2211

2200 Series/Microminiature Reed Relays M ICROMINIATURE REED RELAYS Ideally suited to the needs of Automated Test Equipment and RF requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Coto’s Factory. 2200 SERIES FEATURES u u u u u u u u Very small (0.17 in2), high reliability reed relays. High Insulation Resistance - 1012 Ω available with some models. High speed switching compared to electromechanical relays. Hermetically sealed contacts for long life. Epoxy coated steel shell provides magnetic shielding. Optional Electrostatic Shield for reducing capacitive coupling. Optional Coaxial Shield for 50 Ω impedance and switching of fast rise time digital pulses offered on some models. Relay models 2200-2301, 2200-2302, are ATE industry standards. Specifically engineered for OEM designs and maintenance of existing production fixtures. Dimensions in Inches (Millimeters) Bottom View 2 Note: Model #’s 2200-2301 & 2200-2302 represent complete part numbers. COTO TECHNOLOGY RHOPOINT COMPONENTS LTD, Email: components@rhopoint.co.uk Website: www.rhopoint.co.uk 2200 Series/Microminiature Reed Relays Model Number s P ar ameter s 2204 Test Conditions Units 2 1 For m A 2211 1 For m C For Shield Option See 2911 5 230 3.8 0.4 12 1500 9.0 1.0 2200-2301 1 For m A Electr ostatic Shield 2200-2302 1 For m A Coaxial Shield COIL SPECS. Nom. Coil Voltage Coil Resistance Operate Voltage Release Voltage CONTACT RATINGS Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy-Typical Rated Loads Static Contact Resistance (max. init.) Dynamic Contact Resistance (max. init.) RELAY SPECIFICATIONS Insulation Resistance (minimum) Capacitance - Typical Across Open Contacts Dielectric Strength (minimum) Operate Time - including bounce Release Time - Typical Between all Isolated Pins .at 100V, 25°C, 40% RH Shield Floating Shield Guarding Between Contacts Contacts to Shield Contacts/Shield to Coil At Nominal Coil Voltage, 30 Hz Square Wave Zener-Diode Suppression Ω pF pF VDC/peak AC VDC/peak AC VDC/peak AC msec. msec. x 1012 0.9 0.2 250 250 1500 0.5 (typ.) 0.1 x 1011 0.9 N/A 200 N/A 1500 1.0 (typ.) 2.0 x 1011 0.9 0.2 250 250 1500 0.55 (max.) 0.1 x 1011 0.9 0.2 250 250 1500 0.55 (max.) 0.1 1 VDC +/- 10%, 25° C Must Operate by Must Release by Ω VDC - Max. VDC - Min. 5 370 3.8 0.4 12 1500 9.0 1.0 5 150 3.6 0.5 5 150 3.6 0.5 Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. Signal Level 1.0V,10mA Volts Amps Amps Watts x 10 Ops. x 10 Ops. 6 6 200 0.5 1.0 10 500 5 0.100 0.200 100 0.25 0.5 3 100 5 0.150 0.200 150 0.5 1.0 10 500 5 0.150 0.200 150 0.5 1.0 10 500 5 0.150 0.200 50mV, 10mA 0.5V, 50mA at 100 Hz, 1.5 msec Ω Ω Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1"x.1" (2.54mm x 2.54mm) Environmental Ratings Notes: 1 Consult factory for life expectancy at other switching loads. 2 Model 2204, pin #7 is tied to optional electrostatic shield, pins #6 & #7 are tied to optional coaxial shield. Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C Solder Temp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s COTO TECHNOLOGY RHOPOINT COMPONENTS LTD Holland Rd, Hurst Green, Oxted, Surrey, RH8 9AX,ENGLAND