1V5KE15CA

1V5KE6V8(C)A - 1V5KE440(C)A Transient Voltage Suppressors 1V5KE6V8(C)A - 1V5KE440(C)A Features • • • • • Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 µA above 10V. UL certified, UL #E210467. DO-201AE COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. • • DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 1500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol PPPM IPPM PD IFSM Tstg TJ Peak Pulse Current Power Dissipation .375 " lead length @ TA = 75°C Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range Operating Junction Temperature TA = 25°C unless otherwise noted Parameter Peak Pulse Power Dissipation at TP=1ms Value 1500 see table 5.0 (Note 1) Units W A W A °C °C 200 -65 to +175 + 175 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum. 200 2 F airchild Semiconductor Corporation 1V5KE6V8(C)A - V5KE440(C)A, Rev. D 1V5KE6V8(C)A - 1V5KE440(C)A Transient Voltage Suppressors (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device 1V5KE6V8(C)A 1V5KE7V5(C)A 1V5KE8V2(C)A 1V5KE9V1(C)A 1V5KE10(C)A 1V5KE11(C)A 1V5KE12(C)A 1V5KE13(C)A 1V5KE15(C)A 1V5KE16(C)A 1V5KE18(C)A 1V5KE20(C)A 1V5KE22(C)A 1V5KE24(C)A 1V5KE27(C)A 1V5KE30(C)A 1V5KE33(C)A 1V5KE36(C)A 1V5KE39(C)A 1V5KE43(C)A 1V5KE47(C)A 1V5KE51(C)A 1V5KE56(C)A 1VKE62(C)A 1V5KE68(C)A 1V5KE75(C)A 1V5KE82(C)A 1V5KE91(C)A 1V5KE100(C)A 1V5KE110(C)A 1V5KE120(C)A 1V5KE130(C)A 1V5KE150(C)A 1V5KE160(C)A 1V5KE170(C)A 1V5KE180(C)A 1V5KE200(C)A 1V5KE220(C)A 1V5KE250(C)A 1V5KE300(C)A 1V5KE350(C)A 1V5KE400(C)A 1V5KE440(C)A Reverse Stand-off Voltage VRWM (V) 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102.0 111.0 128.0 136.0 145.0 154.0 171.0 185.0 214.0 256.0 300.0 342.0 376.0 TA = 25°C unless otherwise noted Test Breakdown Voltage Current VBR (V) IT(mA) Min Max 6.45 7.14 10 7.13 7.88 10 7.79 8.61 10 8.65 9.55 1 9.50 10.5 1 10.5 11.6 1 11.4 12.6 1 12.4 13.7 1 14.3 15.8 1 15.2 16.8 1 17.1 18.9 1 19.0 21.0 1 20.9 23.1 1 22.8 25.2 1 25.7 28.4 1 28.5 31.5 1 31.4 34.7 1 34.2 37.8 1 37.1 41.0 1 40.9 45.2 1 44.7 49.4 1 48.5 53.6 1 53.2 58.8 1 58.9 65.1 1 64.6 71.4 1 71.3 78.8 1 77.9 86.1 1 86.5 95.5 1 95.0 105.0 1 106.0 116.0 1 114.0 126.0 1 124.0 137.0 1 143.0 158.0 1 152.0 168.0 1 162.0 179.0 1 171.0 189.0 1 190.0 210.0 1 209.0 231.0 1 237.0 263.0 1 285.0 315.0 1 333.0 368.0 1 380.0 420.0 1 418.0 462.0 1 Clamping Voltage @IPPM VC(V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 26.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 104.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 Peak Pulse Current IPPM (A) Reverse Leakage VRWM IR (uA)* 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 143 133 124 112 103 96.2 90.0 82.0 71.0 67.0 59.5 54.2 49.0 45.2 40.0 36.2 33.0 30.1 28.0 25.3 23.2 21.4 19.5 17.7 16.3 14.6 13.3 12.0 11.0 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 4.6 4.5 3.8 3.2 2.8 2.6 * For bidirectional parts with VRWM