TN5320A

TN5320A — PNP High Voltage Amplifier September 2007 TN5320A PNP High Voltage Amplifier • This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1.5 A. • Sourced from Process 34. 1 TO-226 1. Collector 2. Base 3. Emitter Absolute Maximum Ratings* Ta=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC TJ, TSTG Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current - Continuous Operating and Storage Junction Temperature Range Parameter Value 75 75 7 500 -55 ~ +150 Units V V V mA °C * This ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These rating are based on a maximum junction temperature of 150 degrees C. 2) These are steady limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics Symbol PD RθJC RθJA Ta=25°C unless otherwise noted Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max. 1.0 8.0 125 50 Units mW mW/°C °C/W °C/W © 2007 Fairchild Semiconductor Corporation TN5320A Rev. 1.0.0 1 www.fairchildsemi.com TN5320A — PNP High Voltage Amplifier Electrical Characteristics* Ta=25×C unless otherwise noted Symbol Off Characteristics V(BR)CEO ICEX IEBO Collector-Emitter Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current IC = 100mA, IB = 0 VCE = 100 V, VBE = 1.5 V (rev.) VCE = 70 V, VBE = 1.5 V (rev.) T = +150 °C VEB = 7.0 V 75 100 5 100 V μA mA μA Parameter Test Condition Min. Max. Units On Characteristics hFE VCE(sat) VBE(on) DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Voltage VCE = 4.0 V, IC = 0.5 mA, VCE = 2.0 V, IC = 1.0 mA, IC = 500 mA, IB = 50 mA VCE = 4.0 V, IC = 500 mA 30 10 130 0.5 1.1 V V * Pulse Test: Pulse Width ≤ 300ms, Duty Cycle = 2% NOTES: 1) All voltages (V) and currents (A) are negative polarity for PNP transistors. © 2007 Fairchild Semiconductor Corporation TN5320A Rev. 1.0.0 2 www.fairchildsemi.com TN5320A TN5320A PNP High Voltage Amplifier TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I30 Preliminary First Production No Identification Needed Full Production Obsolete Not In Production © 2007 Fairchild Semiconductor Corporation TN5320A Rev. 1.0.0 3 www.fairchildsemi.com