14.55 Ω To: 32 Ω in the Electrical Characteristics for 1.8-V Supply table........... 7
Changes from Revision F (June 2013) to Revision G
Page
•
Added Applications, Device Information table, Pin Functions table, ESD Ratings table, Thermal Information table,
Typical Characteristics, Feature Description section, Device Functional Modes, Application and Implementation
section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and
Mechanical, Packaging, and Orderable Information section. ................................................................................................. 1
•
Deleted Ordering Information table. ....................................................................................................................................... 1
2
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
5 Pin Configuration and Functions
D, DBQ, DGV and PW Package
16-Pin SOIC, SSOP, TVSOP and TSSOP
(Top View)
IN
1
16
V+
NC1
2
15
EN
NO1
3
14
NC4
COM1
4
13
NO4
NC2
5
12
COM4
NO2
6
11
NC3
COM2
7
10
NO3
GND
8
9
Logic Circuit
Logic
Control
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
COM3
Not to scale
12
COM4
6
11
NC3
COM2
7
10
NO3
COM3
GND
IN
V+
EN
14
13
NO4
NC2
3
10
NO2
4
9
COM4
NC3
9
5
8
NC2
NO2
NC4
11
8
NO4
12
2
NO3
13
Pad
1
7
Thermal
4
NO1
COM1
COM3
COM1
NC1
NC4
15
EN
14
16
15
3
6
2
5
NC1
NO1
GND
V+
16
RSV Package
16-Pin UQFN
(Top View)
COM2
IN
1
RGY Package
16-Pin VQFN
(Top View)
Not to scale
Not to scale
Pin Functions
PIN
NAME
SOIC, SSOP,
TVSOP, VQFN
NO.
UQFN NO.
COM1
4
2
I/O
Common path for switch
COM2
7
5
I/O
Common path for switch
TYPE
DESCRIPTION
COM3
9
7
I/O
Common path for switch
COM4
12
10
I/O
Common path for switch
EN
15
13
I
GND
8
6
—
IN
1
15
I
NC1
2
16
I/O
Normally closed path for switch
NC2
5
3
I/O
Normally closed path for switch
NC3
11
9
I/O
Normally closed path for switch
NC4
14
12
I/O
Normally closed path for switch
NO1
3
1
I/O
Normally open path for switch
NO2
6
4
I/O
Normally open path for switch
NO3
10
8
I/O
Normally open path for switch
NO4
13
11
I/O
Normally open path for switch
V+
16
14
—
Supply voltage
Active-low switch enable input
Ground
Switch path selector input
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
3
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1) (2)
V+
MIN
MAX
UNIT
Supply voltage (3)
–0.5
4.6
V
Analog voltage (3) (4)
–0.5
4.6
V
VNC
VNO
VCOM
IK
Analog port diode current
VNC, VNO, VCOM < 0
–50
mA
ON-state switch current
VNC, VNO, VCOM = 0 to 7 V
–64
64
–0.5
4.6
INC
INO
mA
ICOM
VI
Digital input voltage (3) (4)
IIK
Digital input clamp current
I+
Continuous current through V+
–100
100
mA
IGND
Continuous current through GND
–100
100
mA
Tstg
Storage temperature
–65
150
°C
(1)
(2)
(3)
(4)
VI < 0
–50
V
mA
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
6.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1)
±2000
Charged-device model (CDM), per JEDEC specification JESD22C101 (2)
±1000
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
VI/O
Switch input and output voltage
V+
Supply voltage
VI
Control input voltage
TA
Operating temperature
MAX
UNIT
0
V+
V
1.65
3.6
V
0
3.6
V
-40
85
°C
6.4 Thermal Information
TS3A5018
THERMAL METRIC
