2211

2211 FIXED DIP DELAY LINE TD/TR = 10 (SERIES 2211) FEATURES • • • • High bandwidth (TD/TR =10) Low profile Epoxy encapsulated Meets or exceeds MIL-D-23859C N/C IN N/C N/C N/C N/C N/C N/C N/C N/C N/C GND 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 N/C OUT N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C data 3 ® delay devices, inc. PACKAGES 2211-xxz (DIP) 2211-xxzC4 (Gull-Wing) xx = Delay (TD) z = Impedance Code PIN DESCRIPTIONS IN OUT GND Signal Input Signal Output Ground FUNCTIONAL DESCRIPTION The 2211-series device is a fixed, single-input, single-output, passive delay line. The signal input (IN) is reproduced at the output (OUT) with a delay (TD) given by the device dash number. The characteristic impedance of the line is given by the letter code that follows the dash number (See Table). The rise time (TR) of the line is 10% of TD, and the 3dB bandwidth is given by 3.5 / TD. SERIES SPECIFICATIONS • • • • • Dielectric breakdown: Distortion @ output: Operating temperature: Storage temperature: Temperature coefficient: 50 Vdc 10% max. -55°C to +125°C -55°C to +125°C 100 PPM/°C DASH NUMBER SPECIFICATIONS Part Number 2211-40C 2211-80C 2211-120C 2211-200C 2211-300C 2211-400C 2211-500C 2211-600C 2211-800C 2211-50D 2211-100D 2211-150D 2211-200D 2211-250D 2211-300D 2211-400D 2211-500D 2211-600D 2211-800D 2211-1000D 2211-200G 2211-300G 2211-400G 2211-500G 2211-600G 2211-800G 2211-1000G 2211-1200G 2211-1500G 2211-2000G TD (ns) 40.0 ± 2.0 80.0 ± 4.0 120 ± 6.0 200 ± 10.0 300 ± 15.0 400 ± 20.0 500 ± 25.0 600 ± 30.0 800 ± 40.0 50.0 ± 2.5 100 ± 5.0 150 ± 7.5 200 ± 10.0 250 ± 12.5 300 ± 15.0 400 ± 20.0 500 ± 25.0 600 ± 30.0 800 ± 40.0 1000 ± 50.0 200 ± 10.0 300 ± 15.0 400 ± 20.0 500 ± 25.0 600 ± 30.0 800 ± 40.0 1000 ± 50.0 1200 ± 60.0 1500 ± 75.0 2000 ± 100 TR (ns) 4.0 8.0 12.0 20.0 30.0 40.0 50.0 60.0 80.0 5.0 10.0 15.0 20.0 25.0 30.0 40.0 50.0 60.0 80.0 100 20.0 30.0 40.0 50.0 60.0 80.0 100 120 150 200 Imped . (Ω ) 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 500 500 500 500 500 500 500 500 500 500 RDC (Ω ) 7.0 8.0 10.0 13.0 12.0 15.0 17.0 23.0 38.0 7.0 10.0 12.0 22.0 21.0 23.0 26.0 30.0 37.0 41.0 47.0 20.0 37.0 40.0 45.0 52.0 80.0 100 110 130 156 DASH NUMBER SPECIFICATIONS Part Number 2211-50A 2211-60A 2211-80A 2211-100A 2211-150A 2211-200A 2211-50B 2211-60B 2211-80B 2211-100B 2211-150B 2211-200B 2211-300B 2211-400B TD (ns) 50.0 ± 2.5 60.0 ± 3.0 80.0 ± 4.0 100 ± 5.0 150 ± 7.5 200 ± 10.0 50.0 ± 2.5 60.0 ± 3.0 80.0 ± 4.0 100 ± 5.0 150 ± 7.5 200 ± 10.0 300 ± 15.0 400 ± 20.0 TR (ns) 5.0 6.0 8.0 10.0 15.0 20.0 5.0 6.0 8.0 10.0 15.0 20.0 30.0 40.0 Imped. (Ω ) 50 50 50 50 50 50 100 100 100 100 100 100 100 100 RDC (Ω ) 3.2 3.6 5.0 6.0 6.0 7.0 6.0 6.0 6.5 7.0 8.0 8.5 11.0 12.0 ©1997 Data Delay Devices Doc #97027 2/7/97 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 1 2211 FUNCTIONAL DIAGRAM IN GND OUT PACKAGE DIMENSIONS 24 23 22 21 20 19 18 17 16 15 14 13 .580 MAX. .010 ±.002 1 2 3 4 5 6 7 8 9 10 11 12 .600 ±.005 1.270±.010 Lead Material: Nickel-Iron alloy 42 TIN PLATE .280 MAX. .015 TYP. .018 TYP. .070 MAX. 1.100±.010 11 Equal spaces each .100±.010 Non-Accumulative DIP (2214-xxz) .020 TYP. .040 TYP. .010±.002 24 23 22 21 20 19 18 17 16 15 14 13 .710 .590 ±.005 MAX. .882 ±.005 .007 ±.005 1 2 3 4 5 6 7 8 9 10 11 12 .090 1.100 1.280±.020 .100 .280 MAX. .050 ±.010 Gull-Wing (2214-xxzC4) Doc #97027 2/7/97 DATA DELAY DEVICES, INC. Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com 2 2211 PASSIVE DELAY LINE TEST SPECIFICATIONS TEST CONDITIONS 25oC ± 3oC High = 3.0V typical Low = 0.0V typical Source Impedance: 50Ω Max. Rise/Fall Time: 3.0 ns Max. (measured at 10% and 90% levels) Pulse Width (TD 75ns): PERIN = 10 x TD INPUT: Ambient Temperature: Input Pulse: OUTPUT: Rload: Cload: Threshold: 10MΩ 10pf 50% (Rising & Falling) NOTE: The above conditions are for test only and do not in any way restrict the operation of the device. PERIN PWIN TRISE INPUT SIGNAL 90% 50% 10% TFALL VIH 90% 50% 10% VIL TFALL TRISE TRISE OUTPUT SIGNAL 90% 50% 10% TFALL VOH 90% 50% 10% VOL Timing Diagram For Testing OUT PULSE GENERATOR TRIG RIN IN DEVICE UNDER TEST (DUT) OUT IN TRIG OSCILLOSCOPE 50 Ω RIN = ROUT = ZLINE ROUT Test Setup Doc #97027 2/7/97 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 3