IAUA250N04S6N008AUMA1

IAUA250N04S6N008 Automotive MOSFET OptiMOS™ 6 Power-Transistor PG-HSOF-5-1 Features • OptiMOS™ power MOSFET for automotive applications • N-channel – Enhancement mode – Normal Level • Extended qualification beyond AEC-Q101 • Enhanced electrical testing • Robust design • MSL3 up to 260°C peak reflow • 175°C operating temperature • Green product (RoHS compliant) • 100% Avalanche tested Potential applications General automotive applications. Product validation Qualified for automotive applications. Product validation according to AEC-Q101. Product Summary VDS 40 V RDS(on),max 0.8 mΩ ID (chip limited) 340 A Type Package Marking IAUA250N04S6N008 PG-HSOF-5-1 6N04R8 Data Sheet Please read the Important Notice and Warnings at the end of this document www.infineon.com/mosfets Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Table of Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1. . . . . . . Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. . . . . . Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. . . . . . Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. . . . . . . Electrical characteristics diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6. . . . . . Package outline & footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 ........ Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ........ Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ........ 2 Data Sheet 2 Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Maximum ratings at Tj=25 °C, unless otherwise specified Parameter Continuous drain current Symbol ID Conditions Value V GS = 10 V, Chip limitation1,2) 340 V GS = 10 V, DC current3) 250 T a = 85 °C, V GS = 10 V, Unit A 51 R thJA on 2s2p2,4) Pulsed drain current2) I D,pulse T C = 25 °C, t p= 100 µs 1100 Avalanche energy, single pulse2) E AS I D = 47 A, R G,min = 25 Ω 480 mJ Avalanche current, single pulse I AS R G,min = 25 Ω 95 A Gate source voltage V GS – ±20 V Power dissipation P tot T C = 25 °C 172 W Operating and storage temperature T j, T stg – -55 ... +175 °C 3 Data Sheet 3 Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Thermal characteristics2) Parameter Thermal resistance, junction - case Thermal resistance, junction - ambient4) Symbol Values Conditions Unit min. typ. max. R thJC – – – 0.87 R thJA – – 23 – K/W Electrical characteristics at Tj=25 °C, unless otherwise specified Parameter Symbol Values Conditions Unit min. typ. max. Static characteristics Drain-source breakdown voltage V (BR)DSS V GS = 0 V, I D = 1 mA 40 – – Gate threshold voltage V GS(th) V DS = V GS, I D = 90 µA 2.2 2.6 3.0 Zero gate voltage drain current I DSS V DS = 40 V, V GS = 0 V, T j = 25 °C – – 1 – – 27 V DS = 40 V, V GS = 0 V, T j = 125 °C2) V µA Gate-source leakage current I GSS V GS = 20 V, V DS = 0 V – – 100 nA Drain-source on-state resistance RDS(on) V GS = 7 V, I D = 100 A – 0.74 0.96 mΩ V GS = 10 V, I D = 100 A – 0.60 0.80 – – 0.9 – Gate resistance2) Data Sheet RG 4 4 Ω Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Parameter Symbol Values Conditions Unit min. typ. max. – 5452 7088 – 1642 2135 Dynamic characteristics2) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss – 80 105 Turn-on delay time t d(on) – 11 – Rise time tr – 14 – Turn-off delay time t d(off) – 22 – Fall time tf – 15 – Gate to source charge Q gs – 23 30 Gate to drain charge Q gd – 16 25 Gate charge total Qg – 81 109 Gate plateau voltage V plateau – 4.3 – V A V GS = 0 V, V DS = 25 V, f = 1 MHz V DD = 32 V, V GS = 10 V, I D = 250 A, R G = 3.5 Ω pF ns Gate Charge Characteristics2) V DD = 32 V, I D = 250 A, V GS = 0 to 10 V nC Reverse Diode Diode continous forward current2) IS T C = 25 °C – – 250 Diode pulse current2) I S,pulse T C = 25 °C, t p = 100 µs – – 1100 Diode forward voltage V SD V GS = 0 V, I F = 125 A, T j = 25 °C – 0.8 1.1 V Reverse recovery time2) t rr – 55 – ns Reverse recovery charge2) Q rr – 62 – nC V R = 20 V, I F = 50 A, di F/dt = 100 A/µs 1) Current is limited by the overall system design and the customer-specific PCB. 2) The parameter is not subject to production testing – specified by design. 