6925WD-SDSP-8

Force Optical Broadcast Systems CWDM Model 6925 • Request Pricing • Download User Manual Coarse Wavelength-division Multiplexer Model 6925 offers low insertion loss and polarization-dependent loss. High channel-to-channel uniformity allows excellent stability and reliability. Great for use in high-speed communication and long-haul telecommunication networks. Extends the capacity of existing networks. Model 6925 CWDM The Force Model 6925 Coarse Wavelength-division Multiplexer (CWDM) is an all-fiber, bidirectional multiplexer/demultiplexer. The CWDM allows four, six, or eight channels to be stacked in the 1550 nm region of optical fiber. The Model 6925 features low insertion loss and low polarization-dependent loss. The units operate using single-mode fiber, and may be configured for unidirectional or bidirectional four, six, or eight channel transmission. The Model 6925 implements higher channel-to-channel isolation to ensure that no interference occurs between channels in a bidirectional configuration. CWDM technology increases the capacity of the embedded fibers, allowing multiple video, audio, and data channels to be transmitted over one fiber, while maintaining system performance and enhancing transport systems. The Model 6925 is an excellent choice for addressing the increased need for efficient and capable data transmission. Model 3000 Tx, 1511 nm Model 3000 Tx, 1531 nm Model 3000 Tx, 1551 nm Transmission Fiber (35 km) Model 3000 Rx, 15114 nm Model 3000 Rx, 1531 nm 6925WM-SDSP/4 CWDM Mux 6925WM-SDSP/4 CWDM Mux Model 3000 Rx, 1551 nm Model 3000 Tx, 1571 nm Model 3000 Rx, 1571 nm 825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •csr-sales@forceinc.com • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved. Specifications and Ordering Information Optical Characteristics* Min 4 Channel Models Typ Max Units Optical Characteristics cont.* Min 8 Channel Models Center Wavelengths 0.5 dB Passband Ripple of Passband Insertion Loss Channel Uniformity (1) Isolation of Adjacent Ch. Isolation of Non-Adjacent Ch. Directivity Polarization Dependent Loss Return Loss PMD Thermal Stability Optical Power Typ Max Units Center Wavelengths 0.5 dB Passband Ripple of Passband Insertion Loss Channel Uniformity (1) Isolation of Adjacent Ch. Isolation of Non-Adjacent Ch. Directivity Polarization Dependent Loss Return Loss PMD Thermal Stability Optical Power 6 Channel Models 1511, 1531, 1551, 1571 15 0.4 2.0 2.5 1.2 25 40 55 0.1 45 0.1 0.006 250 1471, 1491, 1511, 1531 1551, 1571 CW ±7 0.3 2.8 3.4 1.2 28 40 50 0.2 45 0.1 0.006 250 nm dB dB dB dB dB dB dB dB dB ps dB/°C mW 1471, 1491, 1511, 1531 1551, 1571, 1591, 1611 15 0.4 3.6 4.5 1.5 25 40 55 0.2 45 0.1 0.007 250 nm nm dB dB dB dB dB dB dB dB ps dB/°C mW Center Wavelengths 0.5 dB Passband Ripple of Passband Insertion Loss Channel Uniformity (1) Isolation of Adjacent Ch. Isolation of Non-Adjacent Ch. Directivity Polarization Dependent Loss Return Loss PMD Thermal Stability Optical Power nm nm dB dB dB dB dB dB dB dB ps dB/°C mW Environmental and Physical Characteristics* Operating Temp. Range Storage Temp. Range Humidity Weight Dimensions Min 0 -40 5 Typ Max +65 +85 90 Units °C °C % lbs kg in. 5.5 2.4 19.0 x 1.75 x 11.8 483 x 45 x 300 mm (1) Channel uniformity is given at the center wavelength. Model 6925 CWDM Front and Rear Panel Views CWDM and Optical Jumper P/N CWDM Options Mux, 1RU, SC/APC Conn. Demux, 1RU, SC/APC Conn. 4-ch. 6925WM-SDSP/4 6925WD-SDSP/4 1 Meter 8000-0241-03 6-ch. 6925WM-SDSP/6 6925WD-SDSP/6 3 Meters 8000-0241-04 8-ch. 6925WM-SDSP/8 6925WD-SDSP/8 Optical Jumper Options SM Optical Jumper, SC/APC Conn. *System performance specifications indicated for use with single-mode fiber. Contact Force for complete performance specifications. Rev. 2.4, 01/25/05 Force Optical Broadcast Systems 825 Park Street, Christiansburg, VA 24073 USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 csr-sales@forceinc.com • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.