RθJA
(1)
4
(1)
Junction-to-ambient thermal resistance
D
(SOIC)
DBQ
(SSOP)
DGV
(TVSOP)
PW
(TSSOP)
RGY
(VQFN)
RSV
(UQFN)
16 PINS
16 PINS
16 PINS
16 PINS
16 PINS
16 PINS
73
90
120
108
51
184
UNIT
°C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
6.5 Electrical Characteristics for 3.3-V Supply
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) (1)
PARAMETER
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog
Switch
VCOM, VNO,
VNC
Analog signal range
ron
ON-state
resistance
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –32 mA,
Switch ON,
see Figure 17
Δron
ON-state
resistance match between
channels
VNC or VNO = 2.1 V,
ICOM = –32 mA,
Switch ON,
see Figure 17
ron(flat)
ON-state
resistance
flatness
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –32 mA,
Switch ON,
see Figure 17
VNC or VNO = 1 V,
VCOM = 3 V,
or
VNC or VNO = 3 V,
VCOM = 1 V,
Switch OFF,
see Figure 18
INC(OFF),
INO(OFF)
ICOM(OFF)
NC, NO
OFF leakage current
COM
OFF leakage current
0
25°C
Full
0.3
5
3V
Switch OFF,
see Figure 18
VCOM = 1 V,
VNC or VNO = 3 V,
or
VCOM = 3 V,
VNC or VNO = 3 V,
Switch OFF,
see Figure 18
Full
3.6 V
25°C
Full
25°C
VCOM = 0 to 3.6 V,
VNC or VNO = 3.6 V to
0,
or
VCOM = 3.6 V to 0,
VNC or VNO = 0 to 3.6
V,
Switch OFF,
see Figure 18
Full
3.6 V
0V
25°C
0.05
0.05
0.1
2
µA
0.1
0.2
0.05
–10
2
µA
10
INC(ON),
INO(ON)
NC, NO
ON leakage
current
VNC or VNO = 1 V,
VCOM = Open,
or
VNC or VNO = 3 V,
VCOM = Open,
Switch ON,
see Figure 19
ICOM(ON)
COM
ON leakage
current
VCOM = 1 V,
VNC or VNO = Open,
or
VCOM = 3 V,
VNC or VNO = Open,
Switch ON,
see Figure 19
VIH
Input logic high
Full
2
V+
V
VIL
Input logic low
Full
0
0.8
V
25°C
–1
Full
–0.1
Ω
10
–0.2
–2
Ω
0.2
–10
–0.1
25°C
Full
–0.2
–2
0V
0.05
Ω
7
8
–0.1
V
0.8
1
25°C
Full
10
12
3V
25°C
VNC or VNO = 0 to 3.6
V,
VCOM = 3.6 V to 0,
or
VNC or VNO = 3.6 V to
0,
VCOM = 0 to 3.6 V,
7
3V
25°C
Full
V+
3.6 V
25°C
Full
–0.2
–0.1
3.6 V
0.1
0.2
0.05
–0.2
0.1
0.2
0.05
µA
1
µA
IIH, IIL
Input leakage current
VI = V+ or 0
QC
Charge
injection
VGEN = 0,
RGEN = 0,
CL = 0.1 nF,
see Figure 26
25°C
3.3 V
2
pC
CNC(OFF),
CNO(OFF)
NC, NO
OFF
capacitance
VNC or VNO = V+ or
GND,
Switch OFF,
see Figure 20
25°C
3.3 V
4.5
pF
CCOM(OFF)
COM
OFF
capacitance
VCOM = V+ or GND,
Switch OFF,
see Figure 20
25°C
3.3 V
9
pF
CNC(ON),
CNO(ON)
NC, NO
ON
capacitance
VNC or VNO = V+ or
GND,
Switch ON,
see Figure 20
25°C
3.3 V
16
pF
CCOM(ON)
COM
ON
capacitance
VCOM = V+ or GND,
Switch ON,
see Figure 20
25°C
3.3 V
16
pF
(1)
Full
3.6 V
0.05
–1
1
µA
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
5
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Electrical Characteristics for 3.3-V Supply (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)(1)
PARAMETER
TEST CONDITIONS
TA
V+
See Figure 20
25°C
3.3 V
3
RL = 50 Ω,
Switch ON,
see Figure 22
25°C
3.3 V
300
MHz
OFF isolation
RL = 50 Ω,
f = 10 MHz,
Switch OFF,
see Figure 23
25°C
3.3 V
–48
dB
XTALK
Crosstalk
RL = 50 Ω,
f = 10 MHz,
Switch ON,
see Figure 24
25°C
3.3 V
–48
dB
XTALK(ADJ)
Crosstalk adjacent
RL = 50 Ω,
f = 10 MHz,
Switch ON,
see Figure 25
25°C
3.3 V
–81
dB
THD
Total harmonic distortion
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