3) Current is limited by the package. 4) Device on 2s2p FR4 PCB defined in accordance with JEDEC standards (JESD51-5, -7). PCB is vertical in still air. Data Sheet 5 5 Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Electrical characteristics diagrams 2 Drain current P tot = f(T C); V GS ≥ 10 V I D = f(T C); V GS ≥ 10 V 300 300 250 250 200 200 ID [A] Ptot [W] 1 Power dissipation 150 150 100 100 50 50 0 0 0 50 100 150 200 0 50 100 TC [°C] 200 TC [°C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0; parameter: tp Z thJC = f(t p); parameter: D=tp/T 10000 101 1 µs 1000 100 10 µs 0.5 ZthJC [K/W] 100 µs ID [A] 150 100 150 µs 10-1 0.1 0.05 0.01 10 10-2 single pulse 1 10-3 0.1 1 10 100 10-6 VDS [V] Data Sheet 10-5 10-4 10-3 10-2 10-1 tp [s] 6 6 Rev. 1.0 2022-01-24 100 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C; parameter: VGS R DS(on) = f(I D); T j = 25 °C; parameter: VGS 1500 1.8 10 V 1.6 4.5 V 1250 5.5 V 7V 1.4 5V 1000 RDS(on) [mW] ID [A] 1.2 750 5V 5.5 V 1 0.8 7V 500 10 V 0.6 4.5 V 250 0.4 0 0 1 2 0.2 3 0 250 500 VDS [V] 750 1000 ID [A] 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6V: parameter: Tj R DS(on) = f(T j); I D = 100 A, V GS = 10 V 1500 1.6 1.4 1250 1.2 RDS(on) [mW] ID [A] 1000 750 1 max. 0.8 0.6 500 typ. 175 °C 0.4 -55 °C 250 0.2 25 °C 0 3 4 5 0 6 -60 VGS [V] Data Sheet -20 20 60 100 140 Tj [°C] 7 Rev. 1.0 2022-01-24 180 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS; parameter: I D C = f(V DS); V GS = 0 V; f = 1 MHz 104 4 Ciss 3.5 Coss 900 µA 2.5 VGS(th) [V] C [pF] 3 103 Crss 90 µA 2 1.5 102 1 0.5 101 0 -60 -20 20 60 100 140 0 180 10 20 30 VDS [V] Tj [°C] 11 Typical forward diode characteristics 12 Typ. avalanche characteristics I F = f(V SD ); parameter: T j I AS = f(t AV); parameter: T j(start) 100 25 °C 100 °C 150 °C IAV [A] IF [A] 103 102 175 °C 10 25 °C 101 100 0 0.2 0.4 0.6 0.8 1 1 1.2 1 VSD [V] Data Sheet 10 100 tAV [µs] 8 Rev. 1.0 2022-01-24 1000 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 13 Typical avalanche energy 14 Drain-source breakdown voltage E AS = f(T j); parameter: ID V BR(DSS) = f(T j); I D_typ = 1 mA 44 1000 23 A VBR(DSS) [V] EAS [mJ] 42 500 47 A 40 95 A 38 0 25 75 125 -60 175 -20 20 60 Tj [°C] 100 140 180 Tj [°C] 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 250 A pulsed; parameter: V DD 10 V GS 9 8V 8 Qg 32 V 7 VGS [V] 6 5 V g s(th) 4 3 2 Q g (th) Q sw Q g ate 1 Q gs 0 0 60 Q gd 120 Qgate [nC] Data Sheet 9 Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Package Outline Footprint Packaging Insert image Data Sheet 10 Rev. 1.0 2022-01-24 OptiMOS™ 6 Automotive Power MOSFET, 40 V IAUA250N04S6N008 Revision History Revision Date Changes Revision 1.0 24.01.2022 Final Data Sheet Data Sheet 11 Rev. 1.0 2022-01-24 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2022-01-24 IMPORTANT NOTICE Published by The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). Infineon Technologies AG 81726 Munich, Germany © 2022 Infineon Technologies AG All Rights Reserved. Do you have any questions about any aspect of this document? Email: erratum@infineon.com With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact the nearest Infineon Technologies Office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.