CLE535

CLE535 ® Preliminary Clairex March, 2006  High Power Green LED Dome Lens Can, Hermetically Sealed 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 1.00 (25.4) min. Technologies, Inc. 0.100 (2.54) dia. 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) (connected to case) ANODE 0.025 (0.64) max. 0.050 (1.27) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features • Dome lens TO-46 package • ± 11° emitting angle • High luminous intensity • High luminous flux • cathode connected to case • RoHS compliant description The CLE535 contains a GaN, high power output, green LED mounted on a TO-46 header. The TO-46 header provides the thermal environment for reliable operation over a wide temperature range. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature........................................................................-65°C to +150°C operating temperature.....................................................................-65°C to +125°C lead soldering temperature(1) .......................................................................... 260°C (2) continuous forward current ............................................................................55mA reverse voltage ..................................................................................................5.0V peak forward current (1.0ms pulse width, 10% duty cycle) ..............................0.25A continuous power dissipation(3) .....................................................................200mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum. 2. Derate linearly 0.44mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.60mW/°C from 25°C free air temperature to TA = +125°C. Case 7 electrical characteristics (TA = 25°C unless otherwise noted) symbol IV ΦV VF IR ΘHP λp parameter Luminous intensity Luminous flux Forward voltage Reverse current Emission angle at half power points Peak Wavelength min 520 typ 10,500 1,200 3.2 22 530 max 3.6 10 540 units mcd mlm V µA deg. nm test conditions IF = 20mA IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/20/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com