2EDF7175FXUMA2

Product brief Dual-channel isolated EiceDRIVER™ family Fast, robust, dual-channel, functional and reinforced isolated Si and SiC MOSFET gate driver ICs with accurate and stable timing Device overview VDDI SLDON SLDOP UVLO SLDO UVLO TX INA INB Control logic DISABLE ENABLE NC DTC Dead time control TX RX Input- to-output isolation Overview The dual-channel isolated EiceDRIVER™ product family is designed for the use in high-performance power conversion applications. Very strong 4 A/8 A source/sink dualchannel gate drivers increase efficiency in CoolMOS™, CoolSiC™ and OptiMOS™ MOSFET half-bridges. The low propagation delay of 37 ns, combined with highly accurate and stable timing overtemperature and production, enables further efficiency gains within and across galvanically isolated power stages or in multi-phase/multi-level topologies. The availability of functional and reinforced isolated drivers in different packages makes these a perfect fit for both primary side and (safe) secondary side control. Gate driver outputs come with a high 5 A reverse current capability and 150 V/ns CMTI robustness for high dv/dt power loops. For slower switching or driving smaller MOSFETs, 1 A/2 A peak current product variants are available as well. Logic OUTA Channel-to-channel isolation UVLO RX Logic GNDI Product benefits System benefits Fast power switching with accurate timing Efficiency gain and lower losses ›› Lower switching losses in half-bridges due to fast and accurate turn on/off ›› Perfect for new digital, fast high resolution PWM control including light load optimization Enabling higher system efficiency and higher power density designs Improved thermal behavior at smaller form factor ›› LGA with 1 mm, DSO with 2.3 mm package height versus volume > 1 cm for pulse transformers ›› Eliminates two costly protection diodes on the gate driver outputs Improving long term competitive cost position, integration and mass manufacturability ›› Propagation delay typ. 37 ns with 3 ns channel-to-channel precision ›› Max. propagation delay variation ~14 ns Optimized for area and system BOM ›› Isolation and driver in one package ›› Low power dissipation due to low on-resistance ›› Output stages with 5 A reverse current capability GNDA VDDB OUTB GNDB Product family overview Product key features ›› Available with 4 A/8 A and 1 A/2 A source/sink currents VDDA Robustness against switching noise ›› Floating drivers are able to handle large inductive voltage over- and undershoots ›› Very good common mode transient immunity CMTI >150 V/ns ›› Undervoltage lockout function for switch protection Protection and safe operation ›› Ideal for use in high power designs with fast switching transients ›› Reliable CT coreless transformer PWM signal chain to turn on high side MOSFETs Output- to -output channel isolation ›› Functional level galvanic isolation Flexible configurations ›› HS+LS, HS+HS, LS+LS or 2x Imax on 1xHS Lower EMI by ground isolation, driver proximity to MOSFETs or the use of 4-pin Kelvin source MOSFETs Input- to output channel isolation ›› Functional and reinforced galvanic isolation Regulatory safety ›› Functional for primary-side control ›› Reinforced for secondary-side control Simplified safety approval through component (UL1577) and system (IEC60950, IEC62368) certificates www.infineon.com/2EDi Extending end-product lifetime by improving safe operation of power switches in normal and abnormal field (grid) conditions Product brief Dual-channel isolated EiceDRIVER™ family Fast, robust, dual-channel, functional and reinforced isolated Si and SiC MOSFET gate driver ICs with accurate and stable timing System application diagram EMI Filter Sync Rec Primary stage PFC 2EDS8165H 1 A/2 A 2EDS8265H 4 A/8 A 2EDS9265H 4 A /8 A 2EDF7235K 4 A/8 A w. DTC 2EDF7275K 4 A/8 A Functional isolation Reinforced isolation Functional isolation 4 mm TCOM PDU Non-isolated DC-DC Brick 2EDF7175F 1 A/2 A 2EDF7275F 4 A/8 A 2EDF9275F 4 A/8 A DSO16 pin Narrow body 1.27 mm lead pitch TCOM supplies Isolated DC-DC CPU (VRM) POL power 8 mm DSO16 pin Wide body 1.27 mm lead pitch LGA 13 5x5 mm 0.65 mm lead pitch Product portfolio Part number Orderable part number (OPN) 2EDF7175F 2EDF7175FXUMA1 2EDF7275F 2EDF7275FXUMA1 2EDF9275F 2EDF9275FXUMA1 2EDS8165H 2EDS8165HXUMA1 2EDS8265H 2EDS8265HXUMA1 2EDS9265H 2EDS9265HXUMA1 2EDF7235K 2EDF7235KXUMA1 2EDF7275K 2EDF7275KXUMA1 Package Input type Driver source/ sink current 1 A/2 A NB-DSO16 10 x 6 mm WB-DSO16 10.3 x 10.3 mm 4 A/8 A Dual-mode (IN_A, IN_B) 1 A/2 A 4 A/8 A LGA13 5.0 x 5.0 mm Gate driver UVLO 4V Input to output isolation Isolation class Rating Surge testing Safety certification Functional VIO = 1.5 kVDC n.a. n.a. VIOSM = 10 kVpeak (IEC60065) UL1577 IEC60950 IEC62368 CQC n.a. n.a. 13 V 8V no VIOTM = 8 kVpeak Reinforced VISO = 5.7 kVrms (UL1577) Functional VIO = 1.5 kVDC 13 V 4V Deadtime control yes no www.infineon.com/2EDi Published by Infineon Technologies Austria AG 9500 Villach, Austria © 2020 Infineon Technologies AG. All Rights Reserved. Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Order Number: B152-I1066-V1-7600-EU-EC-P Date: 09 / 2020 Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any life-­ endangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.