see Figure 27
25°C
3.3 V
0.21%
I+
Positive supply current
VI = V+ or GND,
Switch ON or OFF
CI
Digital input
capacitance
VI = V+ or GND,
BW
Bandwidth
OISO
25°C
Full
MIN
TYP
MAX
pF
2.5
3.6 V
UNIT
7
10
µA
6.6 Electrical Characteristics for 2.5-V Supply
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) (1)
PARAMETER
TEST CONDITIONS
TA
V+
VCOM, VNC,
Analog signal range
VNO
ON-state
resistance
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –24 mA,
Switch ON,
see Figure 17
Δron
ON-state
resistance match
between channels
VNC or VNO = 1.6 V,
ICOM = –24 mA,
Switch ON,
see Figure 17
ron(flat)
ON-state
resistance
flatness
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –24 mA,
Switch ON,
see Figure 17
VNC or VNO = 0.5 V,
VCOM = 2.2 V,
or
VNC or VNO = 2.2 V,
VCOM = 0.5 V,
Switch OFF,
see Figure 18
ICOM(OFF)
NC, NO
OFF leakage current
COM
OFF leakage current
TYP
0
ron
INC(OFF),
INO(OFF)
MIN
25°C
Full
0.3
2.3 V
14
2.3 V
25°C
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0,
or
VNC or VNO = 3.6 V to 0,
VCOM = 0 to 3.6 V,
Switch OFF,
see Figure 18
VCOM = 0.5 V,
VNC or VNO = 2.2 V,
or
VCOM = 2.2 V,
VNC or VNO = 0.5 V,
Switch OFF,
see Figure 18
Full
2.7 V
25°C
Full
25°C
VCOM = 0 to 3.6 V,
VNC or VNO = 3.6 V to 0,
or
VCOM = 3.6 V to 0,
VNC or VNO = 0 to 3.6 V,
Switch OFF,
see Figure 18
Full
2.7 V
0V
Ω
0.1
2
µA
10
0.05
0.1
0.2
0.05
–10
2
µA
10
NC, NO
ON leakage
current
VNC or VNO = 0.5 V,
VCOM = Open,
or
VNC or VNO = 2.2 V,
VCOM = Open,
Switch ON,
see Figure 19
ICOM(ON)
COM
ON leakage
current
VCOM = 0.5 V,
VNC or VNO = Open,
or
VCOM = 2.2 V,
VNC or VNO = Open,
Switch ON,
see Figure 19
VIH
Input logic high
Full
1.7
V+
V
VIL
Input logic low
Full
0
0.7
V
6
Full
–0.1
Ω
INC(ON),
INO(ON)
(1)
25°C
0.05
–0.2
–2
Ω
0.2
–10
–0.1
25°C
Full
–0.2
–2
0V
0.05
V
18
20
–0.1
UNIT
1
2
25°C
Full
20
22
25°C
Full
V+
12
2.3 V
MAX
2.7 V
25°C
Full
–0.2
–0.1
2.7 V
0.05
–0.2
0.1
0.2
0.05
µA
0.1
0.2
µA
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
Electrical Characteristics for 2.5-V Supply (continued)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)(1)
PARAMETER
TEST CONDITIONS
TA
V+
25°C
TYP
MAX
0.05
0.1
UNIT
IIH, IIL
Input leakage current
VI = V+ or 0
QC
Charge
injection
VGEN = 0,
RGEN = 0,
CL = 0.1 nF,
see Figure 26
25°C
2.5 V
1
pC
CNC(OFF),
CNO(OFF)
NC, NO
OFF
capacitance
VNC or VNO = V+ or GND,
Switch OFF,
see Figure 20
25°C
2.5 V
3
pF
CCOM(OFF)
COM
OFF
capacitance
VCOM = V+ or GND,
Switch OFF,
see Figure 20
25°C
2.5 V
9
pF
CNC(ON),
CNO(ON)
NC, NO
ON
capacitance
VNC or VNO = V+ or GND,
Switch ON,
see Figure 20
25°C
2.5 V
16
pF
CCOM(ON)
COM
ON
capacitance
VCOM = V+ or GND,
Switch ON,
see Figure 20
25°C
2.5 V
16
pF
CI
Digital input
capacitance
VI = V+ or GND,
See Figure 20
25°C
2.5 V
3
pF
BW
Bandwidth
RL = 50 Ω,
Switch ON,
see Figure 22
25°C
2.5 V
300
MHz
OISO
OFF isolation
RL = 50 Ω,
f = 10 MHz,
Switch OFF,
see Figure 23
25°C
2.5 V
–48
dB
XTALK
Crosstalk
RL = 50 Ω,
f = 10 MHz,
Switch ON,
see Figure 24
25°C
2.5 V
–48
dB
XTALK(ADJ)
Crosstalk adjacent
RL = 50 Ω,
f = 10 MHz,
Switch ON,
see Figure 25
25°C
3.3 V
–81
dB
THD
Total harmonic
distortion
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
see Figure 27
