LME-2000V-T2000K

rev. page 1 of 5 date 01/2009 DESCRIPTION: modular incremental encoder PART NUMBER: LME The LME Series are high performance, low cost, 3 channel optical incremental encoders. Each encoder contains a LED source, an integrated circuit with detectors and circuitry, and an optical disc which rotates between the emitter and detector IC. These encoders can be quickly and easily mounted to a motor. ELECTRICAL SPECIFICATIONS output waveform output signals current consumption output phase difference supply voltage output resolution (ppr) frequency response output current Square wave A, B, Z phase ≤ 60 mA 90° ± 45° 5 V dc 1000, 1024, 2000, 2048 (other resolutions available upon request) 0~100 KHz 0~5 mA MECHANICAL SPECIFICATIONS 6.0x10-8 kgm2 980 m/s2 ,6ms, 2 times each on XYZ 50 m/s2 ,10~200 Hz, 2 hours each on XYZ MTBF ≥ 5000h(+25°C, 2000rpm) 25g (with 0.5 meter cable) rotor inertia of code-wheel shock resistance vibration proof working life weight ENVIRONMENTAL SPECIFICATIONS operating temp storage temp humidity protection -25° to +85° C -40° to +85° C 30~85% no condensation IP50 ORDERING INSTRUCTIONS LME - XXXXX - XXXXXX Resolution: 1000 = 1000 PPR 1024 = 1024 PPR 2000 = 2000 PPR 2048 = 2048 PPR Output type: D = line driver 26LS31 V = voltage Bore type: “blank” = standard T = thru bore Bore size: 600 = 6mm 635 = 6.35mm (1/4”) 800 = 8mm 1000 = 10mm 1400 = 14mm 1900 = 19mm 2000 = 20mm "blank" = no kit K = kit (Digi-Key only): contains encoder, centering tool, and Allen wrench 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 rev. page 2 of 5 date 01/2009 DESCRIPTION: modular incremental encoder PART NUMBER: LME OUTPUT WAVEFORM T(TD) X X2 X3 •Square-wave accuracy: X4 •Pitch error of period: •Pitch error of phase position: •Z phase: •Period of pulses: •Signal accuracy: A B X1 +X2 = 1/2T ± 1/12T X3 +X4 = 1/2T ± 1/12T ±0.01T ≤ 1/18T Tz=1/4T (1T, 1/2T, 1/4T...) T=360° /N (N: output pulses) Xn=1/4T ± 1/12T (n=1, 2, 3, 4) A leads B clockwise when viewing the encoder shaft end. The position of Z phase against A, B phase is not specified. Z Tz T X1 Voltage output VCC 20Ω X2 A Output B 0V Z Tz Line driver output T H Q AM26LS31 OUT A L OUT A H L Q X1 Q = A.B.Z Q = A.B.Z X2 H OUT B L OUT B H L H OUT Z L OUT Z H Tz L 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 rev. PART NUMBER: LME page 3 of 5 date 01/2009 DESCRIPTION: modular incremental encoder INSTALLATION DRAWING 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 REV. A 56.0 2.205 DESCRIPTION NEW DRAWING 17.0 0.669 A DATE 4/15/2008 46.0 1.811 0.05 2.0 0.079 3.3 0.130 (2 PLCS) CODE WHEEL 25.91 1.020 B 66.0 2.597 24.38 0.960 2.4 0.094 (2 PLCS) 3.0 0.118 A 30.0 1.181 SECTION A-A 500.0 19.685 5.0 0.197 RoHS 3.0 0.118 (8 PLCS) ØB (bore size) 6mm 6.35mm 8mm 10mm 14mm 19mm LME - STANDARD BORE COPYRIGHT 2008 BY CUI INC. 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED -0.00 +0.033 20mm PC FILE NAME: SCALE 1:2 tolerance Cable Code Cable Color Line Driver Output Cable Code Cable Color Voltage Output 1 Black 0V 1 Black 0V 2 Red Vcc 2 Yellow Z 3 Green A 3 Green A 4 Brown _ A 4 Red Vcc 5 White B 5 White B 6 Grey _ B - 7 Yellow Z - 8 Orange _ Z - TITLE: LME - MODULAR OPTICAL ENCODER PART NO. LME - STANDARD BORE DRAWN BY: ZRJ - APPROVED BY: UNITS: REV: A MM [INCHES] SCALE: 1:1 REV. A THRU HOLE VERSION 56.0 2.205 DESCRIPTION NEW DRAWING 17.0 0.669 A DATE 4/15/2008 46.0 1.811 0.05 2.0 0.079 A CODE WHEEL 3.3 0.130 (2 PLCS) 25.91 1.020 B 66.0 2.597 24.38 0.960 2.4 0.094 (2 PLCS) 3.0 0.118 A 30.0 1.181 SECTION A-A 500.0 19.685 5.0 0.197 RoHS 3.0 0.118 (8 PLCS) ØA (case opening) ØB (bore size) 11mm 15mm 20mm 6mm 6.35mm 8mm 10mm 14mm 19mm 21mm 20mm 10mm SCALE 1:2 tolerance -0.00 +0.033 PC FILE NAME: LME-THROUGH BORE COPYRIGHT 2009 BY CUI INC. 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED Cable Code Cable Color Line Driver Output Cable Code Cable Color Voltage Output 1 Black 0V 1 Black 0V 2 Red Vcc 2 Yellow Z 3 Green A 3 Green A 4 Brown _ A 4 Red Vcc 5 White B 5 White B 6 Grey _ B - 7 Yellow Z - 8 Orange _ Z - TITLE: LME - MODULAR OPTICAL ENCODER PART NO. LME-THROUGH BORE DRAWN BY: ZRJ APPROVED BY: REV: A UNITS: MM [INCHES] SCALE: 1:1