FSEZ1216B — Primary-Side-Regulation PWM Integrated Power MOSFET
January 2009
FSEZ1216B
Primary-Side-Regulation PWM Integrated Power MOSFET
Features
Constant-Voltage (CV) and Constant-Current (CC) Control without Secondary-Feedback Circuitry Green-Mode Function: PWM Frequency Linearly Decreasing Fixed PWM Frequency at 50kHz with Frequency Hopping to Solve EMI Problems Cable Compensation in CV mode Low Startup Current: 10μA Low Operating Current: 3.5mA Peak-Current-Mode Control in CV Mode Cycle-by-Cycle Current Limiting VDD Over-Voltage Protection (OVP) with Auto-Restart VDD Under-Voltage Lockout (UVLO) Fixed Over-Temperature Protection (OTP) with Latch DIP-8 Package Available
Description
This highly integrated PWM controller provides several features to enhance the performance of low-power flyback converters. The proprietary topology enables most simplified circuit design especially for battery charger applications. A low-cost, smaller, and lighter charger results when compared to a conventional design or a linear transformer. The startup current is only 10μA, which allows large startup resistance for further power saving. To minimize the standby-power consumption, the proprietary green-mode function provides off-time modulation to linearly decrease PWM frequency under light-load conditions. This green-mode function assists the power supply in meeting power conservation requirements. By using FSEZ1216B, a charger can be implemented with few external components and minimized cost. A typical output CV/CC characteristic envelope is shown in Figure 1. FSEZ1216B series controllers are available in an 8-pin DIP package.
Applications
Battery Chargers for Cellular Phones, Cordless Phones, PDA, Digital Cameras, Power Tools Best Choice to Replace Linear Transformer and RCC SMPS
Figure 1.
Typical Output V-I Characteristic
Ordering Information
Part Number
FSEZ1216BNY
Operating Temperature Range
-40°C to +105°C
Eco Status
Green
Package
8-Lead, Dual Inline Package (DIP-8)
Packing Method
Tube
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2008 Fairchild Semiconductor Corporation FSEZ1216B Rev. 1.0.0
www.fairchildsemi.com
FSEZ1216B — Primary-Side-Regulation PWM Integrated Power MOSFET
Application Diagram
Figure 2.
Typical Application
Internal Block Diagram
Brownout Protection
Vsah Vsah IPK
Figure 3.
© 2008 Fairchild Semiconductor Corporation FSEZ1216B Rev. 1.0.0
Functional Block Diagram
www.fairchildsemi.com 2
FSEZ1216B — Primary-Side-Regulation PWM Integrated Power MOSFET
Marking Information DXYTT Z XYTT EZ1216B TPM
F- Fairchild Logo Z- Plant Code X- 1 Digit Year Code Y- 1 Digit Week Code TT: 2 Digits Die Run Code T: Package Type (N=DIP) P: Y: Green Package M: Manufacture Flow Code
Figure 4.
Top Mark
Pin Configuration
CS COMR COMI COMV
Figure 5.
DRAIN GND VDD VS
Pin Configuration
Pin Definitions
Pin #
1 2 3 4 5 6 7 8
Name
CS COMR COMI COMV VS VDD GND DRAIN
Description
Analog Input, Current Sense. Connected to a current-sense resistor for peak-current-mode control in CV mode. The current-sense signal is also provided for output-current regulation in CC mode. Analog Output, Cable Compensation. Connect a resistor between COMR and GND for cable loss compensation in CV mode. Analog Output, Current Compensation. Output of the current error amplifier. Connect a capacitor between COMI pin and GND for frequency compensation. Analog Output, Voltage Compensation. Output of the voltage error amplifier. Connect a capacitor between COMV pin and GND for frequency compensation. Analog Input, Voltage Sense. Output-voltage-sense input for output-voltage regulation. Supply, Power Supply. Voltage Reference, Ground. Driver Output, Power MOSFET Drain. This pin is the high-voltage power MOSFET drain
© 2008 Fairchild Semiconductor Corporation FSEZ1216B Rev. 1.0.0
www.fairchildsemi.com 3
FSEZ1216B — Primary-Side-Regulation PWM Integrated Power MOSFET
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol
VVDD VVS VCS VCOMV VCOMI VDS ID IDM EAS IAR PD RθJA RθJC TJ TSTG TL ESD DC Supply Voltage VS Pin Input Voltage CS Pin Input Voltage
Parameter
(1,2)
Min.
-0.3 -0.3 -0.3 -0.3 TC=25°C TC=100°C
Max.
30 7.0 7.0 7.0 7.0 600 1 0.6 4 33 1 800 113 67 +150
Unit
V V V V V V A A A mJ A mW °C/W °C/W °C °C °C KV V
Voltage-Error Amplifier Output Voltage Voltage-Error Amplifier Output Voltage Drain-Source Voltage Continuous Drain Current Pulsed Drain Current Single-Pulse Avalanche Energy Avalanche Current Power Dissipation (TA<50°C) Thermal Resistance (Junction-to-Air) Thermal Resistance (Junction-to-Case) Operating Junction Temperature Storage Temperature Range Lead Temperature (Wave Soldering or IR, 10 Seconds) Electrostatic Discharge Capability, Human Body Model, JEDEC: JESD22-A114 Electrostatic Discharge Capability, Charged Device Model, JEDEC: JESD22-C101
-55
+150 +260 3.0 1000
Notes: 1. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. 2. All voltage values, except differential voltages, are given with respect to GND pin.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
TA
Parameter
Operating Ambient Temperature
Min.
-40
Typ.
Max.
+105
Unit
°C
© 2008 Fairchild Semiconductor Corporation FSEZ1216B Rev. 1.0.0
www.fairchildsemi.com 4
FSEZ1216B — Primary-Side-Regulation PWM Integrated Power MOSFET
Electrical Characteristics
VDD=15V, TA=25°C, unless otherwise specified.
Symbol VDD SECTION
VOP VDD-ON VDD-OFF IDD-ST IDD-OP
Parameter
Continuously Operating Voltage Turn-On Threshold Voltage Turn-Off Threshold Voltage Startup Current Operating Current Green-Mode Operating Supply Current VDD Over-Voltage-Protection Level VDD Over-Voltage-Protection Debounce Time Center Frequency FrequencyHopping Range
Conditions
Min.
Typ.
Max.
25
Units
V V V μA mA
15 4.5 0
很抱歉,暂时无法提供与“FSEZ1216BNY”相匹配的价格&库存,您可以联系我们找货
免费人工找货