ELI70-IRHW-M

User’s Manual ELI70-IRHW & ELI70-IRHW-M ELI70-IRHW ELI70-IRHW-M (includes brackets) Revision 1.02 Copyright ©2017, Future Designs, Inc., All Rights Reserved User’s Manual ELI70-IRHW Important Legal Information Information in this document is provided solely to enable the use of Future Designs, Inc. (FDI) products. FDI assumes no liability whatsoever, including infringement of any patent or copyright. FDI reserves the right to make changes to these specifications at any time, without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Future Designs, Inc. 996 A Cleaner Way, Huntsville, AL 35805. Microsoft, MS-DOS, Windows, Windows XP, Microsoft Word are registered trademarks of Microsoft Corporation. Other brand names are trademarks or registered trademarks of their respective owners. Printed in the United States of America. For more information on FDI or our products please visit www.TeamFDI.com. 2016 Future Designs, Inc. All rights reserved. FDI Document PN: MA00073 Revision: 1.02, 1/05/2017 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 2 of 11 User’s Manual ELI70-IRHW Important Legal Information .......................................................................................................................... 2 Introduction ......................................................................................................................................... 4 ELI70-IRHW Box Contents ................................................................................................................ 5 Optional Accessories Recommended for Use (Purchased Separately) ............................................... 5 ESD Warning ...................................................................................................................................... 5 Technical Specifications ..................................................................................................................... 6 Connectors ........................................................................................................................................... 7 Power Details ...................................................................................................................................... 7 Extended Display Information Data (EDID) ...................................................................................... 9 PWM Control of Backlight ................................................................................................................. 9 Support .............................................................................................................................................. 10 10.1 Where to Get Help ......................................................................................................................... 11 10.2 Useful Links .................................................................................................................................. 11 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 3 of 11 User’s Manual ELI70-IRHW Introduction About ELI (the Easy LCD Interface) ELI® is Future Designs, Inc.’s family of long-life, plug-and-play embedded displays. ELI products are true modular embedded display solutions that require no engineering or lead-time. All ELI products are compatible with a wide range of single board computers including Raspberry Pi, BeagleBone Black and Windows-based units. FDI designed ELI as an embedded display option that requires minimal development time to help customers reach production quickly. Once a product is in production, FDI’s 10-15 year ELI product availability guarantee helps ensure production schedules without the risk of expensive or time consuming redesigns. Learn more about ELI at TeamFDI.com/ELI. ELI Compatibility ELI products are compatible with most single board computers, PCs and operating systems. The table below illustrates the results of FDI’s compatibility tests with popular operating systems and platforms. Our results, as indicated in the table, demonstrate ELI’s versatility but the table is not exhaustive. ELI products are designed to work with any single board computer that has an HDMI or DVI output. To submit a question about ELI’s compatibility with a platform or operating system that is not included in the table, contact a member of the FDI support team at Support@teamfdi.com. Figure 1. Tested ELI Compatibility 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 4 of 11 User’s Manual ELI70-IRHW Your ELI Experience Share your experience connecting ELI devices to various (single board) computers at: http://www.teamfdi.com/edid/#edidform. ELI70-IRHW Box Contents   ELI70-IRHW Quick Start Guide Optional Accessories Recommended for Use (Purchased Separately)   12V DC +/-5% 2A Power Supply with a center positive barrel plug o 2.1mm I.D. x 5.5mm O.D. x 9.5mm USB Type A to Mini Type B Cable (For touch) ESD Warning Figure 2. Electrostatic Sensitive Device Our ELI units are shipped in a protective anti-static package. Do not subject the module to high electrostatic potentials. Exposure to high electrostatic potentials may cause damage to the boards that will not be covered under warranty. General practice for working with static sensitive devices should be followed when working with this device. 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 5 of 11 User’s Manual ELI70-IRHW Technical Specifications Table 1. Technical Specifications Screen Size (inches): Display Technology: Resolution: Brightness (nits typical): Contrast Ratio (typical): Aspect Ratio: Interface Input Mode: Colors: Horizontal Viewing Angle: Vertical Viewing Angle: Surface: Touch Screen: Touch Screen Interface: Touch Panel Hardness: Touch Panel Force (gF max): Active Area (in mm W x H): Response Time (ms): Backlight: Backlight Life (K hours typical): Backlight Power Consumption (mW Typical): Operating Temperature: Storage Temperature: Input Voltage: Power Consumption (ma typical/max) RoHS Compliant: Dimensions (in mm W x H x D) Mounting: Weight (grams) 1/5/2017 Copyright ©2017, Future Designs, Inc. 7 a-Si TFT LCD 800 x 480 (WVGA) 640 1000:1 16:9 HDMI/DVI 262K (18 bit) 85/85° 85/85° Anti-glare 4-Wire Resistive USB >3H 120 152.40 x 91.44 30 21 LED (7S x 3P) 70 3960 -30° to 80° C -40° to 90° C +12 VDC + 5% 600/900 Yes 166.10 x 108.20 x 29.0 M3-0.50 screws in 4 corners 360 Page 6 of 11 User’s Manual ELI70-IRHW Connectors Figure 3. ELI70-IRHW Connectors Power Details A 12VDC +/- 5% power supply with a 2.0A output will power any board from the ELI Family. This allows a common, off-the-shelf power supply such as the T1071-P5P-ND to be used for quick demos or prototyping across the entire ELI Family. In general, any 12VDC power supply with a 2.1mm center positive plug will be acceptable if it can provide enough current to power the particular ELI unit being used. On the ELI70-IRHW plug power into the (P2) connector. For volume production applications, the input power can be optimized for your particular ELI unit and lower capacity power supplies can be used. 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 7 of 11 User’s Manual ELI70-IRHW In cases where the barrel connector is not desired, you can use the alternate power input connector (J8) with supports directly plugging in 20-26 AWG wire with maximum 5A current per contact. The datasheet for this J8 connector (PCB terminal block - PTSM 0,5/ 2-2,5-H SMD WH R24 – 1814634) can be found at http://tinyurl.com/1814634. To verify that the ELI70-IRHW unit is correctly powered you may check the 12VDC input with a Fluke meter or scope by probing the +12V and GND contacts shown below. Please verify that the 12VDC is present, is within the +/- 5% tolerance and is free from excessive noise or AC ripple. Figure 4. ELI70-IRHW Power Test Points 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 8 of 11 User’s Manual ELI70-IRHW Extended Display Information Data (EDID) ELI uses Extended Display Identification Data (EDID) for automatic configuration with many operating systems. You can find out more on our website at http://www.teamfdi.com/edid/. PWM Control of Backlight Figure 5. PWM Backlight Control All ELI products are designed to reduce power consumption when required. To reduce the power consumption of the backlight/ELI, the user can connect an externally generated Pulse Width Modulated (PWM) signal to pin 2 of J5. This signal must be between 5KHz and 100KHz. On the ELI side we softly pull the PWM diming signal to LCD_VDD providing 100% backlight power when no PWM signal is applied at J5. In the ELI70-IRHW, power consumption can be controlled from 1.27W to 0.43W with the PWM signal. If the external system is capable of providing the PWM diming signal at 3.3V DC, there is no need to connect pin 1 to the cable. ELI provides this signal when the external system needs this voltage to generate the PWM diming signal. 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 9 of 11 User’s Manual ELI70-IRHW Bracket ELI70-IRHW-M comes with brackets to provide additional mounting options. The dimensions of the bracket and mounting holes are shown below for your reference. If necessary, the brackets can be removed or replaced by removing two screws on each side of the ELI display. 1/5/2017 Copyright ©2017, Future Designs, Inc. Page 10 of 11 User’s Manual ELI70-IRHW Support 11.1 Where to Get Help Online technical support is available at http://www.teamfdi.com/support/ 11.2 Useful Links      1/5/2017 Future Designs, Inc. Forums: http://www.teamfdi.com/forum ELI43-CP Product Page: http://www.teamfdi.com/product-details/eli70-irhw ELI Software User’s Manual: http://www.teamfdi.com/wp-content/uploads/ELI-SoftwareUsers-Manual.pdf Tell us about your ELI experience: http://www.teamfdi.com/edid/#edidform EDID Information Page: http://www.teamfdi.com/edid/ Copyright ©2017, Future Designs, Inc. Page 11 of 11