25°C
2.5 V
0.33%
I+
Positive supply current
VI = V+ or GND,
Switch ON or OFF
Full
25°C
Full
2.7 V
MIN
–0.1
–1
2.5
2.7 V
µA
1
7
µA
10
6.7 Electrical Characteristics for 2.1-V Supply
V+ = 2.00 V to 2.20 V, TA = –40°C to 85°C (unless otherwise noted) (1)
PARAMETER
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
VIH
Input logic high
Full
1.2
4.3
V
VIL
Input logic low
Full
0
0.5
V
(1)
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
6.8 Electrical Characteristics for 1.8-V Supply
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) (1)
PARAMETER
TEST CONDITIONS
VCOM, VNC, VNO
Analog signal
range
ron
ON-state
resistance
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –32 mA,
Switch ON,
see Figure 17
Δron
ON-state
resistance match
between
channels
VNC or VNO = 1.5 V,
ICOM = –32 mA,
Switch ON,
see Figure 17
ron(flat)
ON-state
resistance
flatness
0 ≤ (VNC or VNO) ≤ V+,
ICOM = –32 mA,
Switch ON,
see Figure 17
(1)
TA
V+
MIN
TYP
0
25°C
Full
1.65 V
25°C
Full
Full
V+
5.5
0.3
UNIT
V
Ω
1
1.2
2.7
1.65 V
17
32
1.65 V
25°C
MAX
Ω
5.5
7.3
Ω
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
7
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Electrical Characteristics for 1.8-V Supply (continued)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)(1)
PARAMETER
INC(OFF),
INO(OFF)
ICOM(OFF)
NC, NO
OFF leakage
current
COM
OFF leakage
current
TEST CONDITIONS
VNC or VNO = 0.3 V,
VCOM = 1.65V,
or
VNC or VNO = 1.65V,
VCOM = 0.3 V,
TA
V+
25°C
Switch OFF,
see Figure 18
VNC or VNO = 1.95 V to 0 V,
VCOM = 0 V to 1.95 V,
or
VNC or VNO = 0 V to 1.95 V,
VCOM = 1.95 V to 0 V,
Switch OFF,
see Figure 18
VCOM = 1.65 V,
VNC or VNO = 0.3V,
or
VCOM = 0.3 V,
VNC or VNO = 1.65V,
Switch OFF,
see Figure 18
Full
1.95 V
25°C
Full
VCOM = 0 V to 1.95 V,
VNC or VNO = 1.95 V to 0 V,
or
VCOM = 1.95 V to 0,
VNC or VNO = 0 to 1.95 V,
Switch OFF,
see Figure 18
0V
INC(ON),
INO(ON)
NC, NO
ON leakage
current
VNC or VNO = 0.3 V,
VCOM = Open,
or
VNC or VNO = 1.65 V,
VCOM = Open,
Switch ON,
see Figure 19
1.95 V
ICOM(ON)
COM
ON leakage
current
VCOM = 0.3 V,
VNC or VNO = Open,
or
VCOM = 1.65 V,
VNC or VNO = Open,
Switch ON,
see Figure 19
VIH
Input logic high
VI = V+ or GND
VIL
Input logic low
IIH, IIL
Input leakage
current
0V
1.95 V
25°C
Full
–4.5
UNIT
4.5
0.01
–6.5
0.4
µA
6.5
0.02
–0.9
0.4
0.9
0.02
–4.5
0.4
µA
4.5
–2.
0.02
2
–2
0.02
2
–4.5
µA
4.5
1.95 V
µA
Full
1.95 V
1
3.6
V
Full
1.95 V
0
0.4
V
25°C
VI = V+ or 0
0.25
–0.4
25°C
Full
MAX
0.03
–0.4
25°C
Full
TYP
–0.4
25°C
Full
MIN
–0.25
Full
1.95 V
–0.1
0.01
–2.1
0.1
2.1
µA
6.9 Switching Characteristics for 3.3-V Supply
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
tON
Turnon time
VCOM = 2 V,
RL = 300 Ω,
CL = 35 pF,
see Figure 21
tOFF
Turnoff time
VCOM =2 V,
RL = 300 Ω,
CL = 35 pF,
see Figure 21
TA
V+
MIN
TYP
MAX
25°C
3.3 V
2.5
3.5
8
Full
3 V to
3.6 V
2.5
25°C
3.3 V
0.5
Full
3 V to
3.6 V
0.5
9
2
UNIT
ns
6.5
7
ns
6.10 Switching Characteristics for 2.5-V Supply
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
tON
Turnon time
VCOM = 1.5 V,
RL = 300 Ω,
CL = 35 pF,
see Figure 21
tOFF
Turnoff time
VCOM =1.5 V,
RL = 300 Ω,
CL = 35 pF,
see Figure 21
8
Submit Documentation Feedback
