QVE00033_05

QVE00033 Phototransistor Optical Surface Mount Interrupter Switch November 2005 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Features ■ No contact switching ■ Transistor Output ■ Compact surface mount package ■ Opaque black plastic housing ■ 2mm wide slot ■ 0.4 mm aperture width ■ Tape and reel ■ Reflow conditions: Description The QVE00033 is a miniature slotted optical switch designed for surface mount applications. It consists of a GaAs LED and a silicon phototransistor facing each other across a 2mm gap, and packaged in a temperature resistant black plastic housing. Preheat = 160°C for 120 seconds Reflow = 200°C for 60 seconds (peak = 240°C) HL-94V-0 housing ■ Package Dimension 0.016 (0.40) 0.049 (1.25) 0.159 (4.05) 0.165 (4.20) 0.079 (2.00) SECTION "A-A" 0.276±0.01 (7.00±0.25) 0.240 (6.10) "A" 0.146 (3.70) 0.213 (5.40) DIMPLE RIGHT VIEW 0.010±0.002 (4X) (0.25±0.05) "A" 0.295 (7.50) 0.059±0.008 (1.50±0.20) 0.020±0.002 (4X) (0.50±0.05) ANODE 0.020±0.002 (0.50±0.05) (4X) 0.039±0.002 (1.00±0.05) (4X) CATHODE 0.039±0.002 (4X) (1.00±0.05) COLLECTOR 0.099 (2.50) EMITTER 1 4 BOTTOM VIEW 2 3 Note: 1. Dimensions for all drawings are in inches (millimeters). Tolerance ±0.005" (0.127mm) unless othewise specified. ©2005 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com QVE00033 Rev. 1.0.0 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Soldering Temperature (Flow)(2,3) Total Power Dissipation Emitter Continuous Forward Current Reverse Voltage Power Dissipation(1) IF VR PD VCEO VECO IC PD 50 6 75 mA V mW Symbol TOPR TSTG TSOL-I TSOL-F PTOT Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 100 Units °C °C °C °C mW Sensor Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Power Dissipation(1) 30 4.5 20 75 V V mA mW Electrical/Optical Characteristics (TA = 25°C unless otherwise specified) Parameter Emitter Forward Voltage Reverse Current Peak Emission Wavelength Sensor Dark Current Coupled Collector Current Collector Emitter Rise Time Fall Time IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 40 µA VCC = 5 V, RL = 1000 Ω IC = 100 µA IC(ON) VCE (SAT) tr tf 100 — — — — — 7 7 600 0.4 150 150 µA V µs µs VCE = 20 V, IF = 0 mA ICEO — — 100 nA IF = 20 mA VR = 4 V IF = 20 mA VF IR lPE — — — 1.2 — 940 1.4 10 — V µA nm Test Conditions Symbol Min. Typ. Max. Units Notes: 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16" (1.6mm) from housing. 2 www.fairchildsemi.com QVE00033 Rev. 1.0.0 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Typical Performance Characteristics Ic(on)-Normalized Collector Current Ic(on)-Normalized Collector Current 1.0 .8 .6 Black Shield TA =25°C IF=5mA VCE=5V 1.0 .8 .6 .4 .2 0.0 Normalized to value with shield removed TA =25°C IF=5mA VCE=5V Normalized to value with shield removed .4 + E D + Black Shield d1 0 .2 0.0 d2 0 0 1 2 3 4 0 1 d2-Shield Distance (mm) 2 3 d1-Shield Distance (mm) 4 Figure 1. Normalized Collector Current Vs. Shield Distance Figure 2. Normalized Collector Current Vs. Shield Distance 1.4 18 ICE-Normalized Collector Current T =25°C A 1.2 1.0 IF=20mA 16 14 12 10 8 6 4 2 0 0 10 20 30 40 50 TA=25°C VCE=5V Normalized to IF=5mA ICE (mA) .8 .6 .4 IF=5mA IF=10mA .2 IF=1mA 0.0 0 2 4 6 VCE (V) 8 10 12 IF-Forward Current (mA) Figure 3. Collector Current Vs. Collector-Emitter Voltage Figure 4. Normalized Collector Current Vs. Forward Current 8 1.0 TA=25°C PW=300µs PRR=100µs VCC=5V Normalized to RL=1k T(off) Normalized T(off) TA=25°C PW=300µs PRR=100µs VCC=5V Normalized to RL=1k T(on) Normalized 6 T(on) .8 4 .6 2 .4 0 0 2 4 6 8 10 .2 0 2 4 6 8 10 RL (kΩ) Figure 5. Rise Time vs. Load Resistance RL (kΩ) Figure 6. Fall Time vs. Load Resistance 3 www.fairchildsemi.com QVE00033 Rev. 1.0.0 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Recommended Printed Circuit Board Pattern (For Reference Only) Mounting Center 0.62 1.11 0.85 2.50 1.92 1.85 4 www.fairchildsemi.com QVE00033 Rev. 1.0.0 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch Tape and Reel Dimensions R0.24 [R6.0] 0.24 [6.00] R6.5 [R165.0] R6.3 [R160.0] R0.31 [R8.0] B 0.65 [16.5] 3.94 [100.0] Ø3.54 [Ø90.0] R1.97 [R50.0] R5.16 [R131.0] R2.17 [R55.0] 0.83 [21.10] 0.09 [2.3] R0.27±0.047 [R6.75±1.20] 0.43 [10.75] VIEW B 0.059 [1.50] 0.30 [7.60] 0 [0] min 0.157 [4.00] Ø0.059 MIN A 0.069 [1.75] 0.256 [6.50] Max 0.232 [5.90] 0.014 [0.35] 0.295 [7.50] 0.476 [12.10] Max 0.630 [16.00] 0.005 [0.127] max 0.378 [9.60] Max COVER TAPE EMBOSSMENT 0.213 [5.40] USER DIRECTION 0.185 [4.70] 0.079 [2.00] 0.472 [12.00] DIMPLE ANODE (PIN1) FACING SPROCKET HOLE Quantitiy of units per reel is 800. VIEW A SCALE: 2:1 UNIT IN CAVITY QVE00033 ASSEMBLY 5 www.fairchildsemi.com QVE00033 Rev. 1.0.0 QVE00033 Phototransistor Optical Surface Mount Interrupter Switch TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ DISCLAIMER ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I17 6 www.fairchildsemi.com QVE00033 Rev. 1.0.0