BAW101V-7

BAW101V HIGH VOLTAGE DUAL SWITCHING DIODE Features • • • • Fast Switching Speed: Maximum of 50ns High Reverse Breakdown Voltage: 325V for Single Diode or 650V for Series Connection Two Electrically Isolated Elements in a Single Compact Package Low Leakage Current: Maximum of 50nA when VR = 5V or Maximum of 150nA when VR = 250V at Room Temperature Thermally Efficient Copper Alloy leadframe for High Power Dissipation Lead, Halogen and Antimony Free, RoHS Compliant (Note 3) "Green" Device (Note 4) Mechanical Data • • • • • • • Case: SOT-563 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.006 grams (approximate) NEW PRODUCT • • • 6 5 4 1 2 3 Top View Bottom View Device Schematic Maximum Ratings @TA = 25°C unless otherwise specified Symbol Single Diode Series Connection Single Diode Series Connection VRRM VRWM VR VR(RMS) IF IFSM IFRM Value 325 650 325 650 230 250 140 8.0 3.0 Unit V V V mA A A Characteristic Repetitive Peak Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Forward Current (Note 2) Single Diode Loaded Double Diode Loaded Non-Repetitive Peak Forward Surge Current @ t = 1.0μs Repetitive Peak Forward Current @ t = 8.3ms (Note 2) Thermal Characteristics Characteristic Power Dissipation (Note 2) Thermal Resistance Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Symbol PD RθJA TJ, TSTG Value 500 250 -55 to +150 Unit mW °C/W °C Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) Forward Voltage Reverse Current (Note 1) Total Capacitance Reverse Recovery Time Notes: @TA = 25°C unless otherwise specified Symbol V(BR)R VF IR CT trr Min 300 ⎯ ⎯ ⎯ ⎯ Max ⎯ 1.1 50 150 50 2.0 50 ⎯ ⎯ Unit V V nA nA μA pF ns Test Condition IR = 100μA IF = 100mA V R = 5V VR = 250V VR = 250V, TJ = 150°C VR = 0, f = 1.0MHz IF = IR = 30mA, Irr = 0.1 x IR, RL = 100Ω 1. Short duration pulse test used to minimize self-heating effect. 2. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 3. No purposefully added lead. Halogen and Antimony Free. 4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. BAW101V Document number: DS32178 Rev. 4 - 2 1 of 4 www.diodes.com September 2010 © Diodes Incorporated BAW101V 500 450 PD, POWER DISSIPATION (mW) Note 2 400 350 300 250 200 150 100 50 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Power Derating Curve, Total Package IF, INSTANTANEOUS FORWARD CURRENT (mA) 1,000 100 NEW PRODUCT 10 1 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, Per Element 1.2 0 IR, INSTANTANEOUS REVERSE CURRENT (nA) 100,000 TA = 150ºC TA = 125ºC CT, TOTAL CAPACITANCE (pF) 10,000 1.0 1,000 TA = 8 5ºC 0.8 100 0.6 10 TA = 25ºC T A = -55ºC 0.4 1 0.2 0.1 0 50 100 150 200 250 300 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics, Per Element 0 0 10 20 30 40 Ordering Information (Notes 5 & 6) Part Number BAW101V-7 Notes: Case SOT-563 Packaging 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 6. Package is non-polarized. Parts may be on reel in orientation illustrated, 180° rotated, or mixed (both ways). Marking Information Date Code Key Year Code Month Code 2010 X Jan 1 Feb 2 2011 Y Mar 3 Apr 4 2012 Z May 5 Jun 6 BAW101V Document number: DS32178 Rev. 4 - 2 2 of 4 www.diodes.com K95 YM K95 YM OR K95 YM K95 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: X = 2010) M = Month (ex: 9 = September) 2013 A Jul 7 2014 B Aug 8 Sep 9 2015 C Oct O Nov N 2016 D Dec D September 2010 © Diodes Incorporated BAW101V Package Outline Dimensions A NEW PRODUCT B C D G K M SOT-563 Dim Min Max Typ A 0.15 0.30 0.20 B 1.10 1.25 1.20 C 1.55 1.70 1.60 D 0.50 G 0.90 1.10 1.00 H 1.50 1.70 1.60 K 0.55 0.60 0.60 L 0.10 0.30 0.20 M 0.10 0.18 0.11 All Dimensions in mm H L Suggested Pad Layout C2 C2 Z G C1 Y X Dimensions Value (in mm) Z 2.2 G 1.2 X 0.375 Y 0.5 C1 1.7 C2 0.5 BAW101V Document number: DS32178 Rev. 4 - 2 3 of 4 www.diodes.com September 2010 © Diodes Incorporated BAW101V IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com BAW101V Document number: DS32178 Rev. 4 - 2 4 of 4 www.diodes.com September 2010 © Diodes Incorporated