GP9973

Pb Free Plating Product ISSUED DATE :2005/08/04 REVISED DATE : GP9973 N-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID 60V 80m 3.9A The GP9973 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. *Simple Drive Requirement *Low Gate Charge Description Features Package Dimensions D GAUGE PLANE E REF. A A1 A2 b b1 b2 b3 c A Millimeter Min. Max. 0.381 2.921 0.356 0.356 1.143 0.762 0.203 0.5334 4.953 0.559 0.508 1.778 1.143 0.356 REF. c1 D E E1 e HE L Millimeter Min. Max. 0.203 0.279 9.017 10.16 6.096 7.112 7.620 8.255 2.540 BSC 10.92 2.921 3.810 SEATING PLANE Z Z b L SECTION Z - Z b e DIP-8 Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current , VGS@10V Continuous Drain Current , VGS@10V Pulsed Drain Current 1,2 3 3 c Symbol VDS VGS ID @TA=25 : ID @TA=70 : IDM PD @TA=25 : Tj, Tstg Ratings 60 f 20 3.9 2.5 20 2 0.016 -55 ~ +150 Unit V V A A A W W/ Total Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Thermal Data Parameter Thermal Resistance Junction-ambient 3 Symbol Max. Rthj-amb Value 62.5 Unit /W GP9973 Page: 1/4 ISSUED DATE :2005/08/04 REVISED DATE : Electrical Characteristics(Tj = 25 Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Unless otherwise specified) Min. 60 1.0 Typ. 0.06 3.5 8 2 4 8 4 20 6 700 80 50 Max. 3.0 D 100 1 25 80 100 13 1120 pF ns nC Unit V V/ : V S nA uA uA mŁ Test Conditions VGS=0, ID=250uA Reference to 25 : , ID=1mA VDS=VGS, ID=250uA VDS=10V, ID=3.9A 20V VGS= D VDS=60V, VGS=0 VDS=48V, VGS=0 VGS=10V, ID=3.9A VGS=4.5V, ID=2.0A ID=3.9A VDS=48V VGS=4.5V VDS=30V ID=1A VGS=10V RG=3.3 Ł RD=30 Ł VGS=0V VDS=25V f=1.0MHz Symbol BVDSS BVDSS / Tj Gate Threshold Voltage Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 : ) Drain-Source Leakage Current(Tj=70 : ) VGS(th) gfs IGSS IDSS Static Drain-Source On-Resistance2 Total Gate Charge2 Gate-Source Charge Gate-Drain (“Miller”) Change Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance RDS(ON) Qg Qgs Qgd Td(on) Tr Td(off) Tf Ciss Coss Crss Source-Drain Diode Parameter Forward On Voltage 2 Symbol VSD Trr Qrr Min. - Typ. 28 25 Max. 1.2 - Unit V ns nC Test Conditions IS=3.9A, VGS=0V IS =3.9A, VGS=0V dI/dt=100A/ s Reverse Recovery Time Reverse Recovery Charge Notes: 1. Pulse width limited by Max. junction temperature. 2. Pulse width 300us, duty cycle 2%. 3. Mounted on 1 in2 copper pad of FR4 board; 90 : /W when mounted on Min. copper pad. GP9973 Page: 2/4 ISSUED DATE :2005/08/04 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristics of Reverse Diode GP9973 Fig 6. Gate Threshold Voltage v.s. Junction Temperature Page: 3/4 ISSUED DATE :2005/08/04 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GP9973 Page: 4/4