MRF5S19060NR1

Freescale Semiconductor Technical Data Document Number: MRF5S19060N Rev. 7, 10/2008 RF Power Field Effect Transistors N - Channel Enhancement - Mode Lateral MOSFETs Designed for broadband commercial and industrial applications with frequencies from 1930 to 1990 MHz. The high gain and broadband performance of these devices make them ideal for large - signal, common source amplifier applications in 28 Volt base station equipment. • Typical 2 - carrier N - CDMA Performance: VDD = 28 Volts, IDQ = 750 mA, Pout = 12 Watts Avg., 1990 MHz, IS - 95 (Pilot, Sync, Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain — 14 dB Drain Efficiency — 23% IM3 @ 2.5 MHz Offset — - 37 dBc in 1.2288 MHz Channel Bandwidth ACPR @ 885 kHz Offset — - 51 dBc in 30 kHz Channel Bandwidth • Capable of Handling 5:1 VSWR, @ 28 Vdc, 1960 MHz, 12 Watts CW Output Power Features • Characterized with Series Equivalent Large - Signal Impedance Parameters • Internally Matched for Ease of Use • Integrated ESD Protection • 200°C Capable Plastic Package • N Suffix Indicates Lead - Free Terminations. RoHS Compliant. • In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel. MRF5S19060NR1 MRF5S19060NBR1 1930- 1990 MHz, 12 W AVG., 28 V 2 x N - CDMA LATERAL N - CHANNEL RF POWER MOSFETs CASE 1486 - 03, STYLE 1 TO - 270 WB - 4 PLASTIC MRF5S19060NR1 CASE 1484 - 04, STYLE 1 TO - 272 WB - 4 PLASTIC MRF5S19060NBR1 Table 1. Maximum Ratings Rating Drain- Source Voltage Gate- Source Voltage Total Device Dissipation @ TC = 25°C Derate above 25°C Storage Temperature Range Operating Junction Temperature Symbol VDSS VGS PD Tstg TJ Value - 0.5, +65 - 0.5, +15 218.8 1.25 - 65 to +175 200 Unit Vdc Vdc W W/°C °C °C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 75°C, 12 W CW Symbol RθJC Value (1,2) 0.80 Unit °C/W 1. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 2. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2008. All rights reserved. MRF5S19060NR1 MRF5S19060NBR1 1 RF Device Data Freescale Semiconductor Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 1C (Minimum) C (Minimum) IV (Minimum) Table 4. Moisture Sensitivity Level Test Methodology Per JESD 22 - A113, IPC/JEDEC J - STD - 020 Rating 3 Package Peak Temperature 260 Unit °C Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 65 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate- Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 225 μAdc) Gate Quiescent Voltage (VDS = 28 Vdc, ID = 750 mAdc) Drain- Source On - Voltage (VGS = 5 Vdc, ID = 2.25 Adc) Forward Transconductance (VDS = 10 Vdc, ID = 2.25 Adc) Dynamic Characteristics (1) Reverse Transfer Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss — 1.5 — pF VGS(th) VGS(Q) VDS(on) gfs 2.5 — — — — 3.8 0.26 5 3.5 — — — Vdc Vdc Vdc S IDSS IDSS IGSS — — — — — — 10 1 1 μAdc μAdc μAdc Symbol Min Typ Max Unit Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 750 mA, Pout = 12 W Avg., f1 = 1987.5 MHz, f2 = 1990 MHz, 2 - carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carriers. ACPR measured in 30 kHz Channel Bandwidth @ ±885 kHz Offset. IM3 measured in 1.2288 MHz Channel Bandwidth @ ±2.5 MHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain Drain Efficiency Intermodulation Distortion Adjacent Channel Power Ratio Input Return Loss Typical RF Performance (50 ohm system) Pulse Peak Power (VDD = 28 Vdc, 1 - Tone CW Pulsed, IDQ = 750 mA, tON = 8 μs, 1% Duty Cycle) Video Bandwidth (VDD = 28 Vdc, Pout = 60 W PEP, IDQ = 750 mA, Tone Spacing = 1 MHz to VBW, Δ IM3