SZM-01T-P0.7

Crimp ZL CONNECTOR • Retainer 5.0mm (.197") pitch Disconnectable Crimp style Wire-to-wire connectors Features –––––––––––––––––––––––– • Housing lances The lances on the resilient housing are not affected by external force. They allow the contact to be easily inserted and securely locked into the housing, and require only a light insertion force. The retainer ensures high reliability by preventing non-insertion or accidental release of the contact. Installed after the contacts are inserted, it locks and secures the contacts at the lance sections. • Box-shaped contacts Our box-shaped contacts serve as socket contacts in a wide variety of applications from low-voltage, low-current signal circuits to power supply circuits. • Mountable on a variety of panels Due to our unique panel installation locking mechanisms, the housing can be easily installed on panels of various thicknesses without using tools. ZL connectors are reliable, smoothly mating wire-to-wire connectors. Specifications ––––––––––––––––––– • Current rating: 10A AC, DC max. • Voltage rating: 300V AC, DC max. • Temperature range: -25˚C to +90˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/7m Ω max. After environmental testing/10m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 1,500V AC/minute • Applicable wire: AWG #26 to #16 0.13 to 1.25mm2 • Applicable panel thickness: 0.7 to 2.4mm(.028" to .094") * Contact JST for details. Note: The current rating varies depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and wire size. Current unit: A Circuits #16 2 4 6 10 9 8 6 6 5 Wire size (AWG) #18 6 5 4 4 4 3 #20 5 4 3 3 3 2 #22 4 3 3 3 3 2 #24 3 3 2 2 2 1 #26 2 2 2 2 2 1 Retainer 8 12 16 Housing lance Box-shaped contact Standards –––––––––––––––––––––– 0 1 Recognized E60389 Certified LR20812 666 ZL CONNECTOR Contact–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Pin contact 1.85 (.073) Socket contact 3.2 (.126) 14.3(.563) 22.5(.886) 4.0 2.5 (.157) (.098) 4.5 (.177) 2.5 4.0 (.098) (.157) Model No. Pin contact Socket contact mm2 Applicable wire AWG # Insulation O.D. mm(in.) 1.3 to 2.7 (.051 to .106) 3,000 Q´ty / reel SZM-01T-P0.7 SZF-01T-P0.7 0.13 to 0.5 26 to 20 0.75 to 1.25 18 to 16 22+22 to 20+20 1.9 to 3.1 (.075 to .122) 1.7+1.7 to 2.0+2.0 (.067+.067 to .079+.079) SZM-41T-P0.7 SZF-41T-P0.7 0.3+0.3 to 0.5+0.5 Material and Finish Phoshor bronze , tin-plated Note: Contact JST for special products. Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Material: Housing...Nylon 6, UL94V-0, white Retainer...Glass-filled nylon 66, UL94V-0, ivory Circuits Voltage Current rating rating Receptacle housing(for pin contact) ZLR-02V Q’ty / bag 16.2(.638) Plug housing(for socket contact) ZLP-02V 9.4 (.370) Retainer Q’ty / bag ZLS-02V (Used with both housings with 2 and 4 circuits) Q’ty / bag 2 300V 10.0A 6.2(.244) 500 12.4 (.488) 17.5(.689) 8.2 (.323) 21.0(.827) 500 29.7(1.169) 12.9 (.508) 10.45 (.411) 1,000 ZLR-04V Q’ty / bag 21.2(.835) ZLP-04V Q’ty / bag 11.7 (.461) 6.4 (.250) 8.8 (.346) 11.2(.441) 4 300V 9.0A 500 12.4 (.488) 17.5(.689) 8.2 (.323) 21.0(.827) 500 29.7(1.169) 12.9 (.508) 667 ZL CONNECTOR Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Material: Housing...Nylon 6, UL94V-0, white Retainer...Glass-filled