TA
V+
MIN
TYP
MAX
25°C
2.5 V
2.5
5
9.5
Full
2.3 V to
2.7 V
2.5
25°C
2.5 V
0.5
Full
2.3 V to
2.7 V
0.5
10.5
3
UNIT
ns
7.5
9
ns
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
6.11 Switching Characteristics for 1.8-V Supply
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Turnon time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
see Figure 21
tOFF
Turnoff time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
see Figure 21
tBBM
Break-beforemake time
VNC = VNO = V+/2,
RL = 50 Ω,
CL = 35 pF,
see Figure 21
tON
TA
V+
MIN
TYP
MAX
25°C
1.8 V
14.1
49.3
Full
1.65 V
to
1.95 V
49.3
56.7
25°C
1.8 V
16.1
26.5
Full
1.65 V
to
1.95 V
25°C
1.8 V
Full
1.65 V
to
1.95 V
31.2
5.3
18.4
Product Folder Links: TS3A5018
ns
ns
58
58
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
UNIT
ns
9
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
6.12 Typical Characteristics
18
10
TA = 25°C
16
14
8
V+ = 2.5 V
855C
255C
6
10
ron (W)
ron (Ω)
12
8
6
4
V+ = 3.3 V
4
–405C
2
2
0
0.0
0.5
1.0
1.5
2.0
VCOM (V)
2.5
3.0
3.5
0
0.0
0.5
1.5
2.0
VCOM (V)
2.5
3.0
3.5
Figure 2. ron vs VCOM (V+ = 2.5 V)
Figure 1. ron vs VCOM (V+ = 3.3 V)
40
40
Leakage Current (nA)
30
ICOM(ON)
20
INC(OFF)
ICOM(OFF)
INO(ON)
10
INO(OFF)
0
−60
INC_ON
INO_ON
ICOM_ON
INC_OFF
INO_OFF
ICOM_OFF
35
INC(ON)
Leakage Current (nA)
1.0
−40
−20
0
20
40
60
80
100
30
25
20
15
10
5
0
−60
−40
−20
TA (°C)
Figure 3. Leakage Current vs Temperature (V+ = 3.6 V)
0
20
40
Temperature (°C)
60
80
100
G005
Figure 4. Leakage Current vs Temperature (V+ = 1.8 V)
0.6
5
0.5
0.4
4
Charge Injection - pC
Charge Injection (pC)
0.3
V+ = 3.3 V
3
2
V+ = 2.5 V
1
0.2
0.1
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
0
0
1
2
3
4
VCOM (V)
Figure 5. Charge Injection (QC) vs VCOM
10
-0.6
0.0
0.2
0.4 0.6
0.8 1.0 1.2
VCOM - V
1.4 1.6
1.8
2.0
Figure 6. Charge Injection (QC) vs VCOM (V+ = 1.8 V)
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
Typical Characteristics (continued)
7
8
tON
6
5
tOFF
4
tON/tOFF (ns)
tON/tOFF (ns)
tON
7
6
3
2
5
tOFF
4
3
2
1
1
0
0
2.0
2.5
3.0
3.5
−40
4.0
25
TA (5C)
V+ (V)
Figure 8. tON and tOFF vs Temperature (V+ = 3.3 V)
Figure 7. tON and tOFF vs Supply Voltage
1.8
−1
1.4
−2
1.2
Gain (dB)
Logic Level Threshold (V)
0
TA = 25°C
1.6
85
1
0.8
0.6
−3
−4
−5
0.4
VIH
VIL
0.2
0
1.65 1.85 2.05 2.25 2.45 2.65 2.85 3.05 3.25 3.45 3.6
V+ (V)
G001
Figure 9. Logic-Level Threshold vs V+
−6
−7
1
10
100
1K
Frequency (MHz)
Figure 10. Gain vs Frequency Bandwidth (V+ = 3.3 V)
0
0
-10
-10
-20
-20
-30
-40
Gain - dB
Gain - dB
-30
-40
-50
-50
-60
-70
-60
-80
-70
-90
-80
-100
-90
-110
1
10
100
f - Frequency - MHz
1000
Figure 11. OFF Isolation vs Frequency (V+ = 1.8 V)
1
10
100
f - Frequency - MHz
1000
Figure 12. Crosstalk Adjacent vs Frequency (V+ = 1.8 V)
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
11
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Typical Characteristics (continued)
0
0
-10
−10
-20
−20
−30
Gain (dB)
Gain - dB
-30
-40
-50
-60
−40
−50
−60
−70
-70
−80
-80
−90
-90
1
10
100
f - Frequency - MHz
1
10
1000
4.0
0.40
3.5
0.35
3.0
0.30
2.5
0.25
2.0
I+ (µA)
THD (%)
0.45
0.20
0.15
1.5
1.0
0.10
0.5
0.05
0.0
100
1000
Frequency (MHz)
10 K
−40
100 K
25
85
TA (5C)
Figure 15. Total Harmonic Distortion vs Frequency
12
1k
Figure 14. OFF Isolation vs Frequency
(V+ = 3.3 V)
Figure 13. Crosstalk vs Frequency (V+ = 1.8 V)
0.00
10
100
Frequency (MHz)
Figure 16. Power-Supply Current vs Temperature
(V+ = 3.3 V)
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
7 Parameter Measurement Information
V+
VNC NC
COM
+
VCOM
Channel ON
VNO NO
r on =
IN or EN
VI
ICOM
VCOM – VNO or VNC
Ω
I COM
VI = VIH or VIL
+
GND
Figure 17. ON-State Resistance (ron)
V+
VNC NC
COM
+
VCOM
+
VNO NO
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
VNC or VNO = 0 to V+
and
VCOM =V+ to 0
IN or EN
VI
+
GND
Figure 18. OFF-State Leakage Current (ICOM(OFF), INC(OFF), INO(OFF))
V+
VNC NC
COM
+
VNO NO
VCOM
ON-State Leakage Current
Channel ON
VI = VIH or VIL
IN or EN
VI
+
GND
Figure 19. ON-State Leakage Current (ICOM(ON), INC(ON))
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
13
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Parameter Measurement Information (continued)
V+
Capacitance
Meter
VNC
NC
VNO
NO
VBIAS = V+ or GND
VI = VIH or VIL
VCOM COM
Capacitance is measured at NC,
NO, COM, and IN inputs during
ON and OFF conditions.
VBIAS
VI
IN or EN
GND
Figure 20. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNC(ON))
V+
NC or NO
VCOM (3)
VNC or VNO
TEST
RL
CL
tON
300 Ω
35 pF
tOFF
300 Ω
35 pF
COM
NC or NO
CL(2)
CL(2)
RL
RL
VI
IN or EN
Logic
Input(1)
V+
Logic
Input
(VI)
GND
50%
50%
0
tON
Switch
Output
(VNC)
tOFF
90%
90%
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
(2)
CL includes probe and jig capacitance.
(3)
See Electrical Characteristics for VCOM.
Figure 21. Turnon (tON) and Turnoff Time (tOFF)
V+
Network Analyzer
50 Ω
VNC
NC
Channel ON: NC to COM
COM
Source
Signal
VNO
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
IN or EN
50 Ω
VI
+
Source Power = 0 dBm
(632-mV P-P at 50- Ω load)
GND
DC Bias = 350 mV
Figure 22. Bandwidth (BW)
14
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
Parameter Measurement Information (continued)
V+
Network Analyzer
Channel OFF: NC to COM
50 Ω
VNC
NC
VI = V+ or GND
COM
Source
Signal
50
VNO
VCOM
NO
Network Analyzer Setup
IN or EN
Source Power = 0 dBm
(632-mV P-P at 50- Ω load)
VI
50 Ω
+
GND
DC Bias = 350 mV
Figure 23. OFF Isolation (OISO)
V+
Network Analyzer
Channel ON: NC to COM
50 Ω
VNC
NC
Channel OFF: NO to COM
VCOM
Source
Signal
VNO
NO
IN or EN
VI
50 Ω
VI = V+ or GND
+
Network Analyzer Setup
50 Ω
Source Power = 0 dBm
(632-mV P-P at 50- Ω load)
GND
DC Bias = 350 mV
Figure 24. Crosstalk (XTALK)
V+
Network Analyzer
50 Ω
VNC1
NC1
Source
Signal
Channel ON: NC to COM
COM1
VNC2 NC2
COM2
IN or EN
50 Ω
50 Ω
Network Analyzer Setup
Source Power = 0 dBm
(632 mV P-P at 50 Ω load)
VI
+
GND
DC Bias = 350 mV
Figure 25. Crosstalk Adjacent
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
15
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
Parameter Measurement Information (continued)
V+
RGEN
VIH
OFF
ON
OFF V
IL
NC or NO
COM
+
VGEN
Logic
Input
(VI )
VCOM
ΔVCOM
VCOM
NC or NO
CL(1)
VI
IN or EN
Logic
Input(2)
VGEN = 0 to V+
RGEN = 0
CL = 0.1 nF
QC = CL × ΔVCOM
VI = VIH or VIL
GND
(1)
CL includes probe and jig capacitance.
(2)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
Figure 26. Charge Injection (QC)
VI = VIH or VIL
Channel ON: COM to NC
VSOURCE = V+ P-P
fSOURCE = 20 Hz to 20 kHz
V+/2
V+
Audio Analyzer
RL
10 µ F
Source
Signal
10 µ F
NC
COM
600 Ω
600 Ω
NO
IN or EN
CL(1)
VI
+
GND
600 Ω
(1)
CL includes probe and jig capacitance.
Figure 27. Total Harmonic Distortion (THD)
16
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
8 Detailed Description
8.1 Overview
The TS3A5018 is a quad single-pole-double-throw (SPDT) solid-state analog switch. The TS3A5018, like all
analog switches, is bidirectional. When powered on, each COM pin is connected to its respective NC pin. For this
device, NC stands for normally closed and NO stands for normally open. The switch is enabled when EN is low.
If IN is also low, COM is connected to NC. If IN is high, COM is connected to NO.
The TS3A5018 is a break-before-make switch. This means that during switching, a connection is broken before a
new connection is established. The NC and NO pins are never connected to each other.
8.2 Functional Block Diagram (Each Switch)
EN
IN
COM
NC
NO
8.3 Feature Description
The low ON-state resistance, ON-state resistance matching, and charge injection in the TS3A5018 make this
switch an excellent choice for analog signals that require minimal distortion. In addition, the low THD allows
audio signals to be preserved more clearly as they pass through the device.
The 1.8-V to 3.6-V operation allows compatibility with more logic levels, and the bidirectional I/Os can pass
analog signals from 0 V to V+ with low distortion.
8.4 Device Functional Modes
Table 1. Function Table
IN
NO TO COM,
COM TO NO
L
L
OFF
ON
L
H
ON
OFF
H
X
OFF
OFF
EN
NC TO COM,
COM TO NC
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
17
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The TS3A5018 can be used in a variety of customer systems. The TS3A5018 can be used anywhere multiple
analog or digital signals must be selected to pass across a single line.
9.2 Typical Application
1.8 V
V+
EN
To/From
System
NC1
IN
C or System
Logic
NO1
COM1
NO4
COM4
To/From
System
NC4
GND
Figure 28. System Schematic for TS3A5018
9.2.1 Design Requirements
In this particular application, V+ was 1.8 V, although V+ is allowed to be any voltage specified in Recommended
Operating Conditions. A decoupling capacitor is recommended on the V+ pin. See Power Supply
Recommendations for more details.
9.2.2 Detailed Design Procedure
In this application, EN and IN are, by default, pulled low to GND. Choose these resistor sizes based on the
current driving strength of the GPIO, the desired power consumption, and the switching frequency (if applicable).
If the GPIO is open-drain, use pullup resistors instead.
9.2.3 Application Curve
0
-1
-2
Gain - dB
-3
-4
-5
-6
-7
-8
-9
-10
1
10
100
f - Frequency - MHz
1000
Figure 29. Gain vs Frequency Bandwidth (V+ = 1.8 V)
18
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
10 Power Supply Recommendations
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the
Recommended Operating Conditions.
Each VCC terminal should have a good bypass capacitor to prevent power disturbance. For devices with a single
supply, a 0.1-μF bypass capacitor is recommended. If there are multiple pins labeled VCC, then a 0.01-μF or
0.022-μF capacitor is recommended for each VCC because the VCC pins will be tied together internally. For
devices with dual supply pins operating at different voltages, for example VCC and VDD, a 0.1-µF bypass
capacitor is recommended for each supply pin. It is acceptable to parallel multiple bypass capacitors to reject
different frequencies of noise. 0.1-μF and 1-μF capacitors are commonly used in parallel. The bypass capacitor
should be installed as close to the power terminal as possible for best results.
11 Layout
11.1 Layout Guidelines
Reflections and matching are closely related to loop antenna theory, but different enough to warrant their own
discussion. When a PCB trace turns a corner at a 90° angle, a reflection can occur. This is primarily due to the
change of width of the trace. At the apex of the turn, the trace width is increased to 1.414 times its width. This
upsets the transmission line characteristics, especially the distributed capacitance and self–inductance of the
trace — resulting in the reflection. It is a given that not all PCB traces can be straight, and so they will have to
turn corners. Figure 30 shows progressively better techniques of rounding corners. Only the last example
maintains constant trace width and minimizes reflections.
Unused switch I/Os, such as NO, NC, and COM, can be left floating or tied to GND. However, the IN and EN
pins must be driven high or low. Due to partial transistor turnon when control inputs are at threshold levels,
floating control inputs can cause increased ICC or unknown switch selection states.
11.2 Layout Example
BETTER
BEST
2W
WORST
1W min.
W
Figure 30. Trace Example
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
19
TS3A5018
SCDS189H – JANUARY 2005 – REVISED MAY 2018
www.ti.com
12 Device and Documentation Support
12.1 Device Support
12.1.1 Device Nomenclature
Table 2. Parameter Description
SYMBOL
VCOM
VNC
Voltage at NC
VNO
Voltage at NO
ron
Δron
ron(flat)
Resistance between COM and NC or NO ports when the channel is ON
Difference of ron between channels in a specific device
Difference between the maximum and minimum value of ron in a channel over the specified range of conditions
INC(OFF)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state
INC(ON)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output
(COM) open
INO(OFF)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state
INO(ON)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output
(COM) open
ICOM(OFF)
Leakage current measured at the COM port, with the corresponding channel (COM to NC or NO) in the OFF state
ICOM(ON)
Leakage current measured at the COM port, with the corresponding channel (COM to NC or NO) in the ON state and the
output (NC or NO) open
VIH
Minimum input voltage for logic high for the control input (IN, EN)
VIL
Maximum input voltage for logic low for the control input (IN, EN)
VI
Voltage at the control input (IN, EN)
IIH, IIL
Leakage current measured at the control input (IN, EN)
tON
Turnon time for the switch. This parameter is measured under the specified range of conditions and by the propagation
delay between the digital control (IN) signal and analog output NC or NO) signal when the switch is turning ON.
tOFF
Turnoff time for the switch. This parameter is measured under the specified range of conditions and by the propagation
delay between the digital control (IN) signal and analog output (NC or NO) signal when the switch is turning OFF.
QC
Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC or NO)
output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input.
Charge injection, QC = CL × ΔVCOM, CL is the load capacitance and ΔVCOM is the change in analog output voltage.
CNC(OFF)
Capacitance at the NC port when the corresponding channel (NC to COM) is OFF
CNC(ON)
Capacitance at the NC port when the corresponding channel (NC to COM) is ON
CNO(OFF)
Capacitance at the NC port when the corresponding channel (NO to COM) is OFF
CNO(ON)
Capacitance at the NC port when the corresponding channel (NO to COM) is ON
CCOM(OFF)
Capacitance at the COM port when the corresponding channel (COM to NC) is OFF
CCOM(ON)
Capacitance at the COM port when the corresponding channel (COM to NC) is ON
CI
Capacitance of control input (IN, EN)
OISO
OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific
frequency, with the corresponding channel (NC to COM) in the OFF state.
XTALK
Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC1 to NO1). Adjacent
crosstalk is a measure of unwanted signal coupling from an ON channel to an adjacent ON channel (NC1 to NC2) .This is
measured in a specific frequency and in dB.
BW
Bandwidth of the switch. This is the frequency in which the gain of an ON channel is –3 dB below the DC gain.
THD
Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root
mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the fundamental
harmonic.
I+
20
DESCRIPTION
Voltage at COM
Static power-supply current with the control (IN) pin at V+ or GND
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
TS3A5018
www.ti.com
SCDS189H – JANUARY 2005 – REVISED MAY 2018
12.2 Documentation Support
12.2.1 Related Documentation
For related documentation, see the following:
• Implications of Slow or Floating CMOS Inputs, SCBA004
12.3 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
12.4 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.5 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.6 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.7 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Submit Documentation Feedback
Copyright © 2005–2018, Texas Instruments Incorporated
Product Folder Links: TS3A5018
21
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
TS3A5018D
ACTIVE
SOIC
D
16
40
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
TS3A5018
Samples
TS3A5018DBQR
ACTIVE
SSOP
DBQ
16
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
YA018
Samples
TS3A5018DBQRG4
ACTIVE
SSOP
DBQ
16
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
YA018
Samples
TS3A5018DE4
ACTIVE
SOIC
D
16
40
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
TS3A5018
Samples
TS3A5018DGVR
ACTIVE
TVSOP
DGV
16
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
YA018
Samples
TS3A5018DR
ACTIVE
SOIC
D
16
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
TS3A5018
Samples
TS3A5018PW
ACTIVE
TSSOP
PW
16
90
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
YA018
Samples
TS3A5018PWG4
ACTIVE
TSSOP
PW
16
90
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
YA018
Samples
TS3A5018PWR
ACTIVE
TSSOP
PW
16
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
YA018
Samples
TS3A5018PWRE4
ACTIVE
TSSOP
PW
16
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
YA018
Samples
TS3A5018RGYR
ACTIVE
VQFN
RGY
16
3000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
YA018
Samples
TS3A5018RSVR
ACTIVE
UQFN
RSV
16
3000
RoHS & Green NIPDAU | NIPDAUAG
Level-1-260C-UNLIM
-40 to 85
ZUN
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
