5017C

DATASHEET | JANUARY 2, 2008 5017-Series Delay Line With Fully Integrated Fiber Optics The 5017-Series Delay System delivers unmatched performance for radar testing, signal processing, phased antenna array, and phase noise testing. The 5017 also provides unmatched convenience and robustness because of its fully integrated fiber optics. All the fiber interfaces are reliably fusion spliced internal to the box, thus eliminating any handling and maintenance of optical connectors. The user only needs to provide +5 and +15 volts, then plug in his RF connectors. Emcore’s fiber-optic transceivers provide bandwidth that is essentially independent of fiber length, loss or delay, and triple transit signals that are immeasurable. In addition to enhanced electrical performance, the delay lines provide several mechanical advantages. The small size of these components allows for a long delay in a compact package with the superior temperature stability of fiber. Emcore’s technology takes advantage of the rigid yet flexible properties of fiber-optic cable to provide repeatable enhanced phase and group delay characteristics. Emcore’s Model 5017 consists of directly modulated DFB lasers and photodiodes fabricated with mature, field-proven Ortel technology. Performance Highlights Min W avelength Options 1290 Typical Max 1580 110 -25 0.1 +65 10 - 18 Units nm µ-sec °C GHz Applications Radar testing/calibration Signal processing Phased array antennas Phase noise testing Features Bandwidth to 18 GHz High dynamic range Built-in optical isolator 1310 nm Up to 110 µ-sec Integrated fiber Internal Delay Spool Temperature Range Frequency Range See following pages for complete specifications and conditions. For more information on this and other products: Contact Sales at Emcore 626-293-3400, or visit www.emcore.com. 5017-Series Delay Line DATA SHEET | JANUARY 2, 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Operating Temperature Range of Baseplate: Storage Temperature RF Input Power ESD, module TEC Current, module Symbol TOP TSTG PIN ITEC Condition continuous 60 seconds HBM: R = 1500 Ohm, C = 100 pF continuous Min -55 -55 -500 -1.9 Max +75 +85 20 500 1.9 Units °C °C dBm V A RF Characteristics Parameter Upper Band Edge Frequency Lower Band Edge Frequency Amplitude Flatness Noise Figure Max Delay Time Insertion Loss Input / Output Return Loss Input Third Order Intercept Impedance Input 1 dB Compression Triple Transit Response 9 +30 28 6 +25 50 +20