nylon 66, UL94V-0, ivory Retainer Q’ty / bag ZLS-03V Q’ty / bag Circuits Voltage Current rating rating Receptacle housing(for pin contact) ZLR-06V Q’ty / bag Plug housing(for socket contact) ZLP-06V 26.2(.1.031) 16.2(.638) 16.2(.638) 16.2(.638) 3.3 (.130) 8.8 (.346) 6 300V 8.0A 500 500 1,000 29.7(1.169) 12.9(.508) 12.4(.488) 17.5(.689) 8.2 (.323) 21.0(.827) ZLR-08V Q’ty / bag ZLP-08V Q’ty / bag ZLS-08V Q’ty / bag 31.2(1.228) 21.2(.835) 21.2(.835) 8 300V 6.0A 21.2(.835) 500 500 1,000 29.7(1.169) 12.9 (.508) 12.4 (.488) 17.5(.689) 8.2 (.323) 21.0(.827) 3.3 (.130) 8.8 (.346) ZLR-12V Q’ty / bag ZLP-12V Q’ty / bag ZLS-12V Q’ty / bag 31.2(1.228) 41.2(1.622) 31.2(1.228) 12 300V 6.0A 200 200 31.2(1.228) 3.3 (.130) 8.8 (.346) 1,000 29.7(1.169) 12.9 (.508) 12.4 (.488) 17.5(.689) 8.2 (.323) 21.0(.827) ZLR-16V Q’ty / bag ZLP-16V Q’ty / bag ZLS-16V Q’ty / bag 41.2(1.622) 51.2(2.016) 41.2(1.622) 16 300V 5.0A 200 200 41.2(1.622) 1,000 29.7(1.169) 12.9 (.508) 12.4 (.488) 17.5(.689) 8.2 (.323) 21.0(.827) 3.3 (.130) 8.8 (.346) Note: 1. ZL connectors with any number of circuits can be used either panel mounted or free hanging. The panel hole dimensions are given on the next page. 2. Contact JST for special products. 668 ZL CONNECTOR Contact position location numbers––––––––––––––––––––––––––––––––––––––––––– Contact position numbers are stamped Retainer Retainer Receptacle housing Plug housing Receptacle housing Plug housing 21 3 1 2 1 1 2 3 8 1 4 42 31 63 52 41 3 6 JST 12 24 13 36 25 14 JST 2 4 3 5 6 4 2 8 7 6 5 4 3 2 1 1 12 11 10 9 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 6 4 4 3 2 1 8 7 6 5 7 5 6 7 3 10 6 4 5 2 1 3 2 1 2 3 4 12 9 13 JST 1 2 5 2 8 7 6 5 JST JST JST 1 4 16 6 5 4 3 2 1 12 11 10 9 8 7 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 12 15 6 7 11 14 5 6 4 3 2 JST JST JST 10 9 13 4 3 5 12 4 JST JST 1 JST 11 8 7 2 1 3 10 9 2 1 669 ZL CONNECTOR Panel layout–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Shape l 6.5 (.256) B Shape ll B 2.7 7.8 (.106) (.307) DC DC A A Circuits 2 4 6 8 12 16 Receptacle housing ZLR-02V ZLR-04V ZLR-06V ZLR-08V ZLR-12V ZLR-16V Panel hole shape Panel dimensions mm(in.) A 11.5( .453) 16.5( .650) 21.5( .846) 26.5(1.043) 36.5(1.437) 46.5(1.831) General tolerance C 13.95(.549) 13.95(.549) 13.95(.549) 13.95(.549) 13.95(.549) 13.95(.549) ± 0.13 (± .005) D 13.2(.520) 13.2(.520) 13.2(.520) 13.2(.520) 13.2(.520) 13.2(.520) B 4.4(.173) 5.2(.205) 5.2(.205) 5.2(.205) 5.2(.205) 5.2(.205) Applicable panel thickness mm(in.) 0.7 to 2.4 (0.28 to .094) Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. Assembly layout –––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2, 4 41.5(1.634) When retainers are mounted Dimensions mm(in.) 18.1(.713) 17.5(.689) 6, 8, 12, 16 37.9(1.492) Applicator for the semi-automatic press AP-K2N ––––––––––––––––––––––––––––––– Contact SZF-01T-P0.7 SZM-01T-P0.7 SZF-41T-P0.7 SZM-41T-P0.7 Crimp applicator MKS-L with safety cover without safety cover APLMK SZF/M01-07 APLMK SZF/M01-07 APLMK SZF/M41-07 APLMK SZF/M41-07 APLNC SZF/M01-07 APLNC SZF/M01-07 APLNC SZF/M41-07 APLNC SZF/M41-07 Compact crimp applicator MKS-LS with safety cover without safety cover – – – – – – – – Strip-crimp applicator MKS-SC with safety cover – – – – 670