SL13A

SL12A thru SL110A Surface Mount Schottky Rectifiers Reverse Voltage 20-100V Forward Current 1A Features  Low forward voltage drop  Low leakage current  Moisture sensitivity: level 1, per J-STD-020  Ideal for automated placement  Meets environmental standard MIL-S-19500D  Solder dip 275 °C, 10s Package: DO-214AC (SMA) Applications For use in general purpose rectification of lighting, power supply, inverter, converter and freewheeling diodes for consumer, automotive and telecommunication. Maximum Ratings (TA = 25°C unless otherwise noted) Symbol SL12A SL13A SL14A SL15A SL16A SL17A SL18A SL19A SL110A Unit Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 70 80 90 100 V Maximum RMS Voltage VRMS 14 21 28 35 42 49 56 63 70 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 70 80 90 100 V Parameter Maximum Average Forward Rectified current at TL (See Fig.1) Peak Forward Surge Current (8.3 ms single half sine-wave superimposed on rated load) Operating Junction Temperature Range Storage Temperature Range IF(AV) 1 A IFSM 45 A TJ - 55 to + 125 Maximum Instantaneous Forward Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance Maximum Thermal Resistance Test Conditions IF=1 A Symbol VF 4.0 V, 1 MHz °C (TA = 25°C unless otherwise noted) SL12A SL13A SL14A 0.42 SL15A SL16A SL17A SL18A SL19A 0.68 0.50 TA=25°C TA=100°C °C - 55 to + 150 TSTG Electrical Characteristics Parameter - 55 to + 150 SL110A Unit V 0.2 IR 10 mA CJ 85 pF RθJA1 80 °C/W RθJT 2 16 °C/W Notes: (1) Thermal resistance from junction to ambient,0.197×0.197 inch （5.0×5.0mm）copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.197×0.197 inch（5.0×5.0mm）copper pads to each terminal 1/3 SL12A thru SL110A Surface Mount Schottky Rectifiers Reverse Voltage 20-100V Forward Current 1A Ratings and Characteristics Curves (TA = 25°C unless otherwise noted) Figure 1. Forward Current Derating Curve Figure 2.Maximum Non‐repetitive Peak Forward Surge  Current    Figure 3. Typical Instantaneous Forward Characteristics  Figure 4. Typical Reverse Characteristics  Figure 5. Typical Junction Capacitance  2/3 SL12A thru SL110A Surface Mount Schottky Rectifiers Reverse Voltage 20-100V Forward Current 1A Package Outline Dimensions SMA(DO-214AC) HE E D B DIM C L A1 A cathode band A A1 B C D E HE L SMA (DO-214AC) Millimeters Inches Min. Min. Max. Max. 0.075 0.091 1.90 2.30 0.000 0.008 0.20 0.00 0.049 0.065 1.25 1.65 0.006 0.012 0.15 0.31 0.093 0.114 2.35 2.90 0.181 0.157 3.99 4.60 0.189 0.209 4.80 5.30 0.030 0.060 0.76 1.52 Recommended Pad Layout K J M www.goodarksemi.com M Recommended Pad Layout (Reference ONLY) Millimeters Inches DIM Min. Max. Min. Max. J 2.20 0.087 K 1.72 0.068 M 2.00 0.079 - 3/3 Doc.USSL12A-SL110AxSD3.2 Aug.2022