MRFE6S9060NR1

Freescale Semiconductor Technical Data Document Number: MRFE6S9060N Rev. 1, 10/2007 RF Power Field Effect Transistor N - Channel Enhancement - Mode Lateral MOSFET Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of this device makes it ideal for large - signal, common - source amplifier applications in 28 volt base station equipment. • Typical Single - Carrier N - CDMA Performance @ 880 MHz, VDD = 28 Volts, IDQ = 450 mA, Pout = 14 Watts Avg., IS - 95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain — 21.1 dB Drain Efficiency — 33% ACPR @ 750 kHz Offset — - 45.7 dBc in 30 kHz Channel Bandwidth • Capable of Handling 10:1 VSWR, @ 32 Vdc, 880 MHz, 3 dB Overdrive, Designed for Enhanced Ruggedness GSM EDGE Application • Typical GSM EDGE Performance: VDD = 28 Volts, IDQ = 500 mA, Pout = 21 Watts Avg., Full Frequency Band (920 - 960 MHz) Power Gain — 20 dB Drain Efficiency — 46% Spectral Regrowth @ 400 kHz Offset = - 62 dBc Spectral Regrowth @ 600 kHz Offset = - 78 dBc EVM — 1.5% rms GSM Application • Typical GSM Performance: VDD = 28 Volts, IDQ = 500 mA, Pout = 60 Watts, Full Frequency Band (920 - 960 MHz) Power Gain — 20 dB Drain Efficiency — 63% Features • Characterized with Series Equivalent Large - Signal Impedance Parameters • Integrated ESD Protection • 225°C Capable Plastic Package • RoHS Compliant • In Tape and Reel. R1 Suffix = 500 Units per 24 mm, 13 inch Reel. Table 1. Maximum Ratings Rating Drain - Source Voltage Gate - Source Voltage Maximum Operation Voltage Storage Temperature Range Case Operating Temperature Operating Junction Temperature (1,2) Symbol VDSS VGS VDD Tstg TC TJ MRFE6S9060NR1 880 MHz, 14 W AVG., 28 V SINGLE N - CDMA LATERAL N - CHANNEL BROADBAND RF POWER MOSFET CASE 1265- 09, STYLE 1 TO - 270 - 2 PLASTIC Value - 0.5, +66 - 0.5, + 12 32, +0 - 65 to +150 150 225 Unit Vdc Vdc Vdc °C °C °C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 80°C, 60 W CW Case Temperature 78°C, 14 W CW Symbol RθJC Value (2,3) 0.77 0.88 Unit °C/W 1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf . Select Tools (Software & Tools)/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf . Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2007. All rights reserved. MRFE6S9060NR1 1 RF Device Data Freescale Semiconductor Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 2 (Minimum) B (Minimum) III (Minimum) Table 4. Moisture Sensitivity Level Test Methodology Per JESD 22 - A113, IPC/JEDEC J - STD - 020 Rating 3 Package Peak Temperature 260 Unit °C Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 66 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate - Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 200 μA) Gate Quiescent Voltage (VDD = 28 Vdc, ID = 450 mAdc, Measured in Functional Test) Drain - Source On - Voltage (VGS = 10 Vdc, ID = 1.5 Adc) Dynamic Characteristics Reverse Transfer Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Input Capacitance (VDS = 28 Vdc, VGS = 0 Vdc ± 30 mV(rms)ac @ 1 MHz) Crss Coss Ciss — — — 1.1 33 109 — — — pF pF pF VGS(th) VGS(Q) VDS(on) 1 2 0.05 2.2 3 0.27 3 4 0.4 Vdc Vdc Vdc IDSS IDSS IGSS — — — — — — 10 1 10 μAdc μAdc μAdc Symbol Min Typ Max Unit Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 450 mA, Pout = 14 W Avg., f = 880 MHz, Single - Carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carrier. ACPR measured in 30 kHz Channel Bandwidth @ ±750 kHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF Power Gain Drain Efficiency Adjacent Channel Power Ratio Input Return Loss Gps ηD ACPR IRL 20 30.5 — — 21.1 33 - 45.7 - 18 23 — - 44 -9 dB % dBc dB (continued) MRFE6S9060NR1 2 RF Device Data Freescale Semiconductor Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued) Characteristic Symbol Min Typ Max Unit Typical GSM EDGE Performances (In Freescale GSM EDGE Test Fixture Optimized for 920 - 960 MHz, 50 ohm system) VDD = 28 Vdc, IDQ = 500 mA, Pout = 21 W Avg., f = 920 - 960 MHz, GSM EDGE Signal Power Gain Drain Efficiency Error Vector Magnitude Spectral Regrowth at 400 kHz Offset Spectral Regrowth at 600 kHz Offset Gps ηD EVM SR1 SR2 — — — — — 20 46 1.5 - 62 - 78 — — — — — dB % % dBc dBc Typical CW Performances (In Freescale GSM Test Fixture Optimized for 920 - 960 MHz, 50 ohm system) VDD = 28 Vdc, IDQ = 500 mA, Pout = 60 W, f = 920 - 960 MHz Power Gain Drain Efficiency Input Return Loss Pout @ 1 dB Compression Point (f = 940 MHz) Gps ηD IRL P1dB — — — — 20 63 - 12 67 — — — — dB % dB W Typical Performances (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 450 mA, 865 - 900 MHz Bandwidth Video Bandwidth @ 60 W PEP Pout where IM3 = - 30 dBc VBW (Tone Spacing from 100 kHz to VBW) — 3 — ΔIMD3 = IMD3 @ VBW frequency - IMD3 @ 